Corner Radius & Ballnose Endmill Selection Guide
¥ : 1st Recommendation, ¥ : 2nd Recommendation, ¡ : Good, Blank: Not recommended, × : Unsuitable
Material
P
H M S K N
Series Name / Series Code
Applications / Features
Diameter DC (Min. to Max.)
Appearance
I
inch ( mm )
General Endmilling with Corner Radius High Efficiency Endmill with Corner Radius
GSX MILL Radius GSX 40000-R
ø3 to 12
¥ ¥ ¥ ¥ ¥ ¥ ¥ ¡ ¡
GSV Anti-vibration Radius GSV 4000-R SSEH Anti-vibration Radius SSEHVL 4000-R
ø3 to 25
¡¥¥¥¥¥¡ ¥¡¡
ø4.5 to 16
¡ ¥
Exotic Material
SSEH Radius SSEH 4000-R
ø4.5 to 16
¡ ¥
MOLD FINISH MASTER SUMIBORON Radius Endmills BNBR
High-precision Mold Profiling ø0.2 to 2
× ×
¡ ¡ ¥ ¥
Cemented Carbide and Hard Brittle Material
MOLD FINISH MASTER SUMIDIA BINDERLESS Radius Endmills NPDRS
ø0.2 to 2
Cemented Carbide
Hard Brittle Material
¥
¡
¥ : 1st Recommendation. ¥ : 2nd Recommendation, ¡ : Good, Blank: Not recommended, × : Unsuitable
Material
P
H M S K N
Series Name / Series Code
Ballnose Radius (Min. to Max.) / Tolerance inch ( mm ) R0.2 to 10 .0625-1.00" ± 0.01
Applications / Features
Appearance
GSXMILL Ballnose GSXB
General- purpose Aluminum and Non-Ferrous Metal
¥¥¥¥¥¥¡ ¥¡¡
DLC - AURORA Coat Ballnose SNB 2000DL
R1 to 8 ± 0.01
¥ ¥
AURORA Coat Long Neck Ballnose Endmills SNB2
R0.05 to 2 ± 0.005 R0.1 to 0.5 ± 0.005 R0.2 to 1 ± 0.005
¥ ¥
Copper Electrodes
MOLD FINISH MASTER SUMIBORON Ballnose Endmills BNBC MOLD FINISH MASTER SUMIBORON Ballnose Endmills BNBP
¥
High- precision Mold Profiling
× ×
¡ ¡ ¥ ¥
R0.1 to 1 MOLD FINISH MASTER
SUMIDIA BINDERLESS Ballnose Endmills NPDBS (For Standard Finishing)
Cemented Carbide
Hard Brittle Material
¥
¡
Cemented Carbide and Hard Brittle Material
R0.1 to 1 MOLD FINISH MASTER SUMIDIA BINDERLESS Ballnose Endmills NPDB (For Precision Finishing) R0.5 to 1 SUMIDIA Coat Ballnose Endmills SDCB
Cemented Carbide
Hard Brittle Material
¥
¡
Cemented Carbide
Hard Brittle Material
¥
¡
I 3
Made with FlippingBook flipbook maker