GSX MILL 4 Flute Endmills Anti-vibration Type GSXVL 4000S-2.5D Type
Recommended Cutting Conditions 1. For stable machining performance use rigid, high-precision machines and holders. 2. Use air blow when dry machining. 3. Use wet machining for stainless steel, heat-resistant alloy, and titanium alloy applications. 4. If the machine cannot achieve the recommended spindle speed, please use the maximum spindle speed available.
a e
DC
Side Milling
Work Material Cutting Conditions
Carbon Steel, Cast Iron SS, SC, FC (150 to 250HB)
Alloy Steel SCM (25 to 35HRC)
Tempered Steel / Hardened Steel NAK, HPM (40 to 50HRC)
Stainless Steel SUS304,SUS316
I
Titanium Alloy
Spindle Speed (min -1 )
Feed Rate (mm/min)
Spindle Speed (min -1 )
Feed Rate (mm/min)
Spindle Speed (min -1 )
Feed Rate (mm/min)
Spindle Speed (min -1 )
Feed Rate (mm/min)
Spindle Speed (min -1 )
Feed Rate (mm/min)
DC (mm)
3,500 1,400 3,000 1,200 2,200 3,000 1,200 2,600 1,100 1,800 2,700 1,100 2,200 1,000 1,600
1,900 1,600 1,400 1,300 1,100
1,100
12.0 14.0 16.0 18.0 20.0 25.0
700 600 600 570 550 450
550 500 480 450 400
180
900 150 760 130 680 120 600 100 480 82
2,400 1,000 2,000
1,400 1,200 1,000
900 800 630
2,200 1,700
1,700 1,400
900 680
890 310
1.5DC 0.05DC
a p a e
Standard Depth of Cut
0.2DC
0.1DC
0.05DC
Groove Milling
Work Material Cutting Conditions
Carbon Steel, Cast Iron SS, SC, FC (150 to 250HB)
Alloy Steel SCM (25 to 35HRC)
Tempered Steel / Hardened Steel NAK, HPM (40 to 50HRC)
Stainless Steel SUS304,SUS316
Titanium Alloy
Spindle Speed (min -1 )
Feed Rate (mm/min)
Spindle Speed (min -1 )
Feed Rate (mm/min)
Spindle Speed (min -1 )
Feed Rate (mm/min)
Spindle Speed (min -1 )
Feed Rate (mm/min)
Spindle Speed (min -1 )
Feed Rate (mm/min)
DC (mm)
3,100 2,600 2,300 2,000 1,900 1,500
2,000 1,700 1,500 1,300 1,200 1,000
1,700 1,500 1,300 1,100 1,000
1,300 1,100 1,000
12.0 14.0 16.0 18.0 20.0 25.0
920 750 670 620 600 470
500 450 420 380 360 300
450 400 350 330 320
280 250 230 200 180
660 570 500 430 380
110 100
90 80 70
900 800
790 250
640 140
300 55
Standard Depth of Cut
1.0DC
0.2DC
0.5DC
0.2DC
a p
I 79
Made with FlippingBook flipbook maker