Page 3 / 3 Certificate number: 44623/B0 MED
3.6 - Cloud 9 Flame Retardant 8
- Test report N° 386343 Issue 1 dated 01/09/2017, as per IMO 2010 FTP Code Annex 1 Part 5. - Test report N° 385144 dated 03/08/2017, as per IMO 2010 FTP Code Annex 1 Part 2.
3.7 - Cloud 9 Flame Retardant 4
- Test report N° 391958 Issue 1 dated 14/12/2017, as per IMO 2010 FTP Code Annex 1 Part 5. - Test report N° 385142 Issue 1 dated 03/08/2017, as per IMO 2010 FTP Code Annex 1 Part 2.
4. APPLICATION / LIMITATION: 4.1 - Cast Iron FR / Contract 6 mm FR / Cruise Liner FR and Cast Iron 8 mm FR / Contract 8 FR / Cruise Liner 8 FR : These products are to be used as floor coverings or primary deck coverings only. 4.2 - Cloud 9 Flame Retardant 6, Cloud 9 Flame Retardant 8 and Cloud 9 Flame Retardant 4 : These products are to be used as floor coverings only (not suitable as primary deck coverings). 4.3 - The fitting aboard to be the same as used for the test. 4.4 - The products may be applied over any low flame-spread floor covering, steel or non-combustible material. 5. PRODUCTION SURVEY REQUIREMENTS: This certificate alone does not allow the applicant to issue the Declaration of Conformity and to affix the mark of conformity (wheelmark) to the products corresponding to this type. To this end, the production-control phase module D Production Quality Assurance or module E Product Quality Assurance or module F Product Verification of Annex II of the Directive is to be complied with and controlled by a written inspection agreement with a Notified Body. In particular Article 10.3 specifies that the wheelmark shall be followed by the identification number of the Notified Body involved in the production control phase (module D, E or F) and by the year in which the mark is affixed (4 digits or last 2 digits). 6.2 - In pursuance of the EU/US MRA+, and in accordance with the Council Decision 2004/425/EC of 21 April 2004 amended by Decision 1/2018 of 18 February 2019, the product(s) marked as per MED 2014/90/EU may be marked with the USCG conformity marking as authorized by the Notified Body undertaking surveillance module. 7.OTHERS: 7.1 - It is BALL & YOUNG LTD. 's responsibility to inform shipbuilders or their sub-contractors of the proper methods of fitting, use and general maintenance of the approved equipment and the conditions of this approval. 7.2 - This Certificate supersedes EC Type Examination Certificate N° 44623/A2 MED issued on 30/01/2018 by the Society. 6. MARKING OF PRODUCT: 6.1 - Reference is made to MED 2014/90/EU chapter 2.
*** END OF CERTIFICATE ***
The electronic version is available at: http://www.veristarpm.com/veristarnb/jsp/viewPublicPdfTypec.jsp?id=feygczgt37 BV Mod. Ad.E 536 June 2017
This certificate consists of 3 page(s)
Made with FlippingBook interactive PDF creator