Cooling
®
42
Cascade Water Junctions
Cascade Water Junctions are ideal for cooling die-cast dies where drilled waterlines through the block are not possible due to interference with ejector pins, sprue puller pins, etc. The brass tube has the rigidity to maintain uniform spacing inside the water channel and is threaded into the body for firm support. Waterlines may be connected to the same side or opposing sides of the brass hexagonal body. The Nipple Type Water Junction provides low-cost rigid installation. The 2" long pipe nipple can be replaced with a longer pipe nipple to suit the application. The Jiffy-Tite Socket Type is more easily connected and disconnected when die is set-up, transported or stored. The socket is equipped with internal Viton seals (P300-8).
NIPPLE TYPE
Nipple Type – DC (Includes pipe nipple and brass bubbler tube)
®
Jiffy-Tite Socket Type – JSC (Includes brass bubbler tube)
JIFFY-TITE SOCKET TYPE
Cascade Water Junctions-DC
NIPPLE TYPE
JIFFY-TITE SOCKET TYPE
STD. PIPE TAP (3 PLACES)
ITEM NUMBER
M
E
A
B
C
L
ITEM NUMBER
DC-131
1/8 1/4 1/8 1/4 1/4
134 134 184 184 184
33 33 34 34 34
33 33 50 50 50
22 22 25 25 25
69 69
—
—
DC-131-A
3 29
JSC-304
DC-132
1 00 1 00 1 00
—
—
DC-132-A
3 82
JSC-314
DC-136-A*
—
—
*SPECIFICATIONS for DC-136-A (see drawing above): 1 5/16-24 UNF 2 3/8 NPT x 2” 3 5/16 O.D. - .040 WALL
Typical Applications
U.S. 800-626-6653 • Canada 800-387-6600 • dme.net • store.dme.net
Made with FlippingBook - professional solution for displaying marketing and sales documents online