Dillon Reloading Accessories
“D-TERMINATOR” Electronic Scale
O ur Primer Flip Tray is a heavy, high-quality tray large enough for the Federal primer package. 13606, $35.00 each Primer Pick-Up Tubes are used to transfer primers from flip tray to priming system.
A Strong Mount increases your machine’s “footprint” to over 10”, spreading the load over the whole bench instead of stressing the leading edge. For XL750/650 owners with limited overhead clearance, the XL750/650 Short Strong Mount raises the machine 6” above the bench top. All
• 1500 grain/100 gram capacity • Accurate to 0.1 grain/0.01 gram • Uses four AA batteries (included) • Comes with its own AC adapter • 100g scale check weight included
Having extras pre-loaded with primers makes it easy to load a pre-determined amount of ammo without having to stop to pick up primers. 1 Large 22029 $12.00 1 Small 22028 12.00 2 Small, 2 Large 20056 45.00 4 Large 20050 45.00 4 Small 20049 45.00
mounts come with all the fasteners necessary to mount your machine and are coated with a durable black wrinkle finish. RL550 Strong Mount ( Pictured ) 22051 $99.00 XL750/650 Tall Strong Mount 22050 99.00 XL750/650 Short Strong Mount 22052 99.00 Square Deal “B” Strong Mount 22223 110.00
T hese plates bolt directly to your bench top, and are drilled and tapped to allow mounting your reloading machine directly to the top of the mounting plate. Stock #62005, $99.00 is for: XL750, XL650, RL550 and Square Deal “B”. Stock #62006, $99.00 is for:
C olor Coded Aluminum Toolheads for the RL550 and XL750/650 make it easy to tell at a glance which caliber you’re set up to load. Gold RL550 62134 $50.00 Blue RL550 62132 50.00 Black RL550 62133 50.00 Gold XL750/650 62138 55.00 Blue XL750/650 62136 55.00 Black XL750/650 62137 55.00
D illon’s “Belted Magnum” Powder System features a maximum-capacity steel powder bar that can dispense more than 100 grains of extruded IMR powder. Magnum rifle cartridges can require from 70 grains to well in excess of 100 grains for a single charge. We tested this system with various extruded rifle powders and found that powder charge variations stayed within plus-or-minus three-tenths of a grain. 97126 $225.00
NOTE: Dillon electronic scales are covered by a one-year warranty from date of purchase.
$149.99 10483
RL1100, CP2000, Super 1050 and RL1050 as well as any Dillon reloading machine that is mounted on the Dillon Strong Mount .
O ur Bullet Tray is a simple, shallow aluminum tray designed and located for economy of motion. Our new kit for the SDB, RL550 and 750/650 can be used with or without our Strong Mount.
T he Square Deal “B” Toolhead Stand holds your SDB toolhead, powder measure, dies and caliber conversion components ( not included ) in an orderly manner. 62225, $50.00
RF100 Automatic Primer Filler
T he Powdercheck System (available for XL750/650 and Super 1050 reloading machines) sounds an alarm if the powder charge in a round is out of limits either high or low. 21044, $99.00 each
22312 $74.00
SDB Bullet Tray Kit 550 Bullet Tray Kit
22311
74.00 74.00 69.00
750/650 Bullet Tray Kit 22310
O ur Toolhead Stands for the RL550 and XL750/650 are the ultimate in convenience for keeping your reloading bench clean and uncluttered. 22055, $35.00 each
22215
1100/1050 Tray Kit
T he Low Powder Sensor provides an audible and visual reminder when it’s time to refill your powder reservoir. When the powder level drops to about 1,000 grains remaining in the reservoir, a buzzer will sound and a bright red LED will light. Designed to fit all Dillon powder measures. Made of clear polycarbonate, it simply replaces the die-cast metal lid supplied with the measure, and operates on two AAA batteries (included). 16306 $59.00
T he RF100 Automatic Primer Filler ^ eliminates the task of filling primer pick up tubes. Now you simply pour your primers from their box into the top, press the blue button and watch it run! In about two minutes the primers are inside the protective metal housing. Large Primer Filler 97077 $374.00 Small Primer Filler 97111 374.00 Large (Euro. 220v) 97112 424.00 Small (Euro. 220v) 97113 424.00 Small Conversion 17903 99.00 Large Conversion 17902 99.00 Nylon Dust Cover ^ 11143 14.99
A n Aluminum Roller Handle gives your reloader an entirely new “feel,” reduces operator fatigue, and makes primer seating easier.
D illon’s 1050 Toolhead Stand is now available to store caliber quick changes for the 1050. 62200, $65.00
17950 $65.00
D illon’s 1” Bench Wrench fits our 1” Die Lock Rings which give you more space on the toolhead. 10842, $17.00 each
E quipment Dust Covers are made of tough packcloth nylon and add security to your loading bench. Your reloader will be protected against more than dust as the machine covers come with a D-ring that allows the heavy duty zipper to be locked.
O ur Toolholders are available for your reloading machine and ensure that the tools you need to service your reloader are handy and organized. No more digging around your bench trying to find the right size hex wrench!
O ur Machine Maintenance Kits
come with everything you need to keep your Dillon loader cleaned and lubricated up to factory specifications. Available alone or in combination with a spare parts kit for your machine.
11555 11541 19441 62202 62203 10842 19970
$50.00 50.00 45.00
XL650 with Wrench Set
RL550/XL750 with Wrench Set
13795 10443 13239 13083
$29.99 39.99 49.99
SDB/550 Cover XL750/650 Cover
SDB with Wrench Set
22211 97015 97016 97500 97018
$40.00 65.00 65.00 75.00 84.00
Maintenance Kit Only w/SDB Spare Parts Kit w/550 Spare Parts Kit w/750 Spare Parts Kit
Note: Super 1050 Toolholders include Wrench Set
1050 Cover Master lock
55.00 50.00 17.00 17.00
1050 with bracket 1050 w/o bracket
6.99 Pictured: SDB/550/650/750 Quick-Change Cover (for use with powder measure) 11143 $14.99
One-Inch Bench Wrench
w/1050 Spare Parts Kit
SDB-Only Wrench
19
18
Made with FlippingBook Digital Publishing Software