Die Components - INCH
®
51
Guided Ejection Guide Pins
Guided Ejection Guide Pins – GL
• Short press fit lengths for use in guided ejection applications • Pins are hardened and precision ground SYSTEM 1 When pins are installed in the support plate, ejector housing can be removed from die without removing ejector plates, permitting easy access to service the ejector system. SYSTEM 2 Pins installed in the ejector housing permit fast, low-cost installation. When ejector housing is removed from the die, the complete ejector assembly is removed. It is recommended that a minimum of four pins and bushings be installed. Size of the pins and bushings should be determined by the size of the die. The Guided Ejection System is an inexpensive method to protect against wear and costly damage to a die in production.
System 1
System 2
Properly installed, the Guided Ejection System holds the ejector assembly in alignment and supports the weight of the ejector assembly throughout the entire machine cycle. This greatly reduces wear General Dimensions
Ø D = 7/8 I.D. .874 +.0000 -.0005
Ø D = 1" I.D. .999 +.0000 -.0005
Ø D = 11/4 I.D. 1.249 +.0000 -.0005
Ø D = 11/2 I.D. 1.499 +.0000 -.0005
Ø D = 3/4 I.D. .749 +.0000 -.0005
L LENGTH +.00 -.06
ITEM NUMBER
ITEM NUMBER
ITEM NUMBER
ITEM NUMBER
ITEM NUMBER
S
S
S
S
S
33-/4 7/8
5004-GL 7/8
5103-GL 7/8
5202-GL 7/8
5302-GL 1-3/8
5402-GL
4-1/4 7/8 PF-5005-GL 7/8 PF-5104-GL 7/8 PF-5203-GL 7/8
5303-GL 1-3/8
5403-GL
4-3/4 7/8 PF-5006-GL 7/8 PF-5105-GL 7/8 PF-5204-GL 1-3/8
5304-GL 1-3/8
5404-GL
5-1/4 7/8 PF-5007-GL 7/8 PF-5106-GL 7/8 PF-5205-GL 1-3/8
5305-GL 1-3/8
5405-GL
5-3/4 7/8 PF-5008-GL 7/8 PF-5107-GL 7/8 PF-5206-GL 1-3/8
5306-GL 1-3/8
5406-GL
6-1/4
— — — — — —
1-3/8
5307-GL 1-3/8
5407-GL
Ø E +.0005 -.0000
NOTES: 1. Select corresponding bronze-
NOMINAL DIA
Ø D +.0000 -.0005
Ø H (MAX)
plated guided ejection bushings or self-lubricating guided ejection bushings in proper diameter for the application. 2. Guided Ejection Systems are available installed in standard dies. For additional information and prices, contact us.
K
.749
.990
3/16
.751
3/4
7/8
.874
1.115
1/4
.876
1 "
.999
1.240
1/4
1.001
1-1/4
1.249
1.490
5/16
1.251
1-1/2
1.499
1.740
5/16
1.501
ALL ITEMS IN STOCK.
Made with FlippingBook - professional solution for displaying marketing and sales documents online