MOLD FINISH MASTER SUMIBORON Radius Endmills BNBR Type
Recommended Cutting Conditions 1. Use a machine with high rigidity for stable cutting. 2. Non-water soluble cutting oil is recommended. Supply as a mist or external coolant. Take fire prevention precautions to avoid fire hazards caused by sparks igniting during machining or tool breakage. 3. Shorten overhang as much as possible. 4. Adjust cutting conditions as necessary as machine rigidity and other conditions may vary. 5. Depths of cut shown in the table of conditions are maximum depths. Adjust the actual depth of cut to the desired machined surface roughness.
a e
I
Work Material
STAVAX, NAK80, SKD61 (Up to 52HRC)
ELMAX, DC53, SKD11 Modified (Up to 62HRC)
YXR3, SKH (Up to 70HRC)
DC (mm)
RE (mm)
LU (mm)
Spindle Speed (min -1 )
Feed Rate (mm/min)
Spindle Speed (min -1 )
Feed Rate (mm/min)
Spindle Speed (min -1 )
Feed Rate (mm/min)
a p (mm)
a e (mm)
a p (mm)
a e (mm)
a p (mm)
a e (mm)
40,000 40,000 40,000 40,000 40,000 40,000 40,000 40,000 35,000 35,000 35,000 35,000 35,000 35,000 35,000 35,000 26,000 26,000 26,000 26,000 26,000 26,000 20,000 20,000 20,000 20,000
40,000 40,000 40,000 40,000 40,000 40,000 40,000 40,000 35,000 35,000 35,000 35,000 35,000 35,000 35,000 35,000 26,000 26,000 26,000 26,000 26,000 26,000 20,000 20,000 20,000 20,000
40,000 40,000 40,000 40,000 35,000 35,000 35,000 35,000 30,000 30,000 30,000 30,000 30,000 30,000 30,000 30,000 20,000 20,000 20,000 20,000 20,000 20,000 15,000 15,000 15,000 15,000
0.2 0.05 0.5 0.3 0.05 0.5 0.4 0.05 0.5
400 0.005 0.03 500 0.010 0.05 600 0.015 0.1
400 0.005 0.03 500 0.010 0.05 600 0.015 0.1
250 0.005 0.02 300 0.005 0.03
400 0.01
0.05
0.05 0.5
0.02 0.15 0.02 0.1
0.02 0.02
0.15
0.1
0.05
1.5
0.1
0.1
0.5
600
600
400 0.01
0.05
0.05
2.5
0.01 0.05
0.01
0.05
0.1
0.05
0.1 0.2 0.3 0.1 0.2 0.3 0.1 0.2 0.3 0.1 0.2 0.3 0.1 0.2 0.3 0.5
3.0
0.03 0.3
800 0.03
0.2
600 0.01
0.1
1.0
800
0.05
5.0
0.02 0.2
800 0.02
0.1
600 0.01
0.1
4.5
0.03 0.5
800 0.03
0.3
600 0.02
0.3
1.5
800
7.5
0.03 0.5
800 0.03
0.3
600 0.02
0.3
2.0
6.0
800 0.03 0.7
800 0.03
0.7
600 0.03
0.7
I 105
Made with FlippingBook flipbook maker