Die Assembly
®
109
Hoist Rings - INCH
Whether you're hoisting an 800-pound die base or a 15,000-pound piece of die room equipment, DME Hoist Rings can add a margin of performance and convenience to the job at hand. The inherent danger posed by conventional static eyebolts (side-load breakage and hook disengagement) combined with stricter safety regulations make our Hoist Rings an important addition to any die shop or plant. Unlike eyebolts, these Hoist Rings will not yield to heavy side loads within their rated capacity and can pivot 180° and swivel 360° to compensate for pitch, roll and sway when lifting heavy, unbalanced loads. As with all mechanical devices, regular inspection for wear, and strict adherence to installation and operatingguidelines is necessary to prevent failure due to misuse. • Safer and stronger than conventional eyebolts • Pivots and swivels to compensate for pitch, roll and sway when lifting heavy or unbalanced loads • Prevents accidents caused by eyebolt breakage or lifting hook disengagement
180° PIVOT
360° SWIVEL
• Will not yield to heavy side loads when used in accordance with manufacturer’s instructions • Manufactured from high-quality alloy steel (certified heat treatment) • Meets or exceeds MIL-STD-1365 (OR-11) and MIL- STD-209C • Seven sizes to handle loads from 800 to 15,000 pounds • Safety factor is 5 times the rated load capacity in any direction
Made with FlippingBook - professional solution for displaying marketing and sales documents online