Smart Dampers for Internal Boring
Screw-on, Internal Coolant Supply Internal Diameter
Internal Coolant
95˚
95˚
SCLC Bottom Facing
DMIN Min. Bore Dia.
Fig 1
LF
GAMF
0°
E
Indexable Heads (For Positive Inserts)
Parts
Dimensions ( mm )
C
Flat Insert Screw Wrench
Applicable Insert
Stock
Smart Damper Group No.
Min. Bore Dia.
Overall Length
Cutting Edge Distance
Rake Angle
Diameter
Cat. No.
Fig
Ref. Page
R L
Cat. No.
N m
DMIN DCON LF WF GAMF
(For Torx Holes)
D
SDB32-SCLC R/L09T3-40 SDB40-SCLC R/L09T3-50
40 32 25 22 -4° 50 40 25 27 -2°
1 1 2 1
CC ¨¨ 32.5 B78
BFTX0409N 3.4 TRX15
Right-handed (R) tool holders are compatible with left-handed (L) or neutral (N) inserts. Left-handed (L) tool holders are compatible with right-handed (R) or neutral (N) inserts. *Refer to Smart Damper body Group Nos. on E11 for applicable Smart Damper bodies.
R
Screw-on, Internal Coolant Supply Internal Diameter
Internal Coolant
95˚
S
SCLP Bottom Facing 95˚
DMIN Min. Bore Dia.
Fig 1
T
LF
GAMF
5°
V
W
Indexable Heads (For Positive Inserts)
Parts
Dimensions ( mm )
Flat Insert Screw Wrench
Applicable Insert
Stock
Smart Damper Group No.
Min. Bore Dia.
Overall Length
Cutting Edge Distance
Rake Angle
Diameter
Cat. No.
Fig
Ref. Page
R L
Cat. No.
N m
DMIN DCON LF WF GAMF
(For Torx Holes)
SDB32-SCLP R/L0903-40 SDB40-SCLP R/L0903-50
40 32 25 22 0° 50 40 25 27 0°
1 1 2 1
CP ¨¨ 32.5 ¨ B84
BFTX0409N 3.4 TRX15
Right-handed (R) tool holders are compatible with left-handed (L) or neutral (N) inserts. Left-handed (L) tool holders are compatible with right-handed (R) or neutral (N) inserts. *Refer to Smart Damper body Group Nos. on E11 for applicable Smart Damper bodies.
*Smart Damper TM is a registered trademark of BIG DAISHOWA Co., Ltd.
E 78
N m Recommended Tightening Torque (N·m) : WWW (Worldwide Warehouse Item)
Made with FlippingBook flipbook maker