MultiDrill Series MDM Type
Experience exceptional stability when machining stainless steel and exotic alloys!
ACT70
NX coating
Carbide Substrate & Coating ideal for machining stainless steel and exotic alloy.
J
Highly Adhesive Coating Layer TiAlCrSi Super Multi-Layer Hardness HV: 46GPa Oxidation starting temperature: 1,100°C
D NX coating reduces wear at the margin and resists edge chipping.
MDM
MDM
Conventional
Conventional
Part Material: 304 Stainless Steel, Machine: BT30 vertical M/C Tool: MDM0800S08H05 ( ø8.0 mm × 5D) Cutting Conditions: vc = 265 SFM, f = .0079 IPR, H = 1.57” (through hole) Internal Coolant supply (Water Soluble)
D Reduced thrust enables stable machining from the top of the hole to the bottom
MDM
Competitor
1,200 1,600 2,000 2,400 2,800
0 400 800
Stable
Unstable at the top of the hole
Part Material: 304 Stainless Steel, Machine: BT30 vertical M/C Tool: MDM0800S08H05 ( ø8.0 mm × 5D) Cutting Conditions: vc = 265 SFM,
f = .0079 IPR, H = 1.57” (through hole)
Internal Coolant Supply (Water Soluble)
J34
Made with FlippingBook flipbook maker