Radius Endmills for Exotic Alloys: Anti-vibration Type (Uncoated) SSEHVL 4000-R Type
Ti Alloy / Heat Resistant Alloy
Stainless Steel
Uncoated Carbide
Radius
Flutes
Helix Angle
Side Milling
Groove Finishing
Face Milling
Profiling
Fig 1
Fig 2
APMX
APMX LU
RE +0.02 -0.01
RE +0.02 -0.01
15˚
LF
LF
DC
Tolerance
I
D ≤ 6.0 6.0 < D
-0.028 to -0.043 -0.033 to -0.052
Body
Dimensions ( mm )
Dia. DC
Radius RE
Cutting Edge Length APMX
Neck Length LU
Overall Length LF
Shank Dia. DMM
Cat. No.
Fig
SSEHVL4045-R05 SSEHVL4045-R10 SSEHVL4050-R05 SSEHVL4050-R10 SSEHVL4060-R10 SSEHVL4080-R10 SSEHVL4100-R10 SSEHVL4100-R30 SSEHVL4120-R10 SSEHVL4120-R30 SSEHVL4160-R10 SSEHVL4160-R30
4.5 4.5 5.0 5.0 6.0 8.0
0.5 1.0 0.5 1.0 1.0 1.0 1.0 3.0 1.0 3.0 1.0 3.0
12.0 12.0 13.0 13.0 13.0 19.0 22.0 22.0 26.0 26.0 32.0 32.0
14.5 14.5 15.5 15.5
50 50 60 60 60 80 90 90 90 90
6 6 6 6 6 8
1 1 1 1 2 2 2 2 2 2 2 2
- - - - - - - -
10.0 10.0 12.0 12.0 16.0 16.0
10 10 12 12 16 16
115 115
Grade: EH520
Recommended Cutting Conditions 1. For stable machining, a high-rigidity machine is recommended. 2. Wet machining is recommended for stainless steel and heat-resistant alloy applications. 3. If cutting noise and vibration are present, please change the cutting conditions accordingly. Side Milling
a e
DC
Stainless Steel SUS304,SUS316
DC (mm) Work Material Cutting Conditions
Titanium Alloy Heat-Resistant Alloy
Spindle Speed (min -1 )
Feed Rate (mm/min)
Spindle Speed (min -1 )
Feed Rate (mm/min)
Spindle Speed (min -1 )
Feed Rate (mm/min)
2,300 2,000 1,700 1,300 1,000
4,600 4,100 3,400 2,600 2,100 1,700 1,300
1,600 1,500 1,200
4.5 5.0 6.0 8.0
120 130 130 130 130 110
370 410 400 360 340 300 260
130 150 140 130 110 100 100
900 700 600 500
10.0 12.0 16.0
800 600
90
1.5DC 0.1DC
1.5DC 0.05DC
1.5DC 0.05DC
a p p f
Standard Depth of Cut
Groove Milling
Stainless Steel SUS304,SUS316
DC (mm) Work Material Cutting Conditions
Titanium Alloy Heat-Resistant Alloy
Spindle Speed (min -1 )
Feed Rate (mm/min)
Spindle Speed (min -1 )
Feed Rate (mm/min)
Spindle Speed (min -1 )
Feed Rate (mm/min)
1,800 1,600 1,400 1,000
3,200 2,900 2,400 1,800 1,400 1,200
1,300 1,200 1,000
4.5 5.0 6.0 8.0
50 50 50 50 50 50 40
250 290 290 250 230 210 180
110 120 120
700 600 500 400
90
10.0 12.0 16.0
800 600 500
100
90 80
900
Standard Depth of Cut
0.3DC
0.2DC
0.15DC
a p
I 100
Made with FlippingBook flipbook maker