CIRCUMFERENCE RULER For measuring the circumference and diameter at the same time with 1/10 mm vernier. 13 x 0,2 mm wide steel tape with etched mm graduation and reader with vernier. Reading of circumference on the lower scale, diameter on the upper scale. Also known as periphery tapes.
WORKSHOP STEEL RULER (FORM A) DIN 866/Form A. Made of tool steel with engraved milimeter scale. Left and right side are with protective ends (= First and last 10 mm is without milime- ter scale). Can also be used as a ruler. Certificate: No (not incl.)
Permitted measure dev.
Permitted straightness dev. Weight
Item no. 10312110 10312160 10312225 10312270 10312315 10312350 10312475
Circumference 60 - 950 mm 60 - 2200 mm 60 - 3780 mm 60 - 4720 mm 60 - 5980 mm 60 - 7540 mm 60 - 11310 mm
Diameter
Item no.
Dimension
20 - 300 mm 20 - 700 mm 20 - 1200 mm 20 - 1500 mm 20 - 1900 mm 20 - 2400 mm 20 - 3600 mm
10431100 500 x 30 x 6 mm 30 µm 10431110 1000 x 40 x 8 mm 35 µm 10431120 1500 x 40 x 8 mm 50 µm
35 µm 47 µm 85 µm
0,7 kg 2,5 kg 3,7 kg
10431130 200 x 50 x 10 mm
60 µm
110 µm 7,9 kg 160 µm 11,9 kg 210 µm 23,0 kg
10431140 3000 x 50 x 10 mm 80 µm 10431150 4000 x 60 x 12 mm 100 µm
TANK DIPPING TAPE With black/red marking. Buy plump bob separately. 2 versions, white painted steel and stainless steel. Other lengths on request.
WORKSHOP STEEL RULER (FORM B) DIN 866/Form B. Made of tool steel with engraved milimeter scale. Left side starts at 0, right side is with protective end (= First and last 10 mm is without milimeter scale). Can also be used as a ruler. Certificate: No (not incl.)
Item no.
Length Width Thickness Accessories (tape)
Tape Steel Steel Steel
10312710 10 m 13,0 mm 0,2 mm 10312720 20 m 13,0 mm 0,2 mm 10312730 30 m 13,0 mm 0,2 mm 10312750 10 m 13,0 mm 0,2 mm 10312760 20 m 13,0 mm 0,2 mm 10312770 30 m 13,0 mm 0,2 mm
10312810 10312820 10312830 10312850 10312860 10312870
Permitted measure dev.
Permitted straightness dev. Weight
Item no.
Dimension
10431300 500 x 25 x 5 mm 75 µm 10431320 1000 x 30 x 6 mm 87 µm 10431330 1500 x 30 x 6 mm 125 µm 10431340 2000 x 40 x 8 mm 150 µm 10431360 3000 x 40 x 8 mm 200 µm 10431370 4000 x 50 x 10 mm 250 µm
70 µm 85 µm
0,5 kg 1,1 kg
Stainless Stainless Stainless
175 µm 2,1 kg 220 µm 5,0 kg 320 µm 7,5 kg 420 µm 15,8 kg
DIP WEIGHTS FOR TANK DIPPING
Item no. 10312600
Length 156 mm
Weight
Material
675 g
Brass
PRECISION STEEL EDGE DIN874, sheet 1. Without division and precisiongrinded. Without ID-no.
Item no. 10431550 10431610 10432250 10432280 10432310 10432315 10432340 10432370 10432375
Acurracy
Dimension
2 2 2 2 2 2 2 2 2
500 x 40 8 mm
1000 x 50 x 10 mm 500 x 30 x 6 mm 1000 x 40 x 8 mm 1500 x 50 x 10 mm 2000 x 40 x 10 mm 2000 x 60 x 12 mm 3000 x 80 x 15 mm 3000 x 80 x 15 mm
MEASURING TAPE W/ AUTO-LOCK Impact absorbing rubber jacket for case and tip protection. EC class II.
Item no. 10313030
Length
Width 13 mm
3 m
30
Made with FlippingBook Ebook Creator