chromatography & spectroscopy TLC SEPARATION TANK
TLC developing tanks are used to run up to 5 TLC plates for separation. The tank can be equilibrated for 30 minutes prior to running the plate to yield good result. TLC Developing tank supplied to gather with the lid.
Rectangular shaped TLC developing tanks are used to develop 20x20 cm TLC plates.
catalogue number 108.01.016
pack quantity 1 piece
TLC PLATES
Silica 60, specific surface (BET) - 500 m2/g, mean pore size 60A, specific pore volume 0,75 ml/g, particle size 5 - 17 µm standard grade. Binders: highly polimeric products, which are stable in almost all organic solvents and resistant towards aggressive visualisation reagents.
108.01.001 108.01.015 catalogue number
product descriptions TLC precoated plates SIL G-25 ALUGRAM” Xtra”sheets SIL G / UV 254
thickness of layer 0,25 mm 0,20 mm
pack quantity 25 pieces 25 pieces
material glass sheet aluminium sheet
dimensions 20 x 20 cm 20 x 20 cm
TLC SPRAY KIT
TLC SPRAYER - “with gas canister”
TLC sprayer provide a fine, uniform spray all over the TLC plate surfaces for optimization of TLC plates. With it’s unique design offer easy-to- use and easy-to-clean options. Based on a simple technology where the aeresol canister is situated above the reservoir bottle. A small press of the lever highly pressuries the lower glass reservoir bottle releasing a fine mist of spray. Propellant mixture is eco-friendly and does not harms the nature. Guarantees homogenous distribution, even coverage and minimum reagent consumption. Gas canister serves as handle. Cap fits to all 38 - 40 thread reagent bottles.
Offers an economical solution for TLC spraying. Provides a fine uniform spray ideally adjusted for TLC practices. Supplied complete with 100 ml erlenmeyer with sprayer head and a rubber pressure bellow.
pack quantity 1 piece
pack quantity 1 piece
catalogue number 108.02.002
catalogue number 108.02.001
Filling: Pour the TLC reagent into the bottle. Never fill above the shoulder line.
Mounting: Attach TLC sprayer to the bottle by turning anti- clockwise. Never shake the sprayer during mounting.
Spraying: Start spraying with the sprayer and release the button while the sprayer is still moving at the end of the TLC plate to avoid reagent loss. For best performance a spraying angle between 90º and 45º is required. Also always hold the sprayer at a distance between 15 cm to 30 cm from TLC plate surface.
Made with FlippingBook - professional solution for displaying marketing and sales documents online