Die Components - INCH
®
54
Support Pillars & Stop Pins
Support Pillars Support pillars are universally adaptable for cap screw, threaded locating pin,or socket set screw applications. Order pillars from chart at left and required “fasteners” as listed below. Cap Screw (S.H.C.S.) Applications 3/8 -16 or 5/8 -11 socket head cap screws can be ordered in length required.
MATERIAL: S.A.E. 1040 STEEL
Ø D +.000 -.060 DIAMETER
C +.001 -.000 HEIGHT
ITEM NUMBER
Threaded Locating Pin Applications
2.500 3.000 3.500 4.000 4.500 2.500 3.000 3.500 4.000 4.500 5.000 6.000 2.500 3.000 3.500 4.000 4.500 5.000 6.000 2.500 3.000 3.500 4.000 4.500 5.000 6.000 5.000 6.000 8.000 5.000 6.000 8.000
6090 6091 6092 6093 6094 6130 6131 6132 6133 6134 6135 6136 6140 6141 6142 6143 6144 6145 6146 6150 6151 6152 6153 6154 6155 6156 6235 6236 6238 6245 6246 6248
Ø D PILLAR
ITEM NUMBER
1 "
®
1 " TO 2"
TLP-38
Ø D PILLAR
ITEM NUMBER
QTY PER PACKAGE
11/4
1 " TO 2"
SSS-38114
10
3 " AND 4"
SSS-582
5
Stop Pins Although every Die assembly has flat stop pins welded to the underside of the ejector plate, many diemakers require these dowel-type Stop Pins for special
11/2
TYPICAL INSTALLATION
2 "
ORDER PINS IN PACKAGE LOTS ONLY.
3 "
ITEM NUMBER
QTY PER PACKAGE
4 "
7100
50
*HEAD THICKNESS .020 OVERSIZE TO PERMIT FITTING AT ASSEMBLY.
U.S. 800-626-6653 • Canada 800-387-6600 • dme.net • store.dme.net
Made with FlippingBook - professional solution for displaying marketing and sales documents online