DALLAS LOS ANGELES BALTIMORE
WHAT ARE MY OPTIONS? A COMPREHENSIVE GUIDE TO GATE OPTIONS AND COMPONENTS
WHAT DO I NEED TO BUILD A GATE?
GATE LATCH 30-21
POST 74-P83X3-11
This heavy duty gravity gate has no screw holes and a mill finish. The latch is made from 14 gauge steel and weldable to most metal substrates.
This post is a
standard 3"x3" square that can be cut to size as needed. They range in widths from 2" to 6" wide. Each is powder
SWING GATE OPTIONS
POST CAP 45-3002-3
coated and galvanized in a protective layer of zinc to prevent rusting.
A newel post finial that is made of cast iron. The finial fits over 3" square pipe or tubing. We have post caps that
fit any square post from 2" to 6" wide.
44-2005-ADJ CANE BOLT 30-6020
Heavy duty cane bolts are made
of premium solid steel, sturdy and
HINGES 44-2003
This barrel hinge is made in the USA and
durable. The surface is
is 5" high, with a 1"x2" weld pad, stainless steel pin with ball bearing, with a 1-3/4"
powder coated to prevent rust and corrosion. This cane bolt can
installation gap. The hinge weighs 2.75 lbs. Each hinge has been
be used for a long time outdoors, even in
bad weather. Cane bolts are used to secure single or double gates with stability. Control whether your gates stay open or closed by dropping a cane bolt. Simply rotate the rod and allow it to fall to the ground to hold the gate in position.
lubricated with standard machine grease inside and out for best performance. All barrell hinges are sold in pairs.
1
HINGES 44-2005-ADJ 44-2003-ADJ
POST CAP 45-334-2
These weld-on adjustable J-bolt ball bearing barrel hinges are made of steel and are available in sizes 5/8" inch and 3/4" inch. They have a weight capacity of at least 300 lbs and a maximum of 600 lbs.
This cast iron post cap has a stylish pawn shaped
design. It’s made to fit over a circular 2" x 2" pipe. There are also similar options for 3" 4" and 6" pipes.
22-LK50-LUK GATE LATCH
Ornamental lock with aluminum housing and
stainless steel mechanism, requires a 3-3/8" spacing to the first picket and will fit nicely into most gates. The latch and dead bolt have 3/8" continuous adjustment to allow perfect alignment.
SPRING ROLLER
30-500
This gate roller wheel offers a heavy duty spring and a 3" swivel caster with bear- ing. This spring loaded roller is 16" high and will carry a maximum weight of 100 pounds. Supplied in a mill finish.
PIPE
69-2X40-21BPE
PIPE FLANGE 46-642-NH
This pipe is a standard 2" x 2" cylinder that can be cut to size as needed. They range in widths from 2" to 6" wide. Each is made of raw black steel. These may require a flange in order to be anchored to a substrate.
This 2” diameter flange is great for creating a strong base for a pipe-style post, and a sturdy anchor for whatever substrate
you choose to affix your swing gate to. It’s unthreaded and doesn’t have pre-drilled screwholes.
2
DALLAS LOS ANGELES BALTIMORE
30-6024 CANE BOLTS
POSTS
Cane Bolt w/ (2) brackets
Extra Heavy Duty Cane Bolt 3/4" Bolt
Powder coated, premium weld inside & outside 4 step galvanizing 16GA square post w/ 4” baseplate
Heavy duty 3" X 3" 11GA square post
30-6024
30-6020
74-P6FLANG2X2
74-P83X3-11 ^ 96” _ 3”
^ 24”
^ 20”
^ 72” _ 2”
Forged Steel Cane Bolt
Lokk Bolt w/ Stainless Steel Rod
4" X 4" 11GA square post 1/4” thick
3" X 3" 14GA square post
74-P124X4-250 ^ 144” _ 4”
74-P113X3-14 ^ 132” _ 3”
13-07016-301
^ 18” / 24” 21-LB1BX
^ 27-9/16”
HINGES
Cast Iron Post Cap (Pyramid) Fits over 3” Square POST CAPS
Standard Barrel Hinge
Steel Butt Hinge
Cast Iron Post Cap (Truncated Pyramid) Fits over 3” square
45-3002-3 ^ 4-1/4” _ 3-11/16”
45-460-3 _ 3-7/16”
44-2003-E
^ 1-5/8” 1-4040
^ 5”
Cast Iron Post Cap (acorn) Fits over 3" square
Cast Iron Post Cap (Bullet) Fits over 2" square
Steel Weld-On Hinge
Steel J-Bolt Adjustable Barrel Hinge
45-9352 ^ 5” _ 2-3/4”
45-3003-3 ^ 1-1/2” _ 2-1/2”
42-FSPGF-200
44-2005-ADJ
^ 7-3/4”
^ 6-3/4”
LATCHES
2” Black Plain End Pipe SCHEDULE 40 PIPES
Heavy Duty Gravity Gate Latch w/o Screw Hole
Heavy Duty 1/2"Slide Bolt Latch No screws
3” Black Plain End Pipe
1-100 ^ 3” _ 5-1/2”
30-21
69-2X40-21BPE
69-3X40-21BPE
^ 1-3/4” _ 4-1/4”
^ 21' _ 2”
^ 21' _ 3”
Lokk Latch Deluxe & External Access Kit
Magnetic Safety Latch, Side Pull
6” Black Plain End Pipe
4” Black Plain End Pipe
21-MLSPBX ^ 1-1/2” _ 2-1/2”
69-4X40-21BPE ^ 21’ _ 4”
69-6X40-21BPE ^ 21’ _ 6”
21-LOKK-DELUXE ^ 4-7/8” _ 1-1/2”
3
MAGNETIC LATCH 21-MLTPBG
POOL GATE OPTIONS
A black magnetic safety lock to keep kids safely out of dangerous
places. This latch can be adjusted
vertically and horizontally to get just the right fit for your application. There's a 1/2" to 1-7/16"
POST CAP
45-657-L
PIPE
gap variance. This latch is by D&D Technologies. This latch is optimal for pools and child safety.
69-4X40-21BPE This pipe is a standard 4" x 4"
cylinder that can be cut to
size as needed. They range in widths from 2" to 6" wide. Each is galvanized in a protective layer of zinc to prevent rusting. These may require a flange in order to be anchored to a substrate.
This post cap is a large pineapple to show
welcome. The pineapple is made of cast iron. There is a solid 4" solid round base that can be welded onto a pipe. Each post cap is 4" diameter, 8-1/2" high and weighs a hefty 18.04 lbs. There are also plenty of options for smaller diameter pipes, or square posts.
HINGES 21-TCHD1
PIPE FLANGE
46-17004-NH
TruClose
This pipe flange fits over 4" standard pipe or round tubing. The
heavy duty hinge. For pool and safety gates,
flange is not threaded and does not have
there is an optional safety cap. This hinge is quick and easy to install and to adjust for
pre-drilled screw holes. There's a clean mill finish on the flange and it's lightly oiled before shipping. Enjoy a quantity discount when
self-closing speed. These polymer hinges were devised to overcome all the problems associated with conventional gate hinges – rust, binding, sagging and staining. Self close maximum gate weight is 154 lbs.
you order 100 or more.
4
POST
74-P6FLANG2X2
POST CAP
45-807
This post is a standard 2" x 2" square that can be cut to size as needed. The post also comes pre-welded to a 4" base plate for anchoring the post to most substrates. They range in widths from 2" to 4" wide. Each is powder coated and galvanized in a protective layer of zinc to prevent rusting.
This cast iron
post cap has a stylish pyramid design. It’s made to fit over a square 2" x 2" post. There are also
similar options for 3" and 4" posts.
Each of these caps is 1-1/8" high and weighs .414 lbs. Achieve a quantity discount when you purchase 48 and more or 96 and more. Items ship same day.
21-LOKK-DELUXE GATE LATCH
A deluxe Lokk latch with external
TRU-CLOSE HINGE 21-TCA1-L2 A Tru-Close adjustable
access kit. This latch works for metal, wood or vinyl. The latch is made by D&D Technologies. This latch is keyed and you can ask about having multiple gates keyed alike. Comes in black, but you may special order in white. Latch works from both sides. Gain a quantity discount when you buy 6 or more.
hinge by D&D Technologies has 2 legs that are 2-1/2"
x 3-3/4", 1-5/16" leg length. The gap between gate and fence is a fixed 3/4". Self Close Maximum Gate Weight is 66 lbs. Enjoy a quantity discount when you buy 10 or more.
5
DALLAS LOS ANGELES BALTIMORE
GUIDE ROLLERS
WHEELS
6" Rubber Guide Roller
3" Rubber Guide Roller
Cast Iron V-Groove Pulley Wheel in Box
Heavy Duty Gate Spring Roller 16"
30-400-WBX
30-500
30-410-6 ^ 6” _ 2-3/8”
30-410-3 ^ 3” _ 2-3/8”
Wheel ~ 4” x 1-1/2”
^ 16” _ 3” \ 2.5 lbs
Box ^ 3” x _ 2” \ 5.06 lbs
Non-Marring Guide Roller 5-7/8"
12" Rubber Guide Roller
Heavy Duty Double WheelCarrier w/ 10" Pneumatic Wheels
Cast Iron V-groove Pulley Wheel
33-3232
Wheel ~ 10” _ 12” between wheels \ 14 lbs
39-EG104 ^ 5-7/8” _ 2-3/8”
30-410-12 ^ 12” _ 2-3/8”
30-400-4
Wheel ~ 4” x 1-1/2”
SELF CLOSING HINGES
Cast Iron Post Cap Ball Fits over 2-1/2" Pipe POST CAPS
Steel Spring Hinge
Lockey Hydraulic Gate & Door Closer
Cast Iron Pineapple Solid Fits over 4" Solid Round Base
45-334-212 ^ 4-3/8” _ 3-1/4” Ball ~ 1-1/16”
^ 8-1/2” _ 4” ~ 4” 45-657-L
31-4310
^ 4” _ 4”
30-64-T
Cast Iron Post Cap Ball Fits over 4" Pipe
Cast Iron Corinthian Post Cap
Tru-Close Heavy Duty Hinge
Tru-Close Adjustable Hinge
45-997
45-334-4
^ 2-7/8” _ 3-3/16” Inside ~ 2-1/2”
^ 5-3/8” _ 5” Ball ~ 2-3/16”
^ 3-7/8” _ 3-3/4” 21-TCA2
^ 5-1/4” _ 4-3/4” 21-TCHD1
LATCHES
Cast Iron Door / Gate Pull HANDLES
Magnetic vertical pull Safety Latch
Magnetic top pull Safety Latch
Forged Steel Door/Gate Pull
45-1959
13-02000-356
^ 5-3/4” _ 1-15/16”
^ 9-7/16” _ 3-1/8”
21-MLTPBG
21-MLVPBG ^ 10-1/4”
^ 20-1/2”
Unican 1000 Lockset
Hookbolt Lock & Box Set Satin Chrome Double Cylinder
Forged Steel Door Handle,Twist
Forged Square Door Handle
13-02000-396 ^ 15 3/4” _ 4 5/16”
13-02000-392 ^ 15-3/4” _ 4-15/16”
1-350 ^ 7” _ 2”
22-1011-26D _ 2-3/4”
6
HOOK BOLT LATCH 22-LK50-SBL
SLIDE GATE OPTIONS
Keeper is not included, it must be purchased separately. Keeper part number is 22-SAKLQFBL.
POST CAP 45-9352
This cast iron post cap has a bullet style design. It’s made to fit over a square 2" x 2" post. There are also similar options for 3" and 4" posts. It is 1-1/8" high, and weighs
HANDLE 45-1959
Cast iron handle that is easy to install. The handle is 5-3/4" high by 1-15/16" wide.This handle can be bolted or welded to any type of gate.
.414 lbs.
WHEEL IN BOX 30-400-WBX
A pair of wheels are capable of bearing up to 500 lbs. It is designed to slot perfectly onto a v-track. The wheel box is powder coated to prevent rust.
V-TRACK 39-VTRACK-19
This galvanized v-track is essential to the function of a sliding gate. This 19' v-track can be cut to size to fit any sliding gate. There are 1/2" staggered bolt holes every foot on both sides to anchor the track to most substrates.
GUIDE ROLLER 30-410-6
This six inch rubber guide roller is made for side rolling gates. It comes with a C bracket for use in installation. They range in height from 3" 6" and 12". This part is best installed in sets of two. 7
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8Made with FlippingBook - Online Brochure Maker