ART. 50329475
ART. 50329525
ART. 50329530
3D-TESTER ANALOG, TSCHORN It features a sleek and attractive design. Its preci- sion and versatility allow quick and easy determi- nation of workpiece zero points and lengths. The probing can be performed in all axis directions (X, Y, Z) with identical resolution. As soon as the poin- ter shows “0“, the spindle axis stands precisely on the workpiece edge. The protection of the measuring unit is of topmost priority. For this purpose, large travel paths, limited by mechanical stops, have been integrated into the probing unit. The probing unit tip has a breaking point that is mounted near the top. If your 3D probes are damaged by the effect of an external force, a simple repair is economically possible.
ART. 50329535 Flad spids ART. 50329535 Turning tip
ART. 50329545
ART. 50329540
Resolution: 0,01 mm. Waterproof IP67, except ART. 50329475.
Stainless steel
Not magnetic
Carbide tip
Item no. 50329475 50329525 50329530 50329535
Shaft diameter
Total length without tip
Tip
Display diameter
Ø12 mm Ø12 mm Ø12 mm Ø20 mm
135 mm 130 mm 150 mm 150 mm
Ø3 mm Ø3 mm Ø3 mm
35 mm 37 mm 49 mm 37 mm
Ø3,2 / 3,6 mm
Accessories
50329540 50329545
Probe tip standard Ø3 mm. Length: 27 mm Probe tip long Ø6 mm. Length: 62 mm
UNIVERSAL 3D-SENSOR WITH WELDON SHANK The universal 3D-sensor from Haimer is a very precise and versatile measu- ring instrument for milling and EDM machines (insulated probe). It gives you the opportunity to find the exact positioning of the spindle axis on the edges of the workpiece.
The 3D-sensor can be used in any direction (X-, Y-, Z- axis).
ART. 50329785
ART. 50329780
Item no. 50329750 50329780 50329785
Total length (L1 + L2)
Shaft length (L2)
Shaft (ØD1)
Ptobe tip diameter D2
Width (B)
Accuracy 0,01 mm
163 mm
50 mm
20 mm
4 mm
65 mm
Probe tip for Haimer 3D-sensor / Ø4 mm Probe tip for Haimer 3D-sensor / Ø8 mm
110
Made with FlippingBook Ebook Creator