Safety training
GWO Basic Safety Training / V20 23022026
Attach work positioning lanyards correctly:
a. To the ladder stiles and, where clearly identified as suitable, to reinforced ladder rungs. In all other cases, the hooks should be connected around the stiles.
b.
To certified and structural anchor points
Demonstrate how to correctly attach fall arrest lanyards to the harness (front or dorsal attachment point) according to manufacturer’s user manual and relevant country-specific requirements or restrictions
In addition to manufacturers requirements, internal organisational and site-specific safety guidelines on attaching fall arrest lanyards should always be followed
Note
ELEMENT 2.6 - SKILL STATION: RESCUE KIT AND EVACUATION
Learning objectives:
22) The participants can perform the correct use of the rescue device in passive and active mode (Skills, intermediate level)
The participants shall:
Perform a pre-use inspection of rescue and evacuation kits
Choose appropriate anchor points to attach the rescue device
a. Demonstrate how to rig the device onto a ladder stile and, where identified as suitable, onto reinforced ladder rungs.
b. If the rungs are not suitable, slings must be connected around the stiles, positioned on one side and centrally on the ladder system, to ensure the moving parts of the device can operate freely
Perform active-mode single evacuation
Perform passive-mode double evacuation
Alongside manufacturers requirements, internal organisational and site-specific safety guidelines on attaching fall arrest lanyards should always be followed
Note
Global Wind Organisation ©2025/ www.globalwindsafety.org
215 / 407
Made with FlippingBook - Online magazine maker