FUEL SYSTEM ACCESSORIES
CUMMINS Banjo Snubber 12MM x 1.5 thread (‘89-‘07, 5.9L) Dampens the pressure spikes of the Cummins lift pump. The snubber installs at the filter housing and takes the place of a 12mm banjo bolt and makes fuel pressure gauge installation easy. (Gaskets included.) Designed specifically for Cummins 5.9L diesel engines and dampens the pressure spikes of the lift pump. It installs at the injection pump only and takes the place of a 14mm banjo bolt and makes fuel pressure gauge installation easy. (Gaskets included.) CUMMINS Banjo Snubber 14MM x 1.5 thread (‘94-‘98)
Fuel Pressure Test Adapter with Schrader Valve and Adjustable Snubber (‘89-‘07, 5.9L) This kit works with the VULCAN Universal Fit Fuel Pressure Line (VULCAN-FH). Fuel Pressure Test with Schrader Valve Adapter (‘89-‘07, 5.9L) The Fuel Pressure Test Adapter allows for a quick and easy fuel pressure check on all Ram trucks with the Cummins Turbo Diesel engine. Testing the fuel pressure is a must when diagnosing fuel delivery problems. Kit includes: banjo fitting, gaskets, and Schraedar valve with cap. GATES Barricade ® Fuel Line Heavy Duty replacement fuel hose. Will work with Diesel, Bio-Diesel, gas and other fuel types. We also offer 5/16” diameter fuel hose to repair/replace the problematic fuel return hose used on ‘94-‘98, 12-valve engines. Auto Meter Fuel Pressure Line If you are installing an AutoMeter electric fuel pressure gauge in your Ram Cummins truck, you MUST install this braided stain- less steel line kit and #3279 fuel pressure snubber (sold separately) to prevent pre- mature failure of the sending unit. Failure to do so will void the gauge warranty. Auto Meter Fuel Pressure Snubber Recommended on all AutoMeter electric fuel pressure gauges installed in Ram Cummins trucks. 1/8 NPT RLT Snubber It is highly recommend that you use this snubber on trucks with the VP-44 injection pump to dampen the fuel pulsations (hydraulic hammering) created by the injection pump. Fuel Pressure Tee Inline fuel pressure tee available in either 1/2”, 3/8” or 5/16” diameter barbed fittings with 1/8 NPT threaded fitting. Works well with aftermarket FASS fuel systems. Fuel Filter Plug (‘89-‘96) This billet aluminum plug is handy to have when your truck’s water-in-fuel sensor/ drain fails and is leaking fuel. Install it and stop the leak.
GG-FPSNUB-KIT $26.95
‘89-‘07, 5.9L BF-BBS010 $26.19
FPADPT-KIT $21.95
‘94-‘98 BF-CBS010 $26.69
5/16” DIAMETER GATES-27324 $3.95/ft. 3/8” DIAMETER GATES-27325 $3.95/ft. 1/2” DIAMETER GATES-27326 $4.25/ft.
M12 X 3/8 B1206: $7.49 each M14 X 3/8 B1406: $7.49 each
Barbed Banjo Fitting Clamp included with fitting.
Individual Tapped (M12) Banjo Fittings (‘89-‘93 & ‘98.5-‘07, 5.9L) These Banjo Fittings feature a large diameter (.187” vs. .130”) fuel port. The fittings are SAE (3/4” hex) vs. the stock 17mm hex design. Fitting on the top is the standard fitting, while the fitting on bottom has a built-up hex drilled to accept a 1/8 NPT male threaded fuel pressure sensor. (Requires 2 replacement gaskets. Gaskets on page 77.)
TAPPED BF-LONG-TAPPED $7.00 UNTAPPED BF-LONG-UNTAPPED $4.50
AM-3227 $61.95
AM-3279 $28.95
TAPPED GG-BFTAPPED-KIT $10.95 UNTAPPED GG-BFUNTAPPED-KIT $7.95
Individual (M12) Banjo Fitting and Gasket Kit (‘89-‘93 & ‘98.5-‘07, 5.9L) Includes (1) Banjo Fitting (above) and (2) Gaskets
RLT-SNUBBER $8.00
Vulcan Performance Jacobs Brake Fuel Line Adapter This 1/2” 12MM adapter is designed for use with trucks equipped with a Jacobs Brake. When fitting a fuel line to the injection pump there is a clearance issue. Allows for pump clearance without using a restrictive banjo fitting. Vulcan Performance Modified Fuel Module (‘98-’04, 2500/3500) Replacement aftermarket fuel tank module without fuel pump. Uses factory 3/8” pickup and 5/16” return quick-connect fittings. Tank seal included. Freddy Frugal says this fuel module is less than the price of OEM. See pg. 78 for MOPAR Fuel Module #4897668AI. Vulcan Performance Female Quick-Connect Fuel Fitting - to 3/8” Connects 3/8” quick connect to 3/8” barbed fuel fitting.
VULCAN_PBF $20.00
1/2” DIA. FPT_1-2: $12.50 3/8” DIA. FPT_3-8: $12.50
GG-FFPLUG $15.00
VULCAN_MFM20E $229.99
Fuel Tank Vent, Rollover Valve (‘94-‘02, 2500/3500 5.9L)
52127666 $37.95
Fuel Module Rollover Valve Grommet (‘94-‘02, 2500/3500 5.9L)
5217802 $7.95
VULCAN_FQC6 $8.00
BDFuel Distribution Block Kits These billet aluminum blocks are used to replace the factory fuel filter housings after the installation of an aftermarket fuel pump/filtration system (FASS, etc.). All mounting hardware and fuel fittings are included. Also has pressure ports for checking fuel pressure.
‘10-‘18, 6.7L BD-1050371 $102.95 ‘03-‘09, 5.9L & 6.7L BD-1050370 $112.95
Lift Pump to 3/8” Barbed Inlet Fitting (‘94-‘98 12-valve)
GG-LPBF9402 $7.95
Mechanical Fuel Pump Blockoff Plate (‘94-‘02, 5.9L 12V & 24V)
FPE-CUMM-FBOP $36.74
Ram Turbo Diesel Parts & Accessories #126 74
Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info
Made with FlippingBook Ebook Creator