Figure 7b–Cross section of C2040VRP-C2080VRPframe with steel rail Lock screws (no. 4) are secured through the inner rail (no. 2), which anchors the steel rail (no. 3) to the frame (no. 1) (see Fig. 7b). See Table 5d for dimensions and hardware. Design Guidelines
Table 5d. Aluminum Frame with Steel Rail Units-in. (mm)
Steel rail (Part No. 3)
Installation screws for steel rail (Part No. 4).
Installation screws for steel rail (Part No. 5).
Dimensions
(Plate thickness x width)
“A” dimension
philips pan head machine screws
philips flat head machine screws
Rail No.
in. (mm)
in. (mm)
C2030VRP-R3LS
.12 x .51 (3 x 13)
.187 (4.75)
M3 x 7 l
—
C2040VRP-R4LS
.12 x .51 (3 x 13)
.315 (8.0)
M4 x 5 l
M4 x 6 l
C2050VRP-R4LS
.12 x .51 (3 x 13)
.315 (8.0)
M4 x 6 l
M4 x 6 l
C2050VRP-R3HS
.12 x .51 (3 x 13)
.315 (8.0)
M4 x 6 l
M4 x 6 l
C2060VRP-R4LS
.12 x .51 (3 x 13)
.315 (8.0)
M4 x 6 l
M4 x 6 l
C2080VRP-R3LS
.24 x .63 (6 x 16)
.413 (10.5)
M5 x 8 l
M6 x 10 l
(2) Assembly drawing When joining rail sections to form a longer conveyor, please refer to Fig. 8. Figure 8–Assembly Drawing
1) The steel rail is cut at an angle of 45° at the center portion of the main rail. 2) The installation spacing for C2030VRP-R3LS steel rail is the same as that for C2050VRP-R3HS and C2080VRP-R3LS.
Table 5e. Steel Rail Assembly Dimensions Units-in. (mm) Rail No. A B C
D E
F
C2040VRP-R4LS C2050VRP-R4LS 157.5 C2060VRP-R4LS (4000) C2050VRP-R3LS 118.1 C2080VRP-R3LS (3000)
1.18 19.09
(30)
(485)
19.09 2.36 1.18
0.59 18.90 (485)
(60)
(30)
(15)
(480)
18
Made with FlippingBook Digital Proposal Creator