A Mountz Loading Bench provides engineers and metrology professionals with a precision, laboratory-grade solution for effortless and accurate torque wrench calibration and presetting. Designed to simplify calibration processes, these loading benches deliver consistent, repeatable results across torque ranges up to 2500 lbf.ft. Torque wrenches require regular calibration to maintain accuracy and avoid errors in assembly processes. The Mount Loading Bench enables faster operator calibration by minimizing user-induced errors and transducer misalignment, ensuring reliable torque application every time.
MANUAL REV 1 (8/1/2025)
LB1000F LOADING BENCH
Phone: 408.292.2214
www.mountztorque.com
LB1000F LOADING BENCH INSTRUCTIONS
0F LOADING BENCH OPERATING
Rev 1.0 (9/15/2025)
What's Included: Loading Bench and hardw Accessories sold separately: Mountz torque analyzer, BMX torque sensor and
ware for mounting the BMX torque sensor. Mountz torque analyzer, BMX torque sensor and cable for BMX torque sensor. cable for BMX torque sensor.
Reaction Position Horizontally: 4.87” to 77” from the center of the turn Vertically: 2.25” to 10” from the turn-table base Ratio (1:663)
” from the center of the turn-table table base
Mounting the LB1000F The LB1000F can be operated on a stable, level workbench. bench can be attached to the work table. To attach to a workbench, use 3/8" the underside of the workbench and thread into the can be operated on a stable, level workbench. For additional security, the loading bench can be attached to the work table. To attach to a workbench, use 3/8"-16 fasteners from the underside of the workbench and thread into the thread inserts in the footpads.
Keep flush with
bench edge
Torque Sensor Set-up Attach the BMX to the the rotating baseplate usin Attach the BMX to the the rotating baseplate using the correct hardware provided.
Base Plate
Make sure the wrench is within the torque range of the BMX model. If the tool is under the torque range, then the accuracy may not be reliable. If the tool is over the torque range, then you may overtorque the BMX and damage the sensor.
Reaction Bars
Attach the sensor cable (sold separately) for connecting the BMX with a Mountz torque analyzer with an external sensor connection cable (sold separately) for connecting the BMX with a Mountz with an external sensor connection.
Once the BMX is connected with the torque analyzer, follow the instructions in the torque analyzer manual for accessing external transducers the torque analyzer manual for accessing external transducers.
Calibrating & Testing Torque Wrenches Wrenches
Hand Wheel
Place the wrench’s drive into the BMX’s female square drive. bars to secure the grip of the wrench handle. Place the wrench’s drive into the BMX’s female square drive. Adjust the position of the reaction bar by sliding along the sliding bars to secure the grip of the wrench handle. Use the bottom and top locking clamps to secure the wrench handle so its level. wheel clockwise. This will rotate the sensor until the wrench's pre-adjusted torque is reached with a click. Record the torque reading from the analyzer and compare against the pre-adjusted torque on the wrench. the load by turning the wheel in the opposite direction. Adjust the position of the reaction bar by sliding along the sliding Use the bottom and top locking clamps to secure the wrench handle so its level. adjusted torque is reached with a click. adjusted torque on the wrench. Once the desired Turn the hand wheel clockwise. This will rotate the sensor until the wrench's pre Record the torque reading from the analyzer and compare against the pre torque is reached, back off the load by turning the wheel in the opposite direction.
SILICON VALLEY HEADQUARTERS 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292-2214 | Fax: (408) 292-2733 | mountztorque.com
1
Maintenance
Grease worm gear set 1x per year or every 1,000 cycles Grease side gear train every 3 years or 3000 cycles Inspect bearings for excess play every 3 years or 3000 cycles. Use a moly-grade, anti-seize grease Mountz Calibration and Repair Services Mountz Inc. features an experienced calibration and repair staff. Our Mountz Inc. features an experienced calibration and repair staff. Our trained technicians can calibrate and repair almost any tool. Mountz provides rapid service with quality that you can trust as we offer two state-of-the-art calibration labs and repair facilities that can calibrate up to 20,000 lbf.ft. About Mountz Mountz, The Torque Tool Specialists ® , has been a leader in the torque tool industry for more than 60 years. Engineered in the Silicon Valley and serving the globe, Mountz focuses on delivering high-quality torque products, services, and solutions to ensure custo proceed with confidence. We are committed to forging a safer world through precision and accuracy and by innovating every day. quality torque products, services, and solutions to ensure customers can always The Mountz Advantage Products for Industry Experts by Torque Experts We are torque experts. Our tools offer customization options, allowing you to tailor them to your requirements. ase side gear train every 3 years or 3000 cycles seize grease art calibration labs and repair facilities that can calibrate up to
Mountz Service Locations
Eastern 19051 Underwood Rd. Eastern Service Center Foley, AL 36535 Phone: (251) 943 Fax: (251) 943 Phone: (251) 943-4125 Fax: (251) 943-4979 Western Service Center 1080 N.11th Street San Jose, CA Phone: (408) 292 Fax: (408) 292 UK Service Center Pier Copse Courtyard, Milland Lane, Liphook, Hampshire, GU30 7JN, UK Phone: 00 44 1428 741756 San Jose, CA 95112 Phone: (408) 292-2214 Fax: (408) 292-2733
www.mountztorque.com
Experienced Human, Customer Support We take the time to understand your application needs and make recommendations based on industry experienc We take the time to understand your application needs and make recommendations based on industry experience.
Tools Built to Last Preventing downtime is critical for success. Durability is at the core of what we do. Our tools are built to last and undergo extensive testing to ensure they meet the highest standards. Mountz Support North America: + 1.408.850.9978 International: + 44.1428.741756 mountztorque.com Mountz offers product implementation support and additional technical support beyond our standard service agreement. Please contact our applications or customer experience teams for additional support. 9978 International: + 44.1428.741756 mountztorque.com
Scan for Warranty & Returns Policy
SILICON VALLEY HEADQUARTERS 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292-2214 | Fax: (408) 292-2733 | mountztorque.com
2
Page 1 Page 2 Page 3Made with FlippingBook Annual report maker