Rubber Seal Glass
WINDOW SEAL - ROPE-IN TOOL, 1/4" GREEN CORD Use the rope in tool when working with rubber gasket to set glass. The unique counter-grip plastic handle injects the rope through its stem as it is pulled around the gasket. There is plenty of durable rope to fit around even the largest truck windows. This device is a must when installing a rubber gasket. PRP-0001 $12.00 each
Body/Window Frame
MULTI-TOOL This cool tool should be in everyone’s box. The neat little ball shaped end lifts the flap of the seal up and over the body flange without tearing like a screw driver would do. Do the job in a lot less time with the proper tool. Also good for burnishing or applying pressure to hard to reach places. TL-1002 $15.00 each
DOOR PANEL CLIP REMOVER Quick easy way to remove door panel clips without causing damage to the trim pad. Insert the tool under the trim pad or upholstery and rock the clip out. PRP-0017 $12.00 each
WINDSHIELD WIPER ARM REMOVER Makes wiper arm removal and replacement an easy job without damaging the vehicle finish. Simply place the "hook" under the arm base, lift and squeeze the wiper arm and tool handle together. The wiper arm lifts right off. Reverse the procedure to install a wiper arm. Overall length: 67/8". AU-20907 $10.00 each
WINDOW & DOOR CLIP REMOVER TOOL Window and door clip remover and installer. For removing the C-type clip that hold the cranks and window handles in place. PRP-0749 $9.00 each
HINGE PIN• PULLER KIT
This very handy tool set is made of forged steel with a heat treated bolt. Remove pins without damage to hinge or paint. Hardened steel extensions included. TL-100 $28.00 kit
RETAINER CLIP REMOVAL TOOL An invaluable tool, it is used for removing the door/window handle retaining clip that is extremely hard to get to on the early-style handles. Will work on other applications that use a handle retaining clip also. UP-64764 $6.50 each
DOOR HINGE PIN PULLER EXTENSIONS Set includes 4 hardened steel extensions, one each in the following lengths; 1", 1 1/2", 2", 2 1/2" TL-100-P $5.00 set
MOLDING RELEASE TOOL Beveled for easy entry under molding. Made from tempered high-carbon steel, this handy tool is used to remove trim moldings from around bonded windshields and rear windows. Tool works in either direction, so there is no need to turn it end for end or change tools. Removes moldings in a fraction of the time required with any other tool. Lays flat on glass; will not twist in lifting clips as narrower tools do. PRP-0063 $9.00 each
www.bobdrake.com
357
Made with FlippingBook - Online magazine maker