Safety training
GWO Basic Safety Training / V20 23022026
ELEMENT 2.4 - SKILL STATION: WORK POSITIONING
Learning objective:
18) The participants can take responsibility for the safe and correct use of work positioning lanyards (Ability, intermediate level)
19) The participants can perform the correct attachment of work positioning lanyards to harness attachment points (front, dorsal or side D-rings) (Skills, intermediate level)
The participants shall:
Use a work positioning lanyard to leave their hands free for work
Attach work positioning lanyards correctly:
a. To the ladder stiles and, where clearly identified as suitable, to reinforced ladder rungs. In all other cases, the hooks should be connected around the stiles.
a.i If rungs are not suitable, slings must be connected around the stiles, positioned on one side and centrally on ladder system, to ensure the moving parts of the device can operate freely
b.
To certified and structural anchor points
Demonstrate how to correctly attach work positioning lanyards to the harness (front attachment point, and in both side, D-rings at once)
ELEMENT 2.5 - SKILL STATION: FALL ARREST LANYARDS
Learning objectives:
20) The participants can take responsibility for the safe and correct use of fall arrest lanyards while showing awareness of fall factors (Ability, intermediate level)
21) The participants can perform the correct attachment of fall arrest lanyards to harness attachment points (front, dorsal or side D-rings) (Skills, intermediate level)
The participants shall:
Explain how to use a double, twin and single fall arrest lanyard
Global Wind Organisation ©2025/ www.globalwindsafety.org
214 / 407
Made with FlippingBook - Online magazine maker