High-Efficiency Cutter for Aluminum Alloys ANX High-speed/High-efficiency Cutting
Ultra-high efciency machining with feed rates v f = 1,200 IPM ( 30,000 mm/min )
1,400
(35,000)
1,200
(30,000)
1000
(25,000)
Cutter diameter ø100mm comparison
800
(20,000)
Feed Rate v f ( mm/min ) IPM
Spindle Speed min -1
Number of Teeth
600
(15,000)
(32,400) 1,275 450 (11,400)
18,000
18
400
(10,000)
Comp's
9,500
12
200
(5,000)
H
0
Drastically Reduced Runout Adjustment Time
Comp's
● Simple screw-fastening structure ● Enables fine adjustments to be made easily ● High-rigidity body
Insert Clamp Screw Adjustment Screw
Runout Adjustment Time (5μm or less)
Adjustment: 1st Time
(ø100mm, 18 Flutes)
Comp's (ø100mm, 12 Flutes)
Adjustment: 1st Time
2nd Time
3rd Time
0
10
20
30
40 (min)
1st Time Completed, Adjustment Time Reduced
Chip Control
Coolant Through Inserts Chip Breaking
Part Material: ADC12 Cutting conditions: v c = 2,500m/min , f z = 0.05mm/t , a p = 0.5mm Wet Competitor: v c = 8,200 SFM, f z = 0.002 IPT, a p = 0.02"
.118”
3mm
.118”
3mm
Competitor's
4 times the efficiency and 9 times the tool life
Coolant Through Inserts
Efficiency
Tool life
550 (14,080)
100,000
600
(15,000)
■ Application Examples
90,000
80,000
400
(10,000)
Machine: Vertical Machining Center BT30, Part Material: ADC12 Automotive Component Tool: ANXA 16125R22 (ø125, 22 teeth, aluminum alloy body *Total weight with arbor 1.75kg) Insert: ANB 1600R-G (DA1000) Cutting conditions: v c = 10,300 SFM ( 3,142m/min) , v f = 554 IPM ( 14,080mm/min) , a p = .031" ( 0.8mm) Wet Machine: Vertical Machining Center HSK63, Part Material: ADC12 Cylinder Head Tool: ANXS 16063RS12 (ø63, 12 teeth, steel body) Insert: ANB 1600R-G (DA1000) Cutting conditions: v c = 5,200 SFM ( 1,583m/min ), v f = 250 IPM ( 6,432mm/min) , a p = .02" ( 0.5mm ) Wet ¢ Precautions when Using Wiper Blades
60,000
4x
9x
40,000
200
(5,000)
3,520
20,000
10,000
0
0
Comp's
Comp's
2 times the efficiency and 2.3 times the tool life
Efficiency
Tool life
(8,000) 320
30,000
28,000
250 (6,432)
240
(6,000)
2.3x
20,000
2x
160
(4,000)
3,200
12,000
10,000
80
(2,000)
0
0
Comp's
Comp's
· W type Setting
· WS type Setting
Precautions (For more details, refer to the instruction manual included with the product) In order to maintain cutter balance when using the WS type (SCV10 wiper blade), use a cutter with an even-number of cutting teeth and place another WS type wiper blade (or dummy blade ANBD) at opposite teeth positions. * The dummy blade is dedicated for use with WS type.
Precautions In order to maintain cutter balance when using the W type wiper blade, use a cutter with an even- number of cutting teeth and place another W type wiper blade at the opposite teeth position.
L G GX H
WS
0.54mm
DC 1.0mm
H214
DCX
Made with FlippingBook flipbook maker