FUEL SYSTEM ACCESSORIES
Fuel Pressure Test Kit (‘98.5-‘02, 5.9L)
BILLET ALUMINUM FUEL CANISTER CAP ‘10-‘24 LT-67FUELCAP: $86.95
This kit is a 2-1/2” liquid filled 0-30 psi gauge in a stainless steel housing with a built in snubber, Weatherhead 250 psi hose, brass push-lock fittings and brass Schraeder valve actuator for ‘00-‘02 trucks (with rubber seal and knurled thumb screw). Ships with 1/8 NPT fitting for use with ‘98.5-‘99 trucks. NOTE: Purchase the FPADPT-KIT to allow you to check the fuel pressure on all ‘89- ‘97, 12V and ‘03-‘07, 24V trucks. VULCAN Draw Straw I (‘94-‘04) The CNC machined billet Draw Straw I features dual ports which allows the user to install a regulated return fuel system without drilling the top of the module or cutting the filler neck tube for a second return line. This makes for a clean and secure installation. Works with 3/8” and 1/2” fuel line . NOTE: Will not work on trucks equipped with and in-tank pump. VULCAN Draw Straw III (‘98.5-‘18) The Draw Straw™ 3 Is the threaded version of the original Draw Straw 2 for use with plastic or metal tanks in Dodge trucks of 3/8” thickness or less. This unit is a single port billet aluminum fitting that requires a 3/4” hole to be drilled in the tank. This design keeps all threaded connections out of the tank so there is nothing to come loose inside. The 16” draw tube is compatible with all motor fuels. VULCAN Draw Straw V (‘98.5-‘18) The Draw Straw V HiFlow allows for greater fuel volume by using 1/2” plumbing. The DSV installs inside the tank module in place of the factory pump on fuel systems/tanks in ‘05-‘09 trucks. You can use the original OEM supply connection as the FASS return line putting more fuel back into the module for low fuel level situations. No tank drilling! A simple 5/8” inch hole in the module is all that’s required to insert the DSV HF fitting. Works with 3/8” and 1/2” fuel line . VULCAN Filter to Injection Pump Hose Kit (‘98.5-‘07, 5.9L) This hose connects the fuel filter outlet to the injection pump. It is great for those with a FASS HPFP or other systems who want to completely eliminate the restrictions in the fuel supply circuit. VULCAN Universal Fit Fuel Pressure Line (‘98.5-‘02) This hose is 1/4” diameter (inside diameter), 30” in length, and is rated for 100 psi. The assortment of fittings for each end of the hose allow you to add a fuel pressure sending unit to the fuel system. Purchase a tapped banjo bolt to use this fuel pressure line on other year trucks.
Is your plastic fuel filter canister cap showing the signs of aging? You know, the rounded-off shoulders of the 28mm hex head. We’ve also seen the caps over- torqued and cracked. Here is a stylish and functional solution. A billet aluminum fuel cap that fits the 2010-newer Ram 6.7-liter Cummins Diesel engines.
VULCAN_TEST_KIT $69.99
Fass drop-in fuel system
‘10-‘18, 6.7L, 2500/3500 ‘21-‘24, 6.7L, 2500/3500 FASS_DIFSRAM1001: $479.00
VULCAN_DS1 $79.99
The FASS Drop-In Series Diesel Fuel System was engineered by FASS to be the most effective filtration solution for the 6.7L Cummins. Backed by their limited lifetime warranty, the Drop-In Series Fuel System protects your 6.7L Cummins from the issues caused by fuel contamination. Without proper fuel filtration, modern diesel injection systems are prone to excessive wear. By removing over 99% of the water from your diesel fuel, along with
VULCAN_DS3 $42.00
entrained air and debris down to 2 Microns, the Drop-In Series System protects the 6.7L Cummins’ injection system from premature failure. Additionally, the drop in series kit retains use of the factory lift pump and will bypass the factory fuel filters to allow use of cost-effective replacement filter and water separator without the worry of using substandard or cheap counterfeit filters. Also, this system is the only system on the market that retains the function of the factory water in fuel light. And if reliability, quality, and filtration isn’t enough, this system can be installed in an hour or less! This is a true plug-and-play system, requiring no cutting, wiring, or additional modifications. Our industry-leading water removal capabilities (3rd-party proven to exceed 99%) are reinforced by the unique design of our Extreme Water Separator (XWS). If our XWS reaches capacity, it acts as a dam, shutting down your truck and preventing major destruction of fuel system components. Unlike other water separators that will eventually allow moisture to bypass the media damaging your fuel system. Find filters on page 7.
VULCAN_DS5 $75.99
VULCAN_VP02 $53.99
VULCAN-FH $25.99
Order 770-886-2500 or genosgarage.com 75
Product prices subject to change without notice.
Made with FlippingBook Ebook Creator