WaveMill WGX Series ¢ Product Range
H
Standard Pitch WGX - R(S)
WGXM - R(S)
WGXF - R(S)
WGX - EW
Fine Pitch Extra Fine Pitch
Endmill
Diameter (Inch) Diameter ( mm ) ø2.0 ø2.5 ø3.0 ø4.0 ø4.0* ø5.0 ø6.0 ø8.0 ø10.0 ø32 ø40 ø50 ø63 ø80 ø100 ø125 ø160 ø200 ø250
Type
Cat. No.
Description
Standard Pitch 3 4 4 5 5 6 7 8 10
WGX40000R
4 5 6 7 7 8 10 12
WGXM40000R
Fine Pitch
Extra Fine Pitch 5 6 8 10 10 12 16 20
WGXF40000R
4 5
WGX40000EW
Endmill
4 5 6 7 8 10
WGX13000R Inch Arbor
Standard Pitch
3 3 4 4 5 6 7 8 10
WGX13000RS
Standard Pitch
6 7 8 10 12 14
WGXM13000R Inch
Arbor Fine Pitch
4 5 6 7 8 10 12 14
WGXM13000RS
Fine Pitch
8 10 12 16 20 24
WGXF13000R Inch
Arbor Extra Fine Pitch
5 6 8 10 12 16 20 24
WGXF13000RS
Extra Fine Pitch
3 3 4 5
WGX13000EW
Endmill
● Numbers inside are number of teeth - Inch Arbor
Inch Arbor - Sizes of ø6.000” and 125mm and below have coolant holes, *: 4.000” cutter diameter with 1.500” arbor diameter
¢ Precautions when Using Wiper Inserts with Holes · When mounting the wiper insert, attach it as shown in Fig 1. When mounted as shown in Fig 2, normal machined surface roughness cannot be obtained.
· The wiper insert has a single corner specification. · For milling with wiper inserts, see "The Basics of Milling, Milling Edition" in Chapter N of the General Catalog.
Fig 1
Fig 2
H19
Made with FlippingBook flipbook maker