Bluetooth
Dust Extractor Bluetooth Accessories
Remote Control CT-F I/M-Set Bluetooth remote control for CT 26, 36, 48
Module for installation in the module slot (to be carried out by a qualified electrician) Remote operation via remote control (included in the set) or via cordless tool (in combination with Bluetooth battery pack) Enables the CT Dust Extractor to be started automatically when the cordless tool is switched on (compatible Bluetooth battery pack required) The remote control makes it possible to switch on the CT Dust Extractor directly from the suction hose (simple changeover to cleaning mode, even when the CT Dust Extractor is in AUTO mode)
1
202097
Retrofit set for CT 26, 36, 48
CT-F I extractor remote control including: reception module (for CT 26, 36, 48)
Remote Control CT-F I
Suitable for all dust extractors with Bluetooth (in combination with Bluetooth reception module) The remote control makes it possible to switch on the CT Dust Extractor directly from the suction hose (simple changeover to cleaning mode, even when the CT Dust Extractor is in AUTO mode) including: two fastening straps for D27 and D36 suction hoses
2
202098
• Set the switch on the CT Dust Extractor to AUTO. • Press the green pair button on the CT Dust Extractor for 3 seconds until a rotating blue light appears. (This will be in pairing mode for 60 seconds.) • Briefly press the large button (MAN) on the top of the remote control once and it will then be paired to the CT Dust Extractor. Remote Control pairing
Disconnect the battery pack from the CT Dust Extractor:
• Set the switch on the CT Dust Extractor from AUTO to 0. • Simultaneously press both green buttons on the remote control for approx. 10 seconds until a magenta light on the remote control lights up.
35
Made with FlippingBook - Online catalogs