SyncroFlo Fire Protection_lr

FIRE PROTECTION COMMERCIAL, INDUSTRIAL, POWER

PROVEN EXPERIENCE With over 30 years of experience manufacturing pumping systems for fire protection, SyncroFlo has a proven track record of protecting life and property globally. SyncroFlo packaged fire protection systems provide owners, engineers and operators a complete third party labeled system. This is provided at an accurate predetermined cost, while avoiding the pitfalls of site built systems. With a SyncroFlo pre-engineered packaged system, all headaches are avoided by total coordination between the engineer, owner and SyncroFlo (the manufacturer). PACKAGED FIRE PROTECTION PUMPING SYSTEM SOLUTIONS From the simplest single pump system to the most complex multi-pump system with environmental enclosures, SyncroFlo packaged pumping systems are the solution to your specific application. Everything is designed to your project specifications. Whether you have a small pump skid being installed in a pump room or a large industrial system with multiple pump and driver combinations complete with enclosure, we have the right solution for you. All systems are manufactured in accordance with NPFA 20 and NEC. The product arrives on site, ready to be installed and put into operation faster and more cost efficient than traditional site built systems.

COMPLETE SYSTEM SINGLE SOURCE RESPONSIBILITY

When you have SyncroFlo products on your project, you truly have total system single source responsibility. From inspection to commissioning, we provide complete system design. With a global network of factory certified technicians, startup commissioning and acceptance testing is just part of the service we provide. If any issues arise, from a ½” drain valve to a 300 HP diesel engine after installation, SyncroFlo is the only phone call you need to make to get the problem solved and your system back online. QUALITY CONTROL AND TESTING Every day, we strive to provide our clients with the highest quality pumping systems. Our systems are manufactured in an ISO 9001-2008 certified facility in Norcross, GA. All systems undergo quality inspection at each stage of the process in our 155,000 sq. ft. facility. These inspections include an engineering review before the submittal and manufacturing process, as well as individual inspections at each stage of the manufacturing and assembly process. All quality inspection data is recorded on a hand-held device and uploaded via a web based app. With the major equipment pumps and drivers being tested by the respective manufacturer, SyncroFlo hydrostatically tests all piping in accordance with NFPA 20 requirements. Systems with enclosures receive a full test of all ancillary equipment related to the pump system enclosure. We also offer full witnessed factory acceptance testing in an NIST certified test facility.

FIRE - COMMERCIAL, INDUSTRIAL, POWER

SyncroFlo, Inc.

2905 Pacific Drive Norcross, GA 30071 Tel: (770) 447-4443 www.syncroflo.com

FIRE - COMMERICAL, INDUSTRIAL, POWER

Thermostat Controlled Unit Heater

Exhaust Fans

Hose Valve Header Testing Device

City Water Bypass

Moisture/Dust Proof Light Fixtures

Flow Meter Testing Device

Automatic Air Release Valve

Jockey Pump Controller

Environmental Enclosures

Fire Pump Controller

1 or 2 hour Fire Walls

Welded Lifting Lugs

Step Down Transformer

4 Levels of Coating Systems (to meet an enviromental requirement)

Electrical Motor or Diesel Engine Driven Pumps

Flanged Customer Connections

Jockey Pump

NFPA 13 Sprinkler System

Welded Carbon Steel Skid Assembly

PUMP TYPES Flex Coupled End Suction, Veritcal Inline, Horizontal Split Case & Vertical Turbine

FEATURES • ETL Listed • In Accordance with NFPA 20 & NFPA 850

• Storage Tank Fill and Heating Systems • Surge Protection and Pressure Reducing Systems

• UL 508 Control Panels • 2, 3 & 4 Pump Designs • Split Skid Configurations

• Environmental Enclosures • 1 & 2-Hour Rated Fire Walls

PERFORMANCE  • 3” - 24”Discharges • Flow from 5,000 - 20,000 GPM • Heads from 300 - 4500 PSI

• Common Suction & Discharge Headers • Electric Motor or Diesel Engine Driven Pumps • Carbon Steel Piping • FBE Coated Carbon Steel Piping for Sea Water Use • Common Suction & Discharge Headers

• Systems for Classified Areas Available • Coating Systems for Any Environmental Conditions • On Skid Backflow Prevention • On Skid Domestic and Irrigation Booster Systems • Foam Systems

FIRE - COMMERCIAL, INDUSTRIAL, POWER

Page 1 Page 2

Made with FlippingBook - professional solution for displaying marketing and sales documents online