Transmission Mounting Kits
ES-2167
ES-2168
A— Turbo 350, Powerglide, Standard (20 5/8" engine-to-transmission mount holes.) B— Turbo 400 only. C— 700R4 Overdrive; use with I.F.S. only. This kit for experienced builders only.
A A B B
ES-2167 ES-2168 ES-2169 ES-2166
$135.00 kit $200.00 kit $135.00 kit $200.00 kit $460.00 kit
1937-40 Turbo 350
1937-40 Turbo 350, with Wishbone kit
1937-40 Turbo 400
1937-40 Turbo 400, with Wishbone kit
C ES-2167OD 1937-40 700R4 Overdrive, I.F.S. only
GENERAL INFORMATION
Engine and transmission mounting is simple with this kit, but some effort is required to remove the center section from the Cross-member. Access and tough rivets are the problem here. The center kit is a key to this swap and we recommend installing it first. The front wishbone must be split or removed (when using I.F.S.). No firewall modification (unless using other than points distributor). No cutting of the X-rails
required, but inner lip will need to be bent down slightly for clearance around automatics. GM steering is just right for this application. We do not recommend Vega steering boxes for 1935 & later cars. Wishbone must be split to clear automatics. Kits can be installed with body on. Due to extensive modification to install a 700R4, experience is recommended.
1935-40 CROSS-MEMBER SUPPORT
This pre-welded assembly bolts onto the stock Cross-member. Tubular design. Just drill holes and mount, or weld-in. PJ-5008 $65.00
212
800-221-3673
Made with FlippingBook - Online magazine maker