SHORE A: 15250125
SHORE D: 15251220
UTRASONIC THICKNESS GAUGE Handheld ultrasonic thickness gauge with metal case and test range from 0,9 ~ 400 mm. Used for measuring thickness and corrosion of pressure vessels, chemical equipment, boilers, oil storage tanks, and more. Applicable to mea- sure the thickness of many materials, (steel, cast iron, aluminum, red copper, brass, zinc, etc.) Uses 4 x AAA batteries, measuring 108 x 61 x 25 mm. Weight: 230 g. incl. batteries.
HARDNESS TESTER, SHORE A+D Shore A = hardness tester for soft materials; rubber, soft plastic materials, leather etc. A spring loaded measurement tip is held against the material and the hardness is stated in Shore A. Shore D = hardness tester for hard materials; hard rubber and plastics etc. A spring loaded measurement tip is held against the material and the hardness is stated in Shore D. Calibration can be done with the enclosed test block. The instrument has a mean value function for 2 to 9 measurements. Automatic shutoff after 1 minute. Standards: DIN53505, ASTMD2240, ISO7619, JISK7215. 4 x 1,5V AAA (UM-4) batteries.
Sound velocity 1000 - 9000 m/s
Item no.
Display Range
Accuracy
Resolution
0.1 mm / 0,01 mm / 0,001 inch
15080190 48 x 28 (LCD) 1 - 400 mm ±(0.5%n + 0,1)
Meas. deviation
Meas. range
Reso- lution
Working temp.
Dimension mm
Weight ex. probe
Item no.
15250125 < 1% H 0 - 100 HA 0,1 0ºC - 40ºC 162 x 65 x 38 173 g 15251220 < 1% H 0 - 100 HD 0,1 0ºC - 40ºC 162 x 65 x 38 173 g
Standard accessories: Main unit Standard 5MHZ transducer (ART. 15083235) Built-in calibration block 4mm Couplant 4 oz Two AAA batteries Operation manual and carrying case Software + cable
ART. 15251235
ULTRASONIC THICKNESS GAUGE Compact, hand-held general-purpose Ultrasonic Thickness gauge for ac- curate, error-checked, through-coating measurements using Multiple Echo technology. You can now test painted tanks, pipes, etc., without needing to remove the paint or make corrections for the paint thickness. The instrument can measure with very high resolution (0.01 mm or 0.001 inches) the thickness of metal- lic and non-metallic materials such as steel, aluminum, titanium, plastics, ceramics, glass and any other good ultrasonic wave conductor. Menu-driven operation and “Echo-Echo” mode allow easy thickness gauging through coatings up to 25 mm. The 15082650 also features a scan-mode which measure thickness value at 10 meas. per second and simultaneously displays actual thickness. It accurately displays readings in either inches or mm. and is equipped with special features like automatic recognition of probes with dif- ferent frequencies, automatic zeroing of the unit and limited setting and alarm.
ART. 15250150
SHORE A TEST BLOCKS Test blocks for comparison and control of hardness for soft or hard, non- metallic materials.
Item no. 15250150 15251235
Hardness value
Test blocks
For
A36 - A94 D32 - D92
7 3
Shore A Shore B
Measuring mode
Item no.
Range Memory Data output
Resolution
WEBSTER HARDNESS TESTER Lightweight, mobile solution for “on-site” hardness tests on aluminum alloys, brass, copper and mild steel. Internal dia.: > 10,0 mm.
0,65 - 400 mm (afhængig af opgave)
500 målinger
USB til PC TE + E-E + Scan
0.01 (<99.99 ) 0.1 (>100 )
15082650
Test range
Hardness area
Item no.
Accuracy
Subject thickness
Working temp.
Dimension display
Item no.
Dimension
Weight
15252450 0 ~ 20 HW 0,5 HW 25 ~ 110 HRE 58 ~ 131 HV
0,4 - 6,0 mm
15082650 -20ºC - +50ºC 128 x 64 mm 115 x 64 x 27 mm 220 g
59
w w w . d i e s e l l a . d k
Made with FlippingBook Ebook Creator