Design Guidelines I. Dimensions for both ends of the conveyor. A typical arrangement of DOUBLE PLUS ® components is illustrated in Fig. 3. The bracket is used to mount the plastic return guide to the aluminum guide rail, allowing the chain to flow smoothly between the sprocket and guide rail. See Table 5a for dimensions.
II. Screws, bolts, height of conveyor.
The values for L shown in Table 5b and Fig. 4 vary because of the plastic bumper wall thickness tolerance. Connecting the aluminum guide rail Connect the aluminum guide rails by aligning the V groove shown by arrow A in Fig. 4. Installing the pallet guide rail Drill holes using the V groove as a guide, shown by arrow B in Fig. 4, and install the pallet guide rail using socket head cap screws from Table 5b.
Figure 3–Typical arrangement of DOUBLE PLUS ® components
Figure 4–Location of screws, bolts
Table 5a. Conveyor End Dimensions Units-in. (mm)
Chain No.
Z
L 1
L 2
L 2
H
(Driver side) (Driven side)
Table 5b. Screws, Bolts, Height of Conveyor Units-in. (mm)
C2030VRP-R3L
0.839
1.57 (40)
8.27
3.15 0.98
C2030VRP-R3LS (21.3)
(210)
(80)
(25)
C2040VRP-R4L
0.579
1.97 (50)
11.81 (300)
3.94 0.98
Rail No.
1
2
3
4
5
H
L
C2040VRP-R4LS (14.7)
(100)
(25)
C2030VRP-R3L M6 x 10 l M6 M5 M6 M5 2.42
0.57
C2030VRP-R3LS
(61.5)
(14.5)
C2050VRP-R4L 0.634 C2050VRP-R4LS (16.1) C2050VRP-R3H 3.000 C2050VRP-R3HS (76.2)
2.36 (60)
13.39 (340)
4.72 1.18
C2040VRP-R4L M6 x 12 l M6 M6 M8 M6 2.68
1.12
(120)
(30)
C2040VRP-R4LS
(68)
(28.5)
C2050VRP-R4L M8 x 20 l M8 M8 M10 M8 3.25
1.42 (36) 1.46 (37)
C2050VRP-R4LS
(82.5)
C2060VRP-R4K
0.587
2.76 (70)
16.93 (430)
5.12 1.57
C2050VRP-R3H M8 x 20 l M8 M8 M10 M8 5.61
C2060VRP-R4LS (14.9)
(130)
(40)
C2050VRP-R3HS
(142.5)
C2060VRP-R4K C2060VRP-R4L M8 x 20 l M8 M8 M10 M8 3.74
C2080VRP-R3LS 0.945
3.94
21.65 (550)
7.87 2.36
1.75
(24)
(100)
(200)
(60)
C2060VRP-R4LS
(95)
(44.5)
C2080VRP-R3LS M8 x 25 l M8 M8 M10 M8 5.12
1.85 (47)
(130)
16
Made with FlippingBook Digital Proposal Creator