Dogma
DOGMA
Dogma è una struttura a telaio per pannelli. I profili sono pensati per contenere dei pannelli ancorandosi alle estemità. Permettono di creare boiserie di dimensioni generose e capaci di sostenere il peso dei pannelli così come anche di accessori applicati sopra. Dogma is a frame structure for panels. The profiles are designed to hold panels by anchoring themselves to the ends. They allow you to create generously sized paneling capable of supporting the weight of the panels as well as any accessories applied on top.
Profilo laterale con parapolvere per compensazione e lampada LED Side profile with dust cover for compensation and LED lamp
23,7
36,8
DK01
23,5
Profilo centrale Intermediate profile
36,8
DK02
Lavorazione e specifiche pannello/ Panel machining and specifications
L
12
2,5
7 3
S
L = dimensione pannello in altezza o larghezza/ panel size in height or width S = spessore pannello da 18 a 25mm/ panel thickness from 18 to 25 mm
2
– Dogma –
La struttura viene fissata con le staffe KC50KIT-S e KC50KIT-SL, le prime devono essere utilizzate nei profili DK01, da cui iniziamo la posa, inferiore e destro o sinistro. E nella parte in cui non è acorato il pannello dei profili centrali, DK02. KC50KIT-SL si usa nei profili perimetrali che completano la struttura o in quelli intemedi che richiedono un fissaggio anche nella parte che sarà coperta dal pannello. The structure is secured using KC50KIT-S and KC50KIT-SL brackets. The former must be used in DK01 profiles, where we begin installation, at the bottom and on the right or left. In the part where the central profile panel is not secured, DK02. KC50KIT-SL is used in the perimeter profiles that complete the structure or in the intermediate ones that also require fastening in the part that will be covered by the panel.
KC50KIT-SL
KC50KIT-SL
KC50KIT-S
KC50KIT-S
3
– Dogma –
Guida di montaggio/ Assembly guide
Posa profili di partenza Installation of starting profiles 1
Installare 2 profili laterali, inferiore e destro o sinistro/ Fastening 2 side profiles, lower and left or right
Lunghezza montante verticale/ Vertical upright lenght = altezza tot pannelli/ tot. panels height (ATP) - 10 mm
Utilizzare la dima per tracciare la posizione fori/ Use the template to mark out the hole positions
5
ATP
5
DK01
Lunghezza montante orizzontale/ Horizontal upright lenght= larghezza tot. pannelli/ tot. panels width (LTP) - 48 mm
Tracciare la posizione fori sugli altri 2 lati e predisporre il montaggio della base/ Mark the hole locations on the other two sides and prepare to install the base Art. KC50KIT-SL
24
24
LTP
Inserire la guarnizione (opzionale)/ Insert the gasket (optional) art. DK01.GU
2
Posa profili intermedi Installation of middle profiles
Lunghezza montante verticale/ Vertical upright lenght = altezza pannello/ panel height (AP) - 36 mm
Installare i profili centrali orizzontali/ Fixing horizontal middle profile
Lunghezza montante orizzontale/ Horizontal upright lenght = larghezza tot. pannelli/ tot. panel width (LTP) - (48) 50 mm
Installare i profili centrali verticali/ Fixing vertical middle profile
12
DK02
AP
24
24
LTP
24
Utilizzare la dima per tracciare la posizione fori Use the template to mark out the hole positions
Utilizzare la dima per tracciare la posizione fori Use the template to mark out the hole positions
3
Posa profili terminali Installation terminal profiles
Avvitare i tappi alle estremità/ Screw the caps onto the ends
Inserire ad incastro il profilo laterale mancante e quello superiore/ Snap the missing side profile and the top profile into place
4
– Dogma –
DK02
DK01
Profilo centrale Intermediate profile
Profilo laterale dogato Side profile
KC50KIT-S
KC50KIT-S
KC50KIT-SL
5
– Dogma –
Metalika Srl 31048 San Biagio di Callalta (TV) 0422 980174
info@metalika.it www.metalika.it
6
– Dogma –
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6Made with FlippingBook - professional solution for displaying marketing and sales documents online