Smart Dampers for Internal Boring
Screw-on, Internal Coolant Supply Internal Diameter
Internal Coolant
93˚
SDUC Profiling
DMIN Min. Bore Dia.
Fig 1
LF
GAMF
0°
E
Indexable Heads (For Positive Inserts)
Parts
Dimensions ( mm )
C
Flat Insert Screw Wrench
Applicable Insert
Stock
Smart Damper Group No.
Min. Bore Dia.
Overall Length
Cutting Edge Distance
Rake Angle
Diameter
Cat. No.
Fig
Ref. Page
R L
Cat. No.
N m
DMIN DCON LF WF GAMF
(For Torx Holes)
D
SDB32-SDUC R/L11T3-40 SDB40-SDUC R/L11T3-50
40 32 25 22 -2°
1 1 2 1
DC ¨¨ 32.5 ¨ B88
BFTX0409N 3.4 TRX15
50 40 25 27
0°
Right-handed (R) tool holders are compatible with left-handed (L) or neutral (N) inserts. Left-handed (L) tool holders are compatible with right-handed (R) or neutral (N) inserts. *Refer to Smart Damper body Group Nos. on E11 for applicable Smart Damper bodies.
R
Screw-on, Internal Coolant Supply Internal Diameter
Internal Coolant
107.5°
S
SDQC Profiling
DMIN Min. Bore Dia.
Fig 1
T
LF
GAMF
0°
V
W
Indexable Heads (For Positive Inserts)
Parts
Dimensions (mm)
Flat Insert Screw Wrench
Applicable Insert
Stock
Smart Damper Group No.
Min. Bore Dia.
Overall Length
Cutting Edge Distance
Rake Angle
Diameter
Cat. No.
Fig
Ref. Page
R L
Cat. No.
N m
DMIN DCON LF WF GAMF
(For Torx Holes)
SDB32-SDQC R/L11T3-40 SDB40-SDQC R/L11T3-50
40 32 32 22 -2°
1 1 2 1
DC ¨¨ 32.5 ¨ B88
BFTX0409N 3.4 TRX15
50 40 32 27
0°
Right-handed (R) tool holders are compatible with left-handed (L) or neutral (N) inserts. Left-handed (L) tool holders are compatible with right-handed (R) or neutral (N) inserts. *Refer to Smart Damper body Group Nos. on E11 for applicable Smart Damper bodies.
*Smart Damper TM is a registered trademark of BIG DAISHOWA Co., Ltd.
E 79
N m Recommended Tightening Torque (N·m) : WWW (Worldwide Warehouse Item)
Made with FlippingBook flipbook maker