Slide Action Components
®
30
Angle Pins
Angle Pins are supplied with a pre-machined spherical radius on the head to eliminate angle grinding usually required on the pin head.
® Die Machining and Installation Dimensions
Angle Pins– APD Material: H-13 Type Steel, 65-74 HRC Nitrided Surface, 30-35 HRC Core
ITEM NUMBER APD-0305 AND APD-0307 APD-0405 THRU APD-0410 APD-0505 THRU APD-0510 APD-0607 THRU APD-0614 APD-0807 THRU APD-0814
ITEM NUMBER Ø D
L LENGTH
M MAX
K HD THK
R SPH RAD
Ø A* B C
Ø D
Ø H
Ø P
10° 15° 20° 10° 15° 20° 10° 15° 20° 10° 15° 20° 10° 15° 20°
.256 .264 .275 .258 .268 .283 .260 .273 .291 .324 .339 .361 .328 .348 .377
APD-0305 APD-0307 APD-0405 APD-0407 APD-0410 APD-0505 APD-0507 APD-0510 APD-0607 APD-0610 APD-0614 APD-0807 APD-0810 APD-0814
5.00 7.00 5.00 7.00
.87
.3740
.500
.250
.3765
.375
*.3765
.562
1.37
.87
.4990
1.37 1.37
.625
.250
.5015
.500
*.5015
.688
10.00
5.00 7.00
.87
.6240
1.37 1.37 1.37 1.37 1.37 1.37 1.37 1.37
.750
.250
.6265
.625
*.6265
.812
10.00
7.00
.7490
10.00 14.00
.875
.312
.7515
.750
*.7515
.938
7.00
.9990
10.00 14.00
1.125
.312
1.0015 1.000
*1.0015
1.188
Installation Notes 1. Ø A dimensions specified for hole will provide approximately .000 to .001 clearance with the Ø P or press fit area of the angle pins. Diemaker to adjust Ø A hole dimensions to obtain specific fit required. 2. Cut angle pin to length as required to achieve desired travel on slide. Typically, a spherical radius or cone shape with a spherical radius is See D-M-E Standard Angle Pin Inserts, pre-machined for 10°, 15° or 20° angles.
*REFER TO INSTALLATION NOTE #1.
ALL ITEMS IN STOCK. How to order: Use Item Numbers in charts for ordering.
U.S. 800-626-6653 • Canada 800-387-6600 • dme.net • store.dme.net
Made with FlippingBook - professional solution for displaying marketing and sales documents online