SEE MORE INFORMATION ABOUT THESE PRODUCTS ON OUR WEBSITE WWW.DIESELLA.DK
PERMANENT MAGNET CHUCK FOR MILLING Clamping for heavy machining operation.
Features: • Pole pitch 4 mm brass + 11 mm steel. • Highest clamping force up to 180N/cm².
• Low magnetic field concentrated over the top plate without stray fields and no magnetization of the tool. • Coolant and water proof structure. • Very light switching force. • High precision and low remaining magnetism.
* On stock.
Vare nr. Item no. 30350 40 30342250 30350255 30350270 3034 310
Størrelse Size
Item no. 30342320 30342330 30342340 30342350 30342360
Size
Item no. 30342410 30342425 30342430
Size
Item no. 30350210 30342150 30350225 30342210 30342220
Size
* *
30342125 30342150 30342200 30342210 30342220
150 x 250 mm 150 x 300 mm 2 0 x 450 m 150 x 350 mm 150 x 450 mm 2 0 x 6 0 m 200 x 300 mm 250 x 3 0 m 2 0 x 4 0 m 2 0 x 0 m
250 x 350 mm 250 x 400 mm 250 x 450 mm 300 x 300 mm 300 x 400 mm
300 x 500 mm 300 x 600 mm 400 x 400 mm
150 x 250 mm 150 x 300 mm 150 x 350 mm 150 x 450 mm 200 x 300 mm
* * *
PERMANENT MAGNETIC CHUCK For clamping of small and thin workpiece.
Features: • PMF with pole pitch 0.5 brass + 1.5 mm steel. (pitch 1+3 mm also possible) • Highest uniform clamping force up to 120N/cm². • Coolant and water proof structure. • Very light switching force. • High precision and low remaining magnetism.
* On stock.
Item no. 30315125 30315175 30315200 30315225 30315250 30315255 30315275 30315300
Size
Item no. 30349105 30315350 30391120 30315425 30315450 30315460 30315475 30315485
Size
Item no. 30315500 30315525 30315530 30315540 30315545 30349135 30315550 30315560
Size
Item no. 30315565 30315570 30315575 30349150 30315610 30315620
Size
70 x 130 mm 100 x 175 mm 100 x 250 mm 130 x 250 mm 130 x 400 mm 140 x 260 mm 150 x 150 mm 150 x 250 mm
150 x 300 mm 150 x 350 mm 150 x 400 mm 150 x 450 mm 200 x 300 mm 200 x 350 mm 200 x 400 mm 200 x 450 mm
200 x 500 mm 200 x 600 mm 200 x 630 mm 250 x 350 mm 250 x 400 mm 250 x 450 mm 250 x 500 mm 250 x 630 mm
300 x 300 mm 300 x 400 mm 300 x 500 mm 300 x 600 mm 300 x 630 mm 400 x 600 mm
* *
*
*
PRECISION SINE TABLE Clamping for grinding, EDM and measuring angle accuracy.
Features: • Pole pitch 0,5 + 1,5 mm (brass/steel). • Highest clamping force up to 120N/cm². • Single piece, hardend (HRC60), precision ground base offering extreme rigidity. • Stable locking of chuck with slotted link on the side. • Maximum angular accuracy +/- 0,5” • Parallellism: +/- 0,002mm/100mm. Angle range: 0-45 degree.
* On stock.
Item no. 30320140 30355600 30320225 30355610
Size
Item no. 30320255 30320300 30355620 30320400
Size
70 x 130 mm 100 x 175 mm 130 x 250 mm 150 x 150 mm
150 x 250 mm 150 x 300 mm 150 x 350 mm 150 x 400 mm
Item no. 30355630 30355640
Size
* *
150 x 450 mm 200 x 500 mm
* *
*
142
Made with FlippingBook Ebook Creator