Section H 25-26

WaveMill WFXC Series

■ General Features The WaveMill WFXC Series is a chamfering tool that uses a WFX series insert. A wide variety of grades support various work materials.

H

■ Grade Application Range

Work Material Grade Finishing to Light Cutting Medium Cutting Rough to Heavy Cutting

Work Material

Finishing to Light Cutting Medium Cutting Rough to Heavy Cutting Grade

ACU2500

ACU2500

C

ACP100

C

ACK200

Cast Iron

ACP200

P

ACK300

Steel

P

ACP300

P

T4500A

DL1000

P

ACU2500

Non-Ferrous Metal

H1

C

ACM200

Stainless Steel

ACM300

P The letters "C" and "P" at the end of each grade indicate the coating type. C

P : CVD, : PVD, Blank: Uncoated

■  Precautions for Use Chamfering tools use a straight cutting edge that enables the chamfering range to be changed depending on the nose radius (RE) of the insert mounted to the body. Work diameter: Use within the range shown in the table below, no lower than DC1 and no higher than DC2. Depth of cut: cutting to a depth shown by the distance from the tool tip (a) in a straight line to the cutting edge. (b) is possible.

Dimensions ( mm )

Insert

Min. Machining Dia. Min. Machining Dia. Minimum Depth Maximum Depth Maximum Dia.

Body

b

Cat. No.

RE DC1 0.4 7.5 0.8 8.0 1.2 8.5 0.4 15.5 0.8 16.0 1.2 16.5 0.4 24.6 0.8 25.0 1.2 25.6 1.6 26.1 0.4 31.6 0.8 32.0 1.2 32.6 1.6 33.1

DC2 15.8 15.8 15.8 23.8 23.8 23.8 38.3 38.3 38.3 38.3 45.3 45.3 45.3 45.3

a

DCX 17.8 17.5 17.2 25.8 25.5 25.2 41.3 41.0 40.7 40.4 48.3 48.0 47.7 47.4

0.1 0.2 0.4 0.1 0.2 0.3 0.1 0.2 0.4 0.5 0.1 0.2 0.4 0.5

4.1 3.9 3.6 4.1 3.9 3.6 6.8 6.6 6.3 6.1 6.8 6.6 6.3 6.1

SOMT080304 SOMT080308 SOMT080312 SOMT080304 SOMT080308 SOMT080312 SOMT120404 SOMT120408 SOMT120412 SOMT120416 SOMT120404 SOMT120408 SOMT120412 SOMT120416

WFXC08008E

45°

WFXC08016E

b

WFXC12025E

a

DC1

DC2

WFXC12032E

DCX

H209

Made with FlippingBook flipbook maker