GSX MILL Ballnose Endmills GSXB 20000 Type
Recommended Cutting Conditions 1. If cutting noise and vibration occur, please reduce the cutting conditions accordingly. 2. If the machine cannot achieve the recommended spindle speed, please use the maximum spindle speed available.
p f
Radius Milling
Carbon Steel / Alloy Steel (Below 25HRC)
Carbon Steel / Alloy Steel (Below 50HRC)
Cast Iron Special Cast Iron
Stainless Steel Titanium Alloy
Work Material
Cutting Conditions RE (mm)
I
Spindle Speed (min -1 )
Feed Rate (mm/min)
Spindle Speed (min -1 )
Feed Rate (mm/min)
Spindle Speed (min -1 )
Feed Rate (mm/min)
Spindle Speed (min -1 )
Feed Rate (mm/min)
50,000 50,000 50,000 35,000 27,500 22,500 19,000 17,000 15,500 14,000 12,500 11,000 9,000 7,500 6,400 5,600 5,000 4,500
2,100 2,500 3,000 3,000 3,000 3,000 3,000 3,800 4,300 4,700 4,200 3,500 2,800 2,400 2,100 1,800 1,600 1,450
35,000 35,000 35,000 24,000 19,000 15,500 13,000 12,000 11,000 10,500 9,000 7,900 6,300 5,200 4,500 3,900 3,500 3,100
1,150 1,350 1,600 1,650 1,700 1,700 1,700 2,100 2,200 2,500 2,100 1,900 1,500 1,250 1,100
50,000 50,000 50,000 35,000 35,000 28,000 24,000 20,000 18,000 16,500 14,000 12,500 10,500 8,700 7,400 6,500 5,800 5,200
2,100 2,500 3,000 3,200 3,900 3,900 3,900 4,100 4,600 5,300 4,500 4,000 3,300 2,800 2,400 2,100 1,900 1,700
50,000 50,000 50,000 34,000 26,000 21,000 17,500 15,000 12,000 10,500 9,000 7,800 6,300 5,200 4,500 3,900 3,500 3,150
1,750 2,100 2,500 2,500 2,500 2,500 2,500 2,700 2,500 2,500 2,200 1,900 1,500 1,250 1,100
0.20 0.30 0.50 0.75 1.00 1.25 1.50 2.00 2.50 3.00 3.50 4.00 5.00 6.00 7.00 8.00
950 850 750
950 850 750
9.00 10.00
a p p f
0.02DC 0.05DC
0.02DC 0.05DC
0.02DC 0.05DC
0.02DC 0.05DC
Standard Depth of Cut
I 107
Made with FlippingBook flipbook maker