Cooling
®
40
Bubbler Tubes & Brass Diverting Plugs & Rods
Bubbler Tubes Available in brass or 304 stainless
steelBubbler Tubes are used for cooling cores in dies. They are supplied threaded at both ends, thus permitting two threaded tubes to be cut from the 18" length supplied. They can be used as replacement tubes in Cascade Water Junctions. BRASS BUBBLER TUBES – BT
ITEM NUMBER
Ø CHANNEL
O.D.
I.D. 069
THREAD NO. 5-44
+000 -.004 +000 -.004 +000 -.005 +000 -.006 +000 -.006
BT-105
125
144
BT-210
190
126
NO. 10-32
228
TYPICAL APPLICATIONS
BT-340
250
170
1/4-28
302
®
BT-450 BT-570
312 437
214 307
5/16-24 7/16-20
377 531
304 STAINLESS STEEL BUBBLER TUBES – BTS
ITEM NUMBER BTS-100
Ø CHANNEL
O.D.
I.D. 078
THREAD NONE*
+000 -.004 +000 -.004 +000 -.004 +000 -.005 +000 -.006 +000 -.006
093
120
BTS-105
125
069
NO. 5-44
144
BTS-210
190
126
NO. 10-32
228
BTS-340 BTS-450 BTS-570
250 312 437
170 214 307
1/4-28 5/16-24 7/16-20
302 377 531
*PRESS FIT
Brass Diverting Plugs and Rod for Steam and Waterlines
Brass Diverting Plugs and Rods are used to redirect water flow through waterlines drilled in a mold or die. The plugs are pushed into the waterline, and the rods are cut to appropriate lengths to serve as spacers or stops between the plugs. All plugs are proportionately longer than their diameter to ensure that they will pass by intersecting waterlines without twisting into them.
TYPICAL APPLICATION
BRASS DIVERTING PLUGS – BF
ITEM NUMBER
DIA ±002
LENGTH
BF-50
5/16
62
BF-70
7/16
62
BF-90
9/16
75
BF-110 BF-150
11/16 15/16
87
1 25
BRASS ROD – BFR (1/8 DIA. X 18" LONG)
ITEM NUMBER BFR-18
U.S. 800-626-6653 • Canada 800-387-6600 • dme.net • store.dme.net
Made with FlippingBook - professional solution for displaying marketing and sales documents online