ECD and ECTD controllers for EC and ECT electric screwdrivers • Preset selection capability: Front panel or 25P I/O • Angle Control: 0.1 - 10 turns • 15 Preset Parameters: Torque, Speed, Soft Start & Angle • Auto-detection of a connected electric screwdriver when the controller is powered on* • Error display: Error code display (3 groups) • Fastening Quality Control: OK/NG monitoring of screw fastening by preset pattern of angle and/or time • PC based program for parameter settings, monitoring and real-time output • Screw counting • Front panel 7” Color LCD with touch screen • 8 Input & 8 Output flexible I/O (25P D-Sub) • Communication 1 x RS232C, 1 x Ethernet • Protocol: Modbus, Open Protocol • 4.0 MES system ready • SD Card data memory slot (memory card included) MOUNTING BRACKET (INCLUDED) The ECD and ECTD controllers are supplied with the detachable Vesa bracket. The controller can be easily hung on the wall-mounted bracket. One part of the bracket is assembled on the back of the controller. The other part is installed on the wall. Detachable Vesa Bracket Item #310214
Fastening data collection and analytics
SPECIFICATIONS Input (Electric):
companies to generate a detailed production record for every product assembled. Docu- mentation helps engineers improve assembly processes and demonstrate compliance with quality standards & regulations. Collecting and analyzing production data gives manufacturers valuable insights into their pro- duction processes. The more you know about your production process, the better you’ll be able to correct problems in real-time.
AC120VC / AC230V, 50/60Hz Output (Electric): DC38V 3.5A Dimension (W x L x H): 7 1/2” x 8” x 10 1/4” Weight: 8.6 lbs
Manufacturing processes generate a vast amount of fastening data that can provide valuable information to aid manufacturers. Data collection allows engineers to make more intelligent process decisions to minimize quality failures and maximize productivity. The smart torque control system features data collection processes for recording and storing torque and fastening information, allowing
110V CONTROLLERS ECD-4000U Controller Item #313197 For electric screwdriver models: EC-Series (40000 models) ECD-5000U Controller Item #313000 For electric screwdriver models: EC-Series (50000 models) ECTD-5000U Controller Item #313003 For electric screwdriver models: all ECT-Series models 230V CONTROLLERS ECD-4000U Controller Item #313198 For electric screwdriver models: EC-Series (40000 models) ECD-5000E Controller Item #313002 For electric screwdriver models: EC-Series (50000 models) ECTD-5000E Controller Item #313004 For electric screwdriver models: all ECT-Series models
Modbus protocol communication ECD and ECTD provide the Modbus RTU for RS232 and Modbus TCP/IP for the Ethernet port connection.
MODBUS RTU Slave ID
F Code
Data
MODBUS TCP/IP ADU Transaction ID Protocol ID Length
Unit ID
F Code
Data
*Note: Cannot simply swap electric screwdriver models without going through a few setup steps, as all of the parameter values stored with the ECD and ECTD controller are related to the prior connected electric screwdriver model.
8
9
Made with FlippingBook Annual report maker