The chain consistes of two parallel strands of 40 chain with 3/4” diameter live tubular rollers on 1” (every second pitch) spacing. The chains can be placed at the end of any intermediate point of a line where speed variations of conveyed goods may occur. Placed next to slicing or wrapping machines, they act as accumulators. Each chain is assembled with connecting pins acting as tie bars every 12”. The pins have milled flats and fit into a D-shaped hole in the link plate to prevent pin rotation and give longer life. Chains are furnished in 10’ sections. The tubular rollers rotate on either oil impregnated iron or plastic bearings. Removeable two-pitch connecting links are available. LIVE TUBULAR CHAINS
Crossrod conveyor chain consists of two parallel strands of standard 40 or 50 roller chains, joined by crossrods on every link. 40 chain is used for light loads such as conveying bread through coolers, wrappers or slicers. 50 chain is used in heavier loads. When sanitary, non-corrosive qualities are desired, stainless steel crossrods are available. Connecting pins have milled flat ends and fit into a D-shaped hole in the link plate to prevent pin rotation and to provide longer life. Chains are furnished in five-foot sections and run on standard roller chain sprockets. Removeable two-pitch link sections are available for repair and replacement needs. How to Order: Chains are available in carbon steel and stainless. Crossrods may be ordered in carbon steel or stainless. One connecting pin is supplied with each chain section for connection. Additonal pins may be ordered separately. Specify chain number and material combination needed. All sprockets should be keyed in line in pairs to evenly distribute loads to both chains. CROSSROD CHAINS
CROSS ROD CHAINS
How to order: Chains, connecting links and rollers are also available in nickle plated or stainless steel. Either a plastic or an oil-impregnated bearing must also be specified. Chains and connecting links are ordered separately. One connecting pin is supplied with each chain section or connecting link. Additional pins may be ordered separately. Specify chain number and the material/bearing combion desired.
A D B
C
A D B
C
40 Roller chain with .500 pitch and .156 pin diameter
50 roller chain with .625 pitch and .200 pin diamater
Plate to Plate Width
Average Weight Lbs/ft
Plate to Plate Width
Average Weight Lbs/ft
Nominal Width
Overall Riveted
Pin Head to end
Roller CL to CL
Nominal Width
Overall Riveted
Pin Head to end
Roller CL to CL
RS40 chain with .500 pitch, .750” Roller Diameter
Nominal Width Plate to Plate Width Overall Riveted
Pin Head to End
Roller CL to CL
Average Weight Lbs/Ft
Chain Number
A
B
C
D
Chain Number
A
B
C
D
Chain No. TP329-12 TP329-15 TP329-18 TP329-21 TP329-24 TP329-30
A
B
C
D
P329-12
P800-12
12
11.25
12.44
12.51
11.812
2.0
12
11.10
12.60
12.67
11.812
2.2
12 15 18 21 24 30
11.25 14.25 17.25 20.25 23.25 29.25
12.44 15.44 18.44 21.44 24.44 30.44
12.51 15.51 18.51 21.51 24.51 30.51
11.812 14.812 17.812 20.812 23.812 29.812
4.3 5.3 6.2 7.2 7.6 9.1
P329-15
P800-15
15
14.25
15.44
15.51
14.812
2.6
15
14.10
15.60
15.67
14.812
2.8
P329-18
P800-18
18
17.25
18.44
18.51
17.812
3.1
18
17.10
18.60
18.67
17.812
3.3
P329-21
P800-21
21
20.25
21.44
21.51
20.812
3.4
21
20.10
21.60
21.67
20.812
3.6
P329-24
P800-24
24
23.25
24.44
24.51
23.812
3.8
24
23.10
24.60
24.67
23.812
4.1
P329-30
P800-30
30
29.25
30.44
30.51
29.812
4.7
30
29.10
30.60
30.67
29.812
4.9
Dimensions in inches
Dimensions in inches
Dimensions in inches
Single Cottered Connecting Pins
Two-Pitch Connecting Links
Single Cottered Connecting Pins Chain No.
Two-Pitch Connecting Links Chain No.
Nominal Width
40 Chain
50 Chain
Nominal Width
40 Chain
50 Chain Nominal Width
Nominal Width
TP329-RS12 TP329-RS15 TP329-RS18 TP329-RS21 TP329-RS24 TP329-RS30
12 15 18 21 24 30
TP329-CP12 TP329-CP15 TP329-CP18 TP329-CP21 TP329-CP24 TP329-CP30
12 15 18 21 24 30
P329-CP12 P800-CP12
P329-RS12 P800-RS12
12
12
P329-CP15 P800-CP15
P329-RS15 P800-RS15
15
15
P329-CP18 P800-CP18
P329-RS18 P800-RS18
18
18
P329-CP21 P800-CP21
P329-RS21 P800-RS21
21
21
P329-CP24 P800-CP24
P329-RS24 P800-RS24
24
24
Dimensions in inches
P329-CP30 P800-CP30
P329-RS30 P800-RS30
30
30
Dimensions in inches
Dimensions in inches
Dimensions in inches
127
128
Made with FlippingBook Digital Proposal Creator