Cutter for QC System Applicable Cutters ■ Two-Piece Cutter with Centre Bolt ● Appearance
■ Quick-F QF Cutter Specifications
4-ø3 Spring Pin
SNT2
D2
DBC1
12
8
H
7
Dimensions (mm)
CBDP
● Adapter Specifications
Dia. Bolt Bolt Diameter Hole position Hole position Key Groove Width Mounting Depth DCB D2 D3 D4 DBC1 DBC2 SNT2 CBDP 31.75 22 43.75 43.5 37.75 55 20 24 38.10 29 50.10 49.8 44.10 55 22 22 50.80 41 62.80 62.5 56.80 68 26 22
Cutter Size (mm)
ø101.6 BDX ø177.8
ø100 ø125 ø160
DCB 25.4
ø18
D2
This design applies to all F type high-feed cutters ( → H234 to H237). Conventional cutter can be easily adapted to quick change through slight modification.
Cutter Setting
■ QAD Cutter (Two-Piece) Specifications
D1
ø26
DMM
DBC
DBC
Cutter Removal
D2
Dimensions (mm)
Shank Max. O.D. Bore Dia. Bolt Bolt Hole Position Cutter Size (mm) DMM BDX DCB D1 D2 DBC
Cat. No.
NQAD 200 105 180 47.625
155 ø200
— — — —
250 155 240 47.625 205 ø250 315 220 305 47.625 32 22 270 ø315 355 260 345 63.50 32 22 310 ø355 400 305 390 63.50 32 22 355 ø400 450 355 440 63.50 32 22 405 ø450 ● Features and Applications (1) With one clamping bolt, the total weight of the two-piece cutter is lighter. (2) Cutter can be replaced quickly - simply turn one bolt halfway to mount and remove. (3) A tapered spline system is used to connect the adapter to the cutter. (4) Can be used for cutters over ø200.
DCB
D1
DC
Dimensions (mm)
Cutter Size (mm)
Dia. Bore Dia. Bolt Bolt Hole Position Height Bolt Count DC DCB D1 D2 DBC LF
Adapter Cat. No.
200 80 250 120 315 180 355 220 400 250 450 300
ø200 ø250 ø315 ø355 ø400 ø450
24 14 120 40 4 QAD200 30 18 170 40 4 QAD250 30 18 230 40 6 QAD315 30 18 270 40 6 QAD355 30 18 300 40 8 QAD400 30 18 350 40 8 QAD450
This design applies to the 2-piece type high-feed cutters.
● Cutter Mounting Diagram
■ NQAD Cutter (Two-Piece with Center Bolt) Specifications
DBC DCB
DC
Dimensions (mm)
Dia. Bore Dia.Hole Position DC DCB DBC
Cutter Size (mm)
Adapter Cat. No.
200 105 250 155 315 220 355 260 400 305 450 355
ø200 ø250 ø315 ø355 ø400 ø450
155 NQAD200 205 NQAD250 270 NQAD315 310 NQAD355 355 NQAD400
405 NQAD450 This design applies to all two-piece type high feed cutters with a center bolt.
H252
Made with FlippingBook flipbook maker