Maximize Uptime, Productivity and Profit by Choosing a Quality Coupling Ease of installation and “ replace in place design ” (no need to move driver or driven equipment) will save your operation on maintenance and downtime expenses
No lubrication * No metal to metal contact between coupling parts * May be installed horizontally or vertically; can rotate in either direction. * Initial cost is low and maintenance and downtime are minimal. *High temp insert available up to 350 degrees. * Elastic insert is highly resistant to humidity, oils, corrosion and chemicals. All couplings are machine d from solid Carbon steel rounds making them inherently balanced. Stainless Steel available in 30 3, 304,316 as well as our cost savings Melonite Process alternative to Stainless Steel.
Original A Series ®
Millennium Series ®
ATRA-FLEX ® innovated many followed
More torque, smaller package up to 3,610,000 (lb-in)
T-Flex ® Severe Duty, Higher Performance Absorbs Extreme Torsional Shock and Vibration, Suitable for Horizontal and Vertical Use, Reversing and Start – Stop Applications, Generates Less Reactionary Loads which Significantly Increases Bearing Life Application Range T-Flex® coupling sizes available to transmit torque loads from 60 lb-in to over 1,570,000 lb-in with shaft capacities ranging from .375 to over 20.00 running from low rpm to over 18,000 rpm
ATR Sales Inc. has been the proud manufacturer of ATRA-FLEX® Flexible Couplings for over 36 years.
Melonite Process Available
Closed Couplings
Increased surface Hardness
Spacers
Limited End Float
Lower coefficient of friction
floating shafts
Enhanced surface lubricity
Flywheels
Improved running wear
Brake Disc
For more information or to locate or local Sales Rep or distributor contact us at www.atra-flex.com
performance
Custom designs
Enhanced corrosion resistance
Bushings
QD
Increase Carbon steel up to a
Taper Lock
57.6 RC
Page 1Made with FlippingBook Digital Proposal Creator