Tarja para cocina Avery®
D21180SB3020.415
Blanco
29-3/4" (755 mm)
28-3/16" (716 mm)
6-1/4" (159 mm)
• Tarja de cerámica • Instalación de montaje empotrado
6-1/4" (159 mm)
20" (508 mm)
• Se requiere gabinete de 33 pulgadas (838 mm) • Garantía limitada de 5 años en el fregadero • Garantía de 1 año en accesorios incluidos • Incluye desagüe, rejilla protectora de acero inoxidable y contracanasta
Ø3-1/2" (Ø90 mm)
18-7/16" (468 mm)
PORTSMOUTH ® 23 x 21 SINGLE BOWL STAINLESS STEEL KITCHEN SINK 18 GAUGE STAINLESS STEEL
10" (254mm)
8-3/4" (223mm)
PORTSMOUTH ® 23 x 21 SINGLE BOWL STAINLESS STEEL KITCHEN SINK
Tarja para cocina Portsmouth® ❏ 18SB.9232100S.075 • Single Bowl Stainless Steel kitchen sink • 18 Gauge Stainless Steel • 9" Deep Bowl • Offset Drain • Undermount installation • 27" (686mm) cabinet required • Includes: - 9028000.075 Waste Fitting 18SB.9232100S.075 - 791676-100.0070A Undermount Sink Clips • Side and Bottom Sound Deadening Pads with undercoating • Cutout template and instructions included • Limited Lifetime Warranty 9" (229mm)
PORTSMOUTH ® 23 x 21 SINGLE BOWL STAINLESS STEEL KITCHEN SINK 18 GAUGE STAINLESS STEEL
Acero inoxidable
11-9/16" (293mm)
Nominal Dimensions: 23-1/8" x 21" x 9" (587 x 533 x 229mm)
• Fabricada en una sola hoja de acero inoxidable calibre 18 • El sistema SoundSecureTM reduce el ruido del agua y los objetos • El sistema de aislamiento StoneLockTM reduce aún más el ruido y previene condensación de humedad bajo la tarja • Incluye sistema de montaje bajo cubierta y contracanasta SEE REVERSE FOR ROUGHING-IN DIMENSIONS AND PRODUCT SPECIFICATIONS
6-3/8" (162mm)
20-15/16" (532mm)
Bowl Size: 21-1/4" (540mm) wide 18-7/8" (479mm) front to back 9" (229mm) deep 18-15/16" (481mm) Ø4-15/16" (Ø125mm)
Ø3-9/16" (Ø90mm)
PORTSMOUTH ® 23 x 21 SINGLE BOWL STAINLESS STEEL KITCHEN SINK 18 GAUGE STAINLESS STEEL
21-3/16" (538mm)
23-3/16" (588mm)
Compliance Certifications - Meets or Exceeds the Following Specifications: • ASME A112.19.3
9" (229mm)
11-9/16" (293mm)
NOTES: * DIMENSIONS SHOWN FOR LOCATION OF SUPPLIED AND “P" TRAP ARE SUGGESTED. FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY. SEALING COMPOUND SUPPLIED BY OTHERS.
6-3/8" (162mm)
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.3. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
20-15/16" (532mm)
16
Ø3-9/16" (Ø90mm)
Ø4-15/16" (Ø125mm)
© 2017 AS America Inc.
L40
spec_18SB.9232100S.075 Portsmouth 23x21 SS KitchenSink 2/17
18-15/16" (481mm)
Made with FlippingBook Digital Proposal Creator