AURORA Coat Long Neck Ballnose SNB2 Type
Recommended Cutting Conditions 1. For radius processing, reduce the feed to half the recommended feed. 2. Non-water soluble cutting oil is recommended. 3. Because of the high spindle speeds, runout of the endmill when mounted should be less than 10 μm.
p f
Side Milling
Work Material Cutting Conditions
Copper Alloy
I
Standard depth of cut (mm) a p a e
Spindle Speed (min -1 )
Feed Rate (mm/min)
Cat. No.
SNB200050034DL 20,000 -50,000 SNB200050064DL
90 0.005 0.005 80 0.005 0.005 350 0.01 0.02 350 0.007 0.015 200 0.005 0.005 400 0.015 0.025 400 0.01 0.02 300 0.007 0.01 250 0.005 0.008 800 0.025 0.05 700 0.02 0.03 600 0.015 0.02 400 0.007 0.015
SNB200100054DL SNB200100104DL SNB200100204DL SNB200150054DL SNB200150104DL SNB300150204DL SNB200150304DL SNB200200104DL SNB200200204DL SNB200200304DL SNB200200404DL SNB200250104DL SNB200250204DL SNB200250304DL SNB200250404DL SNB200300204DL SNB200300304DL SNB200300404DL SNB200300504DL SNB200300604DL SNB200500304DL SNB200500404DL SNB200500604DL SNB200500804DL SNB200501004DL
20,000 -50,000
20,000 -50,000
20,000 -30,000
1,000
0.04 0.07
800 0.03 0.06 700 0.02 0.05 600 0.015 0.04
20,000 -30,000
1,400 1,200 1,000
0.05 0.15 0.04 0.1 0.03 0.07
20,000 -30,000
700 0.03 0.06 600 0.015 0.03
3,500 3,000 2,500 2,000 1,200
0.2
0.4
0.15 0.4 0.13 0.3 0.07 0.15 0.04 0.07 0.25 0.4 0.15 0.4
20,000 -30,000
SNB200750304DL 20,000 4,000 SNB200750604DL 20,000 3,200 SNB200751004DL 20,000 2,000 SNB201000304DL 16,000 4,500 SNB201000604DL 16,000 3,500 SNB201001004DL 16,000 3,000 SNB201001504DL 12,000 2,000 SNB201002004DL 10,000 1,500 SNB202001606DL 16,000 4,000 SNB202002006DL 16,000 3,500 SNB202003006DL 12,000 3,000
0.1 0.4
0.3 0.6
0.35 0.6 0.25 0.4 0.15 0.3
0.1 0.4 0.4 0.2
0.2 0.8 0.8 0.4
I 111
Made with FlippingBook flipbook maker