HSK Tooling System
HSK T ooling S ystem are made to order items
General External Turning and Profiling Double Clamp
External Turning and Profiling DTR
Fig 1
LF 95°30'
Insert
(Representative example)
Applicable Insert Cat. No. Ref. Page TRM5517 SS C28
G
TRM551708-LU
Parts
Holder
Dimensions ( mm )
Clamp Plate
Shim Screw
Wrench for Shim
Spring Cap Screw Shim
Wrench
Overhang Cutting Edge
Cat. No.
Previous Cat. No.
Fig
N m
LF WF
3.5 to 4.5
HSK63TH-DTR55C R-DX17 H63A-WH-DTR55C R-DX17 *Wrench for shim is sold separately from the main body. Refer to TRM series inserts on C28 for applicable inserts.
65 45
1 TRCP3 S-SP4-20 BX0520
TRW5505 BFTX0307N TSW040 TRX10(*)
External Grooving Double Clamp
External Grooving GWC
Fig 1
LF
Insert
(Representative example)
Applicable Insert Cat. No. Ref. Page TGAR4 SSS ¨ F45 TGAR4 SSS BF F47
TGAR4150
Parts
Holder
Dimensions ( mm )
Flat Insert Screw
Clamp Plate
Double Screw
Wrench Wrench
Cutting Edge
Width of Cut
Overhang
Group No.
Cat. No.
Previous Cat. No.
Fig
N m
LF
WF
CW
HSK63TH-GWC R-DX412 H63A-WH-GWC R-DX412 HSK63TH-GWC R-DX415 H63A-WH-GWC R-DX415 HSK63TH-GWC R-DX425 H63A-WH-GWC R-DX425
65 65
45 1.25 to 1.45 2 1 45 1.50 to 2.30 3 1
BFTX0511N 5.0 CCM8UL WB8-22T TRX20 LT27
65 45 2.50 to 4.80 4 1 Refer to TGA series insert group numbers on F45, F46 and F47 for applicable inserts. Select applicable inserts for the holders by using matching group numbers.
G6
N m Recommended Tightening Torque (N·m)
Made with FlippingBook flipbook maker