Quarterturn
Ashlar
Brick
Finish by installing the perimeter cuts (Image 4):
Prior to installation Check each tile for visual defects prior to installing or cutting. Otherwise notify WISE before proceeding with installation. Adhensive-PU sealer application The tiles do not require the use of a permanent bond adhesive. The Wise tiles should be installed with a peel up adhesive. The adhesive should be perfectly dried (transparent color) before fitting otherwise permanent adhesion may occur. Application of PU sealer (Dr. Schutz recommended) is obligatory for the proper maintenance of the product and product’s guarantee. Installation fitting method Start with one tile in a doorway on the parting of the rooms. Draw a line parallel to the wall starting from this tile. Draw a second line at a distance of a few tiles, at right angles to the first line. (Image 1) Apply the peel up adhesive, leave it to dry completely and start again from the doorway. (Image 2) Install the next tile firmly in the corner formed by the previously fitted tile. (Image 3)
– Put the border tile to be cut (2) on the tile which is fitted last (1) – Push a tile against the wall (3) – Cut the border tile (2) along tile (3) – Install the border tile (2) cut to measure
Additional fitting instructions
Attention: Some visible white glass fibers may be apparent at the sides of each tile at the seams. We advise to brush or rub away these fibers with a damp cloth before installation.
GENERAL TIPS
– If castor chairs are used, it is recommended to use hard castors in polyamide. – Rubber materials (e.g. car tires) can affect the colour of WISE in case of long term contract. It is therefore advisable to provide special protection in case of frequent contact with rubber materials. – We don’t advise the use of WISE tiles for outdoor applications.
– WISE is suitable for floor heating.
– Once the installation has been completed the surface should be protected particularly if the area is to be used by other trades during final finishing. For any questions in that respect our Technical Services Department will be pleased to assist you.
73
Made with FlippingBook interactive PDF creator