Hoist Rings - INCH Installation and Ordering Information Die Assembly
®
110
MATERIAL: ALLOY STEEL (CERTIFIED HEAT TREATMENT), BLACK OXIDESAFETY FACTOR: 5 TIMES RATED LOAD IN ANY DIRECTIONRANGE OF MOVEMENT.: 360° SWIVEL; 180° PIVOT DIMENSIONS: SHOWN IN INCHES (IN)
Installation Data Tap workpiece for hoist ring bolt with axis vertical to mounting surface. Work surface should
be flat and smooth to provide full 360° flush seating for the bushing flange. For installation in ferrous materials, the screw should be tightened to the full torque loading recommended in column TL below, +25% – 0. Safety Note: : Some loosening may develop after prolonged service in a permanent installation. It is advisable to periodically retighten the mounting bolt to maintain the specified torque value.) For maximum safety with soft metal workpieces such as aluminum, use extra length bolts with minimum effective thread engagement of 2 times thread diameter. The use of free fit spacers between the bushing
flange and mounting surface is not recommended, as this will reduce the safe load rating on angularly applied loads. Hoist ring must be free to swivel 360° and pivot 180° at all times.
®
NOTE: Additional hoist
ring sizes and bolt lengths (including metric versions) are also available on
Hoist Rings – SH (includes bolt and retaining ring)
E EFFECTIVE THREAD PROJECTION F
RATED LOAD (LBS)
H CLEARANCE DIMENSION J
TL** FOOT LBS WEIGHT
ITEM
A
B
C
Ø D
G
K
L
SHR0001 SHR0002 SHR0003 SHR0004 SHR0005 SHR0006 SHR0007
800 7 /16
15/8 41/64 3/8
9/16 9/16
25/8 5/16-18 25/8 3/8-16 43/4 1/2-13 43/4 5/8-11 43/4 3/4-10
2 2
1 1 2 2 2 3
3/4 3/4
3/32 3/32
7
5 OZ. 5 OZ.
1,000 2,500 4,000 5,000
7/16
15/8 41/64
3 /8
12 28 60
7/8 7/8 7/8
31/4 15/32 3/4 31/4 15/32 3/4 31/4 15/32 3/ 4
3/4
35/8 35/8 35/8 51/8 61/2
11/2 3/32 11/2 3/32
2 LB. 5 OZ. 2 LB. 7 OZ. 2 LB. 9 OZ.
1 1
11/2
3 /32
100 230 470
10,000 15,000
113/32 413/16 111/16
1
1 1/2 17/8
61/2
1 "-8
25/16 17/64
7 LB.
13/4
6
21/8 11/4
8 3/4 11/4-7
33/4 31/4 11/32
14 LB.
Replacement Bolt Kits – SHK (includes bolt and retaining ring)
ITEM NUMBER USED WITH
SIZE
E
**RECOMMENDED TORQUE LOAD +25% – 0
SHK0001 SHK0002 SHK0003 *SHK0004 SHK0005 *SHK0006 SHK0007 *SHK0008 SHK0009 *SHK0010 SHK0011
SHR0001 5/16 -18 X 11/4 9/16 SHR0002 3/8 -16 X 11/4 9/16
1/2 -13 X 2
3/4
SHR0003
1/2 -13 X 21/4 5/8 -11 X 21/4
1 1
SHR0004
5/8 -11 X 21/2 11/4
NOTES: E = EFFECTIVE THREAD PROJECTION *BOLTS NOT MARKED WITH AN ASTERISK (*) ARE IDENTICAL TO THOSE SUPPLIED WITH HOIST RINGS. BOLTS MARKED WITH AN ASTERISK ARE LONGER, TO PROVIDE THREAD PROJECTION OF TWICE THE BOLT DIAMETER, RECOMMENDED FOR USE WITH SOFTER METALS.
3/4 -10 X 21/4
1
SHR0005
3/4 -10 X 23/4 11/2
1 "-8 X 31/4 1 "-8 X 33/4 11/4 -7 X 4
11/2
SHR0006
2
SHR0007
17/8
U.S. 800-626-6653 • Canada 800-387-6600 • dme.net • store.dme.net
Made with FlippingBook - professional solution for displaying marketing and sales documents online