HAV GUIDE
Hand Arm Vibration Syndrome (HAVS) describes the permanent health conditions that e ect the hands when exposed to prolonged vibration when using power tools. The syndrome is a debilitating disease that causes permanent damage to nerves, blood vessels, muscles and joints of the hand, wrist and arm. A loss of strength, dexterity and feeling in the hands will occur, meaning simple everyday tasks such as doing up buttons or counting coins will become dicult. HAVS can also reduce quality of life as sports and hobbies such as angling, darts, golf, DIY or gardening become more almost impossible.
EARLY SYMPTOMS Tingling or numbing sensation in the fingers Loss of strength and reduced grip Loss of precision in the hands Fingertips turning white and/or red Muscle spasms Painful hands or fingers in cold weather If you experience any of the above symptoms, it is vital that you cease using any vibratory power tools and contact your GP immediately.
Can someone aicted with HAVS be cured? Simply put, no. Once the damaging e ects of HAVS has onset, it is impossible to reverse. This makes it imperative that operators and employers are fully educated on the risks involved in using vibratory power tools. The good news, however, is that HAVS is entirely preventable, if operators and employers take the necessary preventative measures.
SUSCEPTIBLE TOOLS
Road Breakers Hammer Drills Rock Drills Impact Wrenches
Chipping Hammers Demolition Hammers Rammers Plate Compactors
Chainsaws Reciprocating Saws Concrete Pokers Scabblers
Brushcutters Angle Grinders Cut O Saws Needle Scalers
The Health and Safety Executive (HSE) estimates that two million workers are exposed to the risks of HAVS throughout the UK. Any worker, ranging from construction workers to gardeners, who use vibratory power tools regularly, may be at risk. While there is no definite list of industries or tools that are directly responsible, it is worth noting that even the most susceptible industries, such as roadworking or utilities, can eliminate the risks if properly managed.
INDUSTRIES AT RISK Construction Road and Rail Civils Manufacturing Plants Forestry Mining Landscaping Utilities Fabricators Engineering Foundries Shipbuilders Quarrying Mechanics
Employers have a legal obligation to ensure that exposure to vibration is minimised for their employees using power tools and that the risks of vibration are suitably measured and controlled. Employers must also ensure relevant training, awareness and information is provided to their employees on the risks and subsequent actions being taken to control the risks of harmful vibrations. Suitable health surveillance must be provided to measure the daily exposure action values and exposure limit values being actively monitored. Exposure Action Value: EAV acts as a warning level, indicating that daily vibration levels experienced by the operator are approaching dangerous levels and precautions must be taken to reduce or stop vibration. Exposure Limit Value: ELV indicates daily exposure levels have been exceeded and the operator must cease using the tool immediately.
5. Make sta welfare a priority: Ensuring that sta have suitable clothing and welfare options, such as GAP’s AutoHybrid Welfare Units, is essential for keeping sta warm and dry. Cold, wet hands is the primary defining danger for an operator for the onset of HAVS. When the body and limbs get cold, blood is diverted to the core to heat vital organs, resulting in a loss of temperature and blood circulation to the fingers and hands. If the nerves and blood vessels are expossed to vibration in this state, the damage inflicted will greatly increase. 4. Keep your tools maintained: It is vital that vibratory power tools are serviced regularly to ensure that all components work eciently, there are no loose parts and tools are well lubricated. All power tools eventually succumb to wear and tear, and tools in poor condition can vibrate excessively higher than normal levels. 3. Hire low vibration tools: When it comes to HAVS, and ultimately peoples safety, invest in options such as Active Vibration Reduction (AVR) by Hilti or Makita’s AVT (Anti-Vibration Technology). Not only will these tools greatly reduce the dangers of HAVS, these models boost onsite productivity as sta can operate tools for longer periods before ELA or AVL values are reached. 1. Change working processes: Quite simply, the easiest way to control the dangers of HAVS is to eliminate and minimise the requirement of using vibratory power tools altogether. For example, can an excavator with a breaker attachment be used rather than roadworkers using handheld breakers? Can remote control technology be used to remove HAV risks? 2. Plan tool use schedules: Site managers can plan working schedules using vibratory tools over longer periods of time, allowing for shorter working intervals using the tools to avoid periods of prolonged use. This allows the blood circulation to return to the soft tissue in the hands. EMPLOYER ACTIONS Measuring the vibration levels absorbed by the operator of power tools is not an exact science. It is important to note there are varying elements that can eect the vibration absorption rate of an individual, with each operator experiencing dierent levels of vibration for identical scenarios. Factors such as muscle mass, circulation, terrain, weather and even stress can alter the intensity of vibratory energy experienced by an operators body.
1. Get the gloves on: Keeping the hands warm and dry is essential for healthy blood circulation to the hands and fingers. Gloves also act as a dampener between the tool and the hands, reducing the vibratory energy absorbed by the hands. Not to be used as a permanent HAVS reducing solution. OPERATOR ACTIONS
4. Get the form right: When using vibratory tools the operators stance and grip is critical to safe working. If the operator is overstretched, the tool is overhead or compressed close the body, this is not only a slip danger, it makes the stance rigid. This results in tension on the muscles, making them more susceptible to vibration damage. Applying excess force to a tool, such as pressing down on a road breaker, puts excess stress on the tool which will increase vibration. Locking the arms or legs can often put stress on the joints and nerves, causing issues such as carpol tunnel syndrome. Overgripping tools puts muscle under tension, making them more susceptible to vibration damage. Just remember, keep a relatively relaxed grip and let the tool do the work! 3. Select the right tool for the job: With many tools capable of drilling, cutting and grinding varying materials, it is important to select the tool most suited to the task, especially when working for prolonged periods. For example, using a demolition hammer over a combination hammer, or a cut o saw over an angle grinder, will provide a more smoother finish, resulting in reduced working times, and thus reducing exposure. Selecting a larger, more powerful tool also helps reduce time and the vibration experienced. 2. Take regular intervals when using tools: Introducing breaks when using vibratory power tools allows time for blood circulation to return to the hands and fingers. Prolonged exposure to HAVS will increase the intensity of damage done to blood vessels and nerves due to a lack of circulation caused by continous use. Set intervals when using tools by performing other tasks free of vibration.
6. Look after your body: Smoking and drinking alcohol in excess restricts blood circulation and makes the dangers of vibration more likely. By giving up smoking and drinking less you will reduce the risks of HAVS. 5. Keep it sharp: Using blunt or poor quality blades and drill bits can increase vibration levels significantly. Blunt blades and drill bits increase the size of physical contact between the tool and material, putting further pressure on the tool to work harder, and longer, which increases vibration. Higher grade diamond blades and attachments will be made with better quality materials, giving a cleaner, faster result. Ensure blades are installed facing the direction specified by the tool.
5 1/ /CIondrdelxess Tools
CONTENTS
2
CORDLESS TOOLS
15 21 28 38 42 49
BREAKING & DEMOLITION
DRILLING & DIRECT FIXING
SAWING, CUTTING & GRINDING
AIR TOOLS
COMPACTION, CONCRETING & CLEANING
GROUNDCARE & LANDSCAPING
Cordless Tools / 2
CORDLESS TOOLS
5 3/ C/ Co rodrldelses sToTo losl s
ET013
ET012
Cordless Screwdrivers Application: plasterboard fixing
Cordless TEK Screwdrivers Application: metal fixing and self-drilling fastening Materials: steel | aluminium Suited for driving self-drilling and self-tapping screws into a range of materials such as steel, aluminium and wood. TEK screwdrivers are suited for prolonged use when fixing metal sheets, sandwich panels, liner trays and fastening metal profiles.
Materials: plasterboard | wooden boards | metal studs Primarily used for fixing drywall panels, it can also be used to fix wooden boards, specialised boards such as fermacell boards and exterior sheathing boards to wood and metal ceilings and walls. • Can be used with Hilti Autofeed attachment (ET080)
Code
ET013
Code
ET012
Description
Construction Screwdriver (TEK)
Description
Cordless Drywall Screwdriver
Model
Hilti SD 5000-A22
Model
Hilti ST 1800-A
Battery
22V Li-ion
Battery
22V Li-ion
Max Torque HAV Rating Sound Level
22 Nm
Max Torque HAV Rating
10 Nm 1 m/s²
0.5 m/s²
Sound Power Level
Power: 82 dB(A)
Power: 81 dB(A)
Weight
2.7kg
Weight
3.1kg
Cordless Tools / 4
CT005
Cordless Finish Nailers Application: nailing wooden boards and panels Materials: timber
Cordless premium gas driven angled finish nailer for 20-degree angled brads 16-gauge from 32 to 64mm. Can be used for skirting boards, door-stops, stair rails, window casing, beading, tongue and groove panelling and architraves to walls and ceilings. Cordless Fixing Tools Application: direct fastening to materials Materials: concrete | masonry | steel | aluminium The BX3 range offers a highly manoeuvrable and practical option for material fastening on-site. Capable of fastening materials such as steel tracking, plasterboard, trunking and conduits to surfaces such as concrete, masonry and steel. Code CT005 CT020 Description Finishing Nail Gun Cordless Fixing Tool Model Paslode Impulse 65A F16 Hilti BX 3-L Hilti BX 3-ME Battery 7.4V / 2.1Ah Li-ion 22V / (2.6/3.2/5.2)Ah Li-ion Capacity 100 30 nails 20 nails HAV Rating 2.8 m/s² 2.3 m/s² 2.5 m/s² Sound Levels Power: 105 dB(A) Power: 105 dB(A) Power: 100 dB(A) Weight 2kg 3.5kg 3.5kg
Autofeed Screwdrivers Application: repetitive fastening of boards
Autofeed screwdrivers make short work of large-scale fixing tasks on-site. The Autofeed magazine feeds the screws automatically after each fastening, allowing for extremely fast and efficient work-flow on drywall and metal fixings. Code ET080 Description Autofeed Screwdriver Model Hilti SMD 57 (includes screwdriver) Makita DFR550RMJ Screw Capacity 50 45 HAV Rating 1 m/s² 2.5 m/s² Sound Levels Power: 82 dB(A) Pressure: 78 dB(A) Weight 3.03kg 3.1kg
5 / Cordless Tools
Cordless Drill Drivers Application: drilling and driving Materials: wood | masonry | metal | plasterboard | plastic
ET092
Lightweight and highly mobile, cordless drill drivers are a popular ‘all- rounder’ on-site capable of both drilling and fastening applications. Compact in design, these are ideal in both hard to reach and overhead spaces. LED task light on all models allows for added illumination.
Code
ET092
ET097 / ET084 22V Cordless Drill Driver
Description
Cordless 18V Drill Driver
Hilti SF 6H-22A (with ATC)
Model
Makita DHP481RTJ
Makita DHP482RMJ
Battery
18V Li-ion
22V Li-ion
Shank Size Max torque
1.5 - 13mm
1.5 - 13mm
2 - 13mm
60Nm / 115Nm Metal: 2.5 m/s²
36Nm / 62Nm
60Nm / 80Nm
2.5 m/s²
2.8 m/s²
HAV Rating
Concrete: 6.5 m/s²
Concrete: 6.5 m/s²
Concrete: 15.5 m/s² Pressure: 91 dB(A)
Sound Level
-
-
Weight
3kg
1.8kg
2.2kg
Cordless Impact Drivers Application: tightening of self-drilling anchors and bolts Materials: masonry | metal | wood
ET127
Ideal for working in mechanical and electrical trades such as securing flanges, assembling steel profiles, timber or precast concrete components and installing anchors in concrete. • Not to be used when a specified torque is required
Code
ET127
ET116
Description
Cordless 1/4” Impact Driver
Cordless 1/2” Impact Driver
Makita DTD154RTJ
Makita DTD152RMJ
Hilti SID 4-A22
Hilti SIW 22T-A
Makita DTW285RMJ
Makita DTW1002RTJ
Model
Battery
18V Li-ion
22V Li-ion
18V Li-ion
Shank Size 13mm (1/2”) Square Max torque 175Nm 165Nm 194Nm 450Nm 280Nm 1000Nm HAV Rating 12.5 m/s² 10.5 m/s² 12 m/s² 14.5 m/s² 11.5 m/s² 18 m/s² Sound Level Power: 96 dB(A) Power: 93 dB(A) Pressure: 87 dB(A) 6.35mm (1/4”) Hex Pressure: 97 dB(A) Pressure: 96 dB(A) Pressure: 97 dB(A)
Weight
1.5kg
1.6kg
3.7kg
1.7kg
3.6kg
Cordless Tools / 6
ET082
ET084
Cordless SDS+ Combi Hammers Application: drilling and light chiselling Materials: concrete | masonry | stone
Designed for prolonged drilling in concrete and masonry, SDS+ drills are a site all-rounder used by most tradesmen. Capable of drilling into masonry and concrete, they also have the ability for light chiselling as a secondary function. All models come with dedicated dust extraction attachments as an additional hire option TE 4-A22 does not include chiselling feature
Code
ET125
ET118
ET082
ET138
Cordless 18V SDS+ Hammer Drill
Description
Cordless 22V SDS+ Hammer Drill
Cordless 36V SDS+ Hammer Drill
Model Makita DHR242RMJ
Hilti TE 4-A22
Hilti TE 6-A22
Hilti TE 6-A36
Makita DHR280ZJ Twin 18V Li-ion Concrete: 28mm Steel: 13mm
Hilti TE 30-A36
Power
18V Li-ion
22V / 5.2Ah Li-ion 22V / 3.0Ah Li-ion
36V / 2.6Ah Li-ion Concrete: 20mm Steel: 13mm
36V / 5.2Ah Li-ion
Max Drilling Depth
Concrete: 24mm Steel: 13mm
Concrete: 16mm Steel: 10mm
Concrete: 20mm Steel: 13mm
Concrete: 28mm
HAV Rating
Drilling:
3.5 m/s² 13.5 m/s² 10.5 m/s²
12.3 m/s²
2.1 m/s²
2.5 m/s²
2.5 m/s²
5 m/s²
Hammer Drilling:
11 m/s²
13.4 m/s² 6.3 m/s²
13 m/s²
9 m/s²
10.6 m/s² 10.3 m/s²
Chiselling:
N/A
-
8.5 m/s²
Sound Level
101 / 90 dB(A)
Power: 99 dB(A)
Power: 100 dB(A)
Power: 102 dB(A)
Power: 104 dB(A)
Power: 103 dB(A)
Weight
3.8kg
3.9kg
3.7kg
3.7kg
4.9kg
5.7kg
7 / Cordless Tools
ET190
ET180
Cordless SDS MAX Combi Hammers Application: heavy-duty drilling and breaking Materials: reinforced concrete | masonry | stone Larger than SDS+ systems, SDS MAX combi hammers offer increased power and performance. Designed for sustained heavy duty concrete drilling, SDS MAX systems can perform multiple applications due to interchangeable drill attachments. Hammer action as a secondary function.
Cordless SDS MAX Demolition Hammers Application: chiselling, chipping and scaling Materials: concrete | masonry | metal (scaling)
With a potent 36V Li-ion performance, cordless demolition hammers combine the mobility of a cordless tool with the breaking capability of a wired demolition hammer, all
without the need for a regular power source. • TE 300 compatible needle scaler option
Code
ET180
ET148
NURO016
Code ET170 NURO015 ET190 NURO015 NURO020
Cordless Rotary Hammer
Description Cordless SDS MAX Combi Hammer
Cordless Rotary Hammer
Cordless Demolition Hammer
Cordless Chipping Hammer
Cordless Breaker
Description
Model
Hilti TE 60-A36 Makita DHR400ZKU Nuron TE 60-22
Hilti Nuron TE 2000- 22
Battery 36V / 9.0Ah Li-ion Twin 18V Li-ion
21.6V
Hilti Nuron TE 60-22
Hilti TE 300-A36
Hilti Nuron TE 500-22
Hilti TE 500-A36
Model
Max Drilling Depth
18 - 40mm
40mm
40mm
36V / 5.2Ah Li-ion
36V / 9.0Ah Li-ion
Impact Energy
8.1J
8.0J
8.1J
Battery
21.6V
21.6V
21.6V
Hammer Drilling: 9.1 m/s²
Hammer Drilling: 10.7 m/s² Chiselling: 9.1 m/s²
Chiselling: 5 m/s²
Impact Energy 3.6J
8.1J
7.8J
8.1J
38.2J
HAV Rating
Chiselling: 7.9 m/s²
Chiselling: 8.7 m/s²
Chiselling: 6.7 m/s²
Chiselling: 9.1 m/s²
Chiselling: 2.7 m/s²
Chiselling: 7.8 m/s² Chiselling: 4 m/s²
HAV Rating
Sounds Levels 109 / 98 dB(A)
102 / 91 dB(A)
106 dB(A)
Sounds Levels Weight
99 / 88 dB(A)
100 / 89 dB(A)
106 dB(A)
106 dB(A)
100 dB (A)
Weight
8.1kg
6.3kg
4.9kg
6kg
7.9kg
6.3kg
17.4 kg
Cordless Tools / 8
SS121
SS063
Cordless Mitre Saws Application: continuous on-site cutting Materials: softwoods | plasterboard
Cordless Reciprocating Saws Application: freehand cutting and demolition
Materials: wood | steel | aluminium | plastic | fibreglass Cordless reciprocating saws are highly portable and allow the user to cut vertically and above shoulder height for prolonged periods. Suitable for roofing and shop fitting applications, these are capable of straight or angled cuts and specialise in pipe cutting and wooden materials. • Particularly useful for free-hand cutting
Easily transported and capable of cutting 45-degrees to either side. Double sliding rails give a smooth, precise cut that requires a small working area, providing extremely fast and efficient wood cutting on-site. Twin 18V batteries match the cutting power and speed as wired versions. • Cuts up to 300mm in a single pass
Code
SS121
SS122
Code
SS063
Description
Cordless Mitre Saw
Description
Cordless Reciprocating Saw
Model
Makita DLS714NZ
Makita DLS110Z
Model
Hilti SR 30-A36 36V / Ah Li-ion
Makita DJR187RTE
Battery
Twin 18V Li-ion
Battery
18V Li-ion
Blade Diameter Max mitre range
190mm 47 - 57° 2.5 m/s²
260mm 60 - 60° 2.5 m/s²
Stroke Length
32mm
Chipboard: 22.5 m/s²
Chipboard: 16.5 m/s²
HAV Rating
HAV Rating
Wooden Beams: 20.5 m/s²
Wood: 15.5 m/s²
Sound Levels
97 / 88 dB(A)
102 / 92 dB(A)
Sound Levels
96 / 85 dB(A)
95 / 84 dB(A)
Weight
13.5kg
27.3kg
Weight
5.2kg
3.8kg
9 / Cordless Tools
SS062
SS049
Cordless Circular Saws Application: precision straight-line cutting
Cordless Jigsaws Application: precision cutting Materials: wood | sheet metal | plastic | laminates
Materials: wood | sheet metal (SS093 only) | laminates Suitable for ripping and cross cutting both softwood and hardwood sheet materials, cordless circular saws can be used for general carpentry work such as cutting rafters to length, cutting tenons and trimming roof battens to length. The SCM 22-A is specially designed for cutting sheet metal and offers a metal chip collector for cold metal cutting. • Height and angle adjustable sole plate
Versatile and mobile, suitable for cutting straight or curved lines in wood, plastic or sheet metal on interior sites. Features a compact and lightweight design with ergonomic rubberised handle and an adjustable base for maximum precision cutting. Code SS049 Description Cordless Jigsaw Model Makita DJV180RMJ Makita DJV182RMJ Hilti SJD 6-A22 Battery 18V Li-ion 22V Li-ion
Code
SS062
SS089 SS093 NURO065
Cordless 7” Circular Wood Saw Hilti SC 70W-A22
Cordless 5” Circular Metal Saw Hilti SCM 22-A 22V Li-ion
Cordless 2” Circular Metal Saw Nuron SC 4WL-22
Cordless 5” Circular Wood Saw
Description
Hilti SCW 22-A
Makita DHS680RMJ
Model
Steel: 10mm | Wood: 135mm Aluminium: 20mm
Steel: 10mm | Wood: 150mm Aluminium: 25mm
Battery 22V Li-ion 18V Li-ion
Steel: 10mm | Wood: 135mm
Max Cutting Depth
Max Cutting Depth Max Blade Diameter HAV Rating (m/s²)
57mm
70mm
57mm
Stroke Length
26mm
28mm
165mm
190-190mm
165mm
Chipboard: 4.8 m/s² Sheet Metal: 4.7 m/s²
Chipboard: 8 m/s²
MDF: 7 m/s²
HAV Rating
Wood: 1.2 Wood: 2.5 Wood: 1.3 Metal: 0.82 Wood: 0.8
Sheet Metal: 3.5 m/s²
Sheet Metal: 3.5 m/s²
Sound Levels Weight
103/93 dB(A)
103/92 dB(A)
104/93 dB(A)
94/83 dB(A)
100 dB(A)
Sound Levels
-- / 78 dB(A)
-- / 77 dB(A)
97.5 dB(A)
4.1kg
3.3kg
4.8kg
4.1kg
3kg
Weight
3kg
2.7kg
3.2kg
Cordless Tools / 10
SS133
ET033
Cordless Cut Off Saws Application: precision straight-line cutting Materials: roof tiles | masonry | metal | paving blocks An innovative and new lightweight tool suited to roofers, capable of being carried up ladders to allow cutting at roof level. Makes short work of roofing tiles, bricks, metal and paving blocks. Emission free, it can be used both indoors and outdoors and comes with dust control compatibility.
Cordless Angle Grinders Application: cutting and grinding Materials: steel | concrete | rebar | masonry | stone Versatile and mobile, cordless angle grinders are all-in-one tools. Swap discs for diverse applications like cutting and grinding steel, mineral-based products, removing coatings on cement and screed. Code ET033 ET200 NURO061 NURO062 Description Cordless Mini Grinder Cordless Grinder Cordless Angle Grinder Model Hilti AG 125- A22 Makita DGA517RTJ Makita DGA900PT2 Hilti Nuron AG 4S-22 Hilti Nuron AG 6D-22
Code
SS133
NURO050
Description Cordless Cut Off Saw
Battery Cut-Off Saw Nuron DSH 600-22
Model
Stihl TSA 230
Battery
22V
Twin 18V Li-ion
21.6 V
Battery
36V / 4.8Ah Li-ion
22V
Disc Diameter Max Cutting Depth
125mm
230mm
125mm
Max Cutting Depth Max Blade Diameter
70mm
120mm 300mm 1.5 m/s²
34mm
22mm
34mm
230mm 3.5 m/s²
HAV Rating
HAV Rating (m/s²)
Grinding: 7.5
Grinding: 5.1
Grinding: 4.2
Grinding: 3.8 Sanding: 2.5
Sound Levels
114 / 103 dB(A)
108 dB(A)
99 / 88 dB(A)
Sound Levels 94 / 83 dB(A) -- / 79 dB(A)
94 dB(A)
Weight
3.9kg
8.5kg
Weight
2.7kg
3.1kg
8kg
2.1kg
2kg
11 / Cordless Tools
ET310
ET139
Cordless Multi Tool Application: sanding Materials: steel | concrete | rebar | masonry | stone Designed as a tool of all trades, multi tools are capable of sanding, scraping, cutting, sawing, grinding, trimming and polishing - due to their compatibility with a range of attachments. • Variable speed control dial
Cordless Power Planers Application: wood trimming and stock removal Materials: wood
Used for fast and accurate stock removal from doors, frames and wooden beams. Can also finish wood to specific widths, giving an accurate and smooth finish. Depth adjustment allows for 0.1mm increments and a V-shaped groove on the baseplate makes chamfer cutting seamless.
Code
ET139
Code
ET310
Description
Cordless Multi Tool
Description
Cordless Power Planer
Model
Makita DTM50Z
Model
Makita DKP180RMJ
Battery
18V Li-ion
Battery
18V Li-ion
Oscillation Angle
3.2°
Planing Depth / Width
2mm | 82mm
HAV Rating
HAV Rating Sound Level
Plaining: 4.5 m/s²
Cutting Metal Cutting Wood
5 m/s²
95 / 84 dB(A)
9.5 m/s² 7.5 m/s² 2.5 m/s²
Weight
3.5kg
Chiselling
Sanding
Sound Levels
95 / 84 dB(A)
Weight
2.2kg
Cordless Tools / 12
ET330
ET320
Cordless Router Application: cutting groves and bevels Materials: wood
Cordless Biscuit Jointer Application: cutting biscuit slots Materials: timber
A cordless tool capable of cutting grooves and rabbets, shaping, bevelling, making profiles and decorative cutting in wood edges and plunged cuts. A common item used in decorative woodworking, cordless routers offer a simple solution to produce decorative mouldings.
A cordless biscuit jointer creates neat and clean slots in wood to prepare for the insertion of wooden biscuits to join wood edges together. Ideal for creating bespoke joinery, commercial cabinets and shelving. • Biscuit dowels available (sizes 0, 10 & 20)
Code
ET320
Description
Cordless Router
Model
Makita DRT50ZX4
Collet Capacity Plunge Capacity
3/8” and 1/4”
Trimmer: 0 - 40mm | Plunge: 0 - 35mm
Code
ET330
HAV Rating Sound Level
Cutting MDF: 4.5 m/s²
Description
Cordless Biscuit Jointer
-- / 78 dB(A)
Model
Makita DPJ180RMJ
Weight
2.1kg
Battery
18V Li-ion
Blade width HAV Rating Sound Levels
4mm
Cutting MDF: 2.5 m/s²
-- / 74 dB(A)
Weight
3.1kg
13 / Cordless Tools
ET300
ET340
Cordless Die Grinder Application: grinding & surface preparation Materials: metal
Cordless Nibbler Application: cutting sheet metal Materials: steel | aluminium
Designed for precision grinding and contouring in tight spots and awkward to reach areas, die grinders allow for rough-deburring and fine grinding of steel and metal materials, giving a smooth, clean finish. Ideal for workshops and engineering applications. • Ideal for edge preparation before welding Code ET300 Description Cordless Die Grinder Model Makita DGD800 Hilti GDG 6-A22 Battery 18V Li-ion 22V Li-ion Collet Capacity 6mm HAV Rating 6.5 m/s² 5 m/s² Sounds Levels -- / 72 dB(A) 83 dB(A) Weight 2.2kg 2.6kg
The manoeuvrable nature of cordless nibblers allows for portable and continuous cutting of trapezoidal, corrugated and rolled sheet metals and profiles.
Code
ET340
Description
Cordless Nibbler Makita DJN161Z
Model
Battery
18V Li-ion
Mild Steel: 1.6mm Stainless Steel: 1.2mm Aluminium: 2.5mm Cutting metal: 6.5 m/s²
Max Cutting Width
HAV Rating
Sound Levels
104 / 93 dB(A)
Weight
2.3kg
Cordless Tools / 14
15 / Breaking and Demolition
37
BREAKING & DEMOLITION
Breaking and Demolition / 16
AT005
AT063
Chipping Hammers Application: light duty handheld demolition Materials: brick | stone | concrete | tarmac
Demolition Hammers Application: heavy duty handheld demolition Materials: brick | stone | concrete | tarmac
Chipping hammers are lightweight demolition hammers capable of overhead work, along with prolonged vertical demolition tasks. Their small size helps you get in close behind pillars and under stairs when doing renovation work. • Integrated automatic lubrication system Code AT005 AT061 Description Chipping Hammer Chipping Hammer (Anti Vib) Model Yokota 5HDH H Atlas TEX 05P Impact Energy 17.2J 6.1J Air Consumption 11.66 l/s 9.5 l/s Steel Size HEX 19x50mm HAV Rating Breaking concrete: 4.5 m/s² Breaking concrete: 13 m/s² Sound Levels 102 / -- dB(A) 105 / 93 dB(A) Weight 5.6kg 5.5kg
Demolition picks offer increased impact energy over chipping hammers and are suited to both floor and vertical demolition and trenching for civil engineering and utilities applications. • Integrated automatic lubrication system Code AT062 AT063 Description Light Demo Hammer (Anti Vib) Demo Hammer (Anti Vib) Model Atlas TEX 09PE Yokota 10HDHVC H Atlas TEX 12PE Yokota 12HDHVC H Impact Energy 18J 52J 25J 81.2J Air Consumption 17 l/s 16.6 l/s 20 l/s 16.6 l/s Steel Size HEX 22x82.5mm HAV Rating 4.6 m/s² 5.05 m/s² 5.3 m/s² 5.6 m/s² Sound Levels 105 / 93 dB(A) 102 / -- dB(A) 105 / 93 dB(A) 101 / -- dB(A) Weight 10.5kg 10kg 12kg 12kg
17 / Breaking and Demolition
AT004
AT011
Clay Diggers Application: handheld ground breaking Materials: clay | soft ground
Rock Drills Application: stone drilling Materials: hard stone
Clay diggers are highly suited to piling and trenching works. Perfectly suited for restricted areas such as utilities trenches and applications where greater manoeuvrability is required. • Integrated noise muffler for operator comfort Code AT004 Description Clay Digger Model Chicago Pneumatic FL 0022 Yokota TCD-20 Air Consumption 21 l/s 18 l/s Steel Size Square 19 x 82mm HEX 22x82mm HAV Rating 21.9 m/s² 16 m/s² Sound Levels 105 / 89 dB(A) 106 / -- dB(A) Weight 10kg 11.4kg
Rock drills are specifically designed for drilling into hard stone and rock. Suitable for blast hole quarry drilling along with bank stabilisation works. • Integrated noise muffler for operator comfort
Code
AT048
Description
Rock Drill
Model
Atlas BBD 15E
Yokota TJ-15SV LBS
Air Consumption
22 l/s
26 l/s
Steel Size
HEX 19x108mm
HEX 22x108mm
HAV Rating Drilling stone: 7 m/s²
Drilling stone: 7 m/s²
Sound Levels
110 / 97 dB(A)
-- / 99 dB(A)
Weight
15.5kg
17.4kg
Breaking and Demolition / 18
ET072
ET026
Demolition Hammers Application: handheld demolition Materials: concrete | brick | tiles
Needle Scaler Application: light duty concrete removal Materials: concrete | rebar | steel
Robust and strong, our demolition hammers can be used for prolonged periods on vertical surfaces, making short work of interior walls, floors and brickwork. A suitable solution for creating window and doorway openings. Hollow drill bits are available which, partnered with dust extraction attachments, protect from fine silica dust. • All models are SMS MAX
A series of needle attachments specially designed for rebar exposure, removing rust and paint from metallic surfaces and light chiselling work. With a series of oscillating needles, this tool can also be used to texture concrete. • Cleansing action without the need for a compressor • Wear charge on needles is £5.00 each per week
Code
ET072
ET170
Code
ET025
ET081
ET026
5kg Demolition Hammer 10kg Demolition Hammer Model Hilti TE 500-AVR Hilti TE 700-AVR Hilti TE 800-AVR Power 1100W 1300W 1850W 8kg Demolition Hammer
Description
Needle Scaler
Cordless Needle Scaler
Description
Model Power
Hilti TE 300-AVR
Hilti TE 300-A36
850W
36V
Impact Energy 3.6J HAV Rating Chiselling concrete: 13.5 m/s² Chiselling concrete: 7.9 m/s² Sound Levels -- / 91 dB(A) -- / 88 dB(A) Weight 3.8kg 4.9kg 3.3J
Impact Energy HAV Rating (Chiselling concrete) Sound Levels
7.5J
11.5J
17.5 / 21J
6.8 m/s²
6.5 m/s²
8 m/s²
-- / 84 dB(A)
-- / 86 dB(A)
-- / 87 dB(A)
Weight
6.3kg
7.9kg
10.6kg
19 / Breaking and Demolition
ET083
AT046
Electric Breakers Application: road and pavement breaking Materials: asphalt | reinforced concrete | tarmac
Air Breakers Application: road and pavement breaking Materials: asphalt | concrete | tarmac | clay
Hard hitting and capable of breaking up large areas of concrete, paths and asphalt. Powered by 110V power supply, electric breakers produce no emissions and are suitable for indoor work sites and operating in confined spaces. • Anti-vibration handles Code ET083 ET160 ET016 Description 12.5kg Electric Breaker 14.5kg Electric Breaker 30kg Electric Breaker Model Hilti TE 1000-AVR Hilti TE 2000- AVR Hilti TE 3000- AVR Impact Energy 26J 35J 68J Steel Size TE-S HEX 28mm HAV Rating (Chiselling concrete) 6.8 m/s² 4.8 m/s² 7 m/s² Sound Levels -- / 85 dB(A) -- / 77 dB(A) 105 / 94 dB(A) Weight 12.5kg 14.5kg 29.9kg
Air (pneumatic) breakers are suitable for heavy industrial construction work, demolition and civil engineering applications. They can also be used for pavement, road and highway repairs as well as trenching for utilities repair and installation. • Integrated noise muffler for operator comfort Code AT046 Description Air Breaker Model Atlas RTEX Yokota 25PBVC-32 Air Consumption 18 l/s 23.3 l/s Impact Energy 68J 112J Steel Size HEX 32x 152mm | 32x160mm HEX 32 x 160mm HAV Rating 5 m/s² 5.2 m/s² Sound Levels 107 / 90 dB(A) 102 / -- dB(A) Weight 25kg
Breaking and Demolition / 20
HB009
HB015
2-Stroke Breakers Application: road and pavement breaking Materials: asphalt | concrete | tarmac | clay
Hydraulic Breakers Application: road and pavement breaking
Materials: asphalt | reinforced concrete | tarmac | clay Robust cast steel construction make these breakers widely known as the number one choice for utilities, highways and rail industries due to their unrivalled power. Making short work when breaking pavements, roads, concrete and slabs, these breakers offer extremely high productivity. • Sealed hydraulic system eliminates freezing problems • Damped handles reduce vibration and noise levels Code HB011 HB015 HB012 Description Anti-Vib 28kg Breaker 28kg Breaker 29kg Breaker Model JCB HM25LV JCB HM25 JCB HM29 Steel Size HEX 32mm (1¼) HAV Rating 1.6 m/s² 4 m/s² 5 m/s² Sound Levels -- / -- dB(A) -- / -- dB(A) -- / -- dB(A) Weight 27kg 26kg 29kg
For unhindered use on-site, the petrol breaker provides the same impact energy as a medium duty pneumatic/hydraulic breaker, without being connected to a compressor or power pack and its peripheral equipment. Electronic fuel injection on the Atlas model offers less fuel usage and more power regardless of climate and altitude. • Vibration dampening
Code
HB009
Description
2-Stroke Breaker
Model
Atlas Copco Cobra PROi
Wacker BH55rw
Impact Energy
60J
55J
HEX 28x152mm | 32x160mm
Steel Size
HEX 32x160mm
HAV Rating
3.8 m/s²
4.6 m/s²
Sound Levels
109 / 96 dB(A)
109 / 101 dB(A)
Weight
24kg
26kg
21 / Breaking and Demolition
DRILLING & DIRECT FIXING
Breaking and Demolition / 22
ET020
ET020
SDS+ Combi Hammers Application: drilling and light chiselling Materials: concrete | masonry | stone
Designed for prolonged drilling in concrete and masonry, SDS+ drills are a site all-rounder used by most tradesmen. Capable of drilling into masonry and concrete, they also have the ability for light chiselling and as a secondary function. All models come with dedicated dust extraction attachments as an additional hire option.
SDS+ COMBI HAMMERS (2KG - 4KG)
Code
ET019
ET020
Description
2kg Combi Hammer
4kg Combi Hammer
Model Power
Hilti TE 2
Hilti TE7C
Hilti TE 3-M
Hilti TE 30-AVR
650W
720W
850W
1010W
Impact Energy
1.8J
2.6J
2.5J
3.6J
Hammer drilling concrete: 13.5 m/s²
Hammer drilling concrete: 15.5 m/s²
HAV Rating
Hammer drilling concrete: 17 m/s²
Hammer drilling concrete: 9.3 m/s²
Sound Levels
-- / 91 dB(A)
-- / 89 dB(A)
-- / 92 dB(A)
-- / 92 dB(A)
Weight
2.7kg
3.4kg
3.1kg
4.2kg
23 / Drilling & Direct Fixing
ET023
ET022
SDS MAX Combi Hammers Application: heavy-duty drilling and breaking Materials: reinforced concrete | masonry | stone
Larger than SDS+ systems, SDS MAX combi hammers offer the ultimate in combined drilling and breaking power and performance. A hybrid machine designed for sustained heavy duty applications that include a mix of breaking, drilling and hammer drilling. Products come with vibration reduction technology (AVR) that dampen vibrations received by the operator, allowing for sustained use.
SDS MAX COMBI HAMMERS (6KG - I0KG)
Code
ET021
ET093
ET022
ET023
Description
6kg Combi Hammer
Combi Hammer TE60 Hilti TE 60-ATC-AVR
8kg Combi Hammer
10kg Combi Hammer Hilti TE 80-ATC-AVR
Model Power
Hilti TE 50-ATC
Makita HR4013C
Hilti TE 70-ATC
1100W
1000W
1350W
1800W
1800W
Impact Energy
6J
8J
7.8J
11.5J
11.5J
HAV Rating (Hammer Drilling Concrete)
9 m/s²
5 m/s²
6.4 m/s²
10 m/s²
7.5 m/s²
Sound Levels
-- / 91 dB(A)
-- / -- dB(A)
-- / -- dB(A)
-- / -- dB(A)
-- / -- dB(A)
Weight
6.1kg
6.8kg
7.8kg
8.3kg
9.7kg
Drilling & Direct Fixing / 24
ET092
MD001
Drill Drivers Application: hammer and rotary drilling Materials: concrete | steel | wood
Magnetic Drills Application: drilling in steel Materials: steel | iron
Traditional high-torque hammer drill drivers are ideal for prolonged drilling in sheet metal and screwdriving, with the UH 700 capable of rotary drilling in metal, wood and also capable of hammer drilling in masonry. Both drills have a chuck clamping range of 2-13mm. Offering greater torque over cordless variants, these are an ideal choice in manufacturing and workshop environments.
For boring clean, accurate holes in iron and steel, the powerful electromagnetic clamp ensures a perfect cut. Unique cutting heads allow for a much faster and more efficient cutting rate than a conventional drill. An ideal product for sites involving pylons or large-scale steel erection. • Fitted with safety chain/strap Code MD001 MD003 Description Magnetic Mini Bore Drill Rotabroach Drill Model Unibor H32 Unibor EQ50 Max Drilling Depth 135mm 106mm RPM 550 Gear 1: 280 | Gear 2: 550 HAV Rating Metal Drilling: 2.25 m/s² Metal Drilling: 1.95 m/s² Sound Levels 98 / 85 dB(A) 97 / 84 dB(A) Weight 11.2kg 18.5kg
Code
ET092
Description 10mm Metal Drill Driver
13mm Drill Driver
Model Power
Hilti UD30
Hilti UH 700
650W 51Nm
710W
Max torque
80Nm
Wood: 38mm Masonry: 13mm Steel: 13mm
Steel: 13mm Wood: 50mm
Max Drilling Depth
HAV Rating Metal Drilling: 3.5 m/s²
Metal Drilling: 2.5 m/s²
Sound Levels
-- / -- dB(A)
-- / -- dB(A)
Weight
2.4kg
2.6kg
25 / Drilling & Direct Fixing
DD004
DD003
Diamond Core Drills Application: core drilling Materials: concrete | masonry
Diamond Drill Rigs Application: heavy core drilling Materials: concrete | masonry
Designed for handheld drilling through masonry and concrete. Core drills cut smooth, clean holes to allow for piping, cables, electrical wiring and fittings to pass through walls and ceilings. Two speed gearing for optimum speed and torque
Designed specifically for wide core drilling into reinforced concrete, these prove ideal for penetration for ducts, pipes, cables and openings for ventilation. • Vacuum/anchor base plate • Extension bars of 300mm for use on bits over 400mm Code DD024 DD003 Description Diamond Drill DD200 Rig Diamond Drill DD250E Rig Model Hilti DD 200 Hilti DD 250 Max Drilling Depth 500mm 500mm Drilling Range 25-400mm 12-450mm HAV Rating Wet Drilling: 2.5 m/s² Drilling: 2.5 m/s² Sound Levels 105 / 92 dB(A) 109 / 93 dB(A) Weight Drill: 13.9kg | Stand: 18.3kg Complete Rig: 32.2kg Drill: 15.3kg | Stand: 21.7kg Complete Rig: 37kg
Code DD006
DD001
DD004
DD028
Description Diamond Drill Diamond Drill - DD 150 Model Makita DBM131 Hilti DD 100 Hilti DD 110-D Hilti DD 150 Operation Wet & Dry Dry Dry Wet & Dry Power 1500W 1600W 1600W 2000W Drilling Range 70-82mm 25-162mm 16-162mm 37-131mm HAV Rating Drilling: 2.5 m/s² Drilling: -- m/s² Drilling: -- m/s² Wet Drilling: 7 m/s² Diamond Drill - DD 100 Diamond Drill - DD 110
Sound Levels Weight
-- / -- dB(A)
-- / 84 dB(A)
-- / 84 dB(A)
98 / 87 dB(A)
6.8kg
5.3kg
5.3kg
8.2kg
Drilling & Direct Fixing / 26
Impact Wrenches Application: tightening/loosening of bolts
ET096
These powerful tools are designed for repetitive tightening and loosening of stubborn bolts, making them an ideal choice for heavy manufacturing, steel frameworking and offshore work. These are designed for continous use and offer greater torque over cordless models. Code ET074 ET096 Description 13mm (1/2”) Impact Wrench 19mm (3/4”) Impact Wrench Model Makita TW0250 Makita 6906 Power 500W 650W Max Torque 250Nm 588Nm Standard Bolt M10 - M20 M16 - M22 HAV Rating Fastening Bolts: 11 m/s² Fastening Bolts: 16.5 m/s² Sound Levels 104 / 93 dB(A) 109 / 98 dB(A) Weight 2.1kg 5.6kg
Fixing Tools Application: direct fastening of materials Materials: concrete | masonry | steel | aluminium
CT021
Our gas fixing tools offer a higher impact rate than battery equivalents and practical option for material fastening on- site. These tools have a powerful impact rate that is capable of fastening materials such as steel tracking, plasterboard, trunking and conduits to surfaces such as hard concrete, masonry and steel.
• Single gas canister can fasten up to 1,200 fires • CT009 takes up to 97mm nails with pre-drive
Code
CT021
CT009
Description
Gas Fixing Tool
Cartridge Fixing Tool
Model
Hilti GX 3
Hilti DX 460
Hilti DX 5
Impact Energy
100J
325J
325J
HAV Rating
Recoil: 3.64 m/s²
-- m/s²
-- m/s²
Sound Levels
105 / 133 (Peak) dB(A)
105 / 133 (Peak) dB(A)
105 / 133 (Peak) dB(A)
Weight
4kg
4kg
3.64kg
27 / Drilling & Direct Fixing
CT011
ET085
Framing Nailers Application: nailing wooden framing and battens Materials: timber The first choice fastening tool for wood framing applications, can be used for roof battening, truss work, timber framing, stud work, joists, floor boarding, decking, fencing and hoarding. Popular for roofers, joiners and contactors these tools offer exceptional impact energy - driving nails of up to 90mm deep into wood. · Excellent productivity through high performance quick charge lithium battery: up to 9,000 shots per single charge
Drywall Screwdriver Application: plasterboard fixing
Materials: plasterboard | wooden boards | metal studs Primarily used for fixing drywall panels, it can also be used to fix wooden boards, specialised boards such as fermacell boards and exterior sheathing boards to wood and metal ceilings and walls. Allows for continuous fixing of boards on large scale jobsites and projects with mains power. • Can be used with Hilti Autofeed attachment Code ET085 Description Drywall Screwdriver Model Hilti SD 6000 Max Torque 8 Nm HAV Rating Screwdriving: 3 m/s² Sound Levels 98 / 85 dB(A) Weight 1.4kg
Code
CT011
Description
Framing Nail Gun
Model
Paslode IM350+
Hilti GX 90-F
Impact Energy
82J
85J
Magazine Capacity Nail / Brad Range
55
90
50-90mm
50-90mm
HAV Rating
2.6 m/s²
2.5 m/s²
Sound Levels
102 / 89 dB(A)
108 / 138 (Peak) dB(A)
Weight
3.3kg
3.7kg
Drilling & Direct Fixing / 28
SAWING CUTTING AND GRINDING
29 / Sawing, Cutting & Grinding
SS001
SS003
Circular Saws Application: precision straight-line wood cutting Materials: softwoods | hardwoods | laminates
Jigsaws Application: precision cutting Materials: wood | sheet metal | plastic | laminates Versatile and mobile, suitable for cutting straight or curved lines in wood, plastic or sheet metal on interior sites. Features a compact and lightweight design with ergonomic rubberised handle and a adjustable base for maximum precision cutting.
Make short work of cutting large timber. Able to cut straight or angled lines. Suitable for trimming and fitting wood and sheet materials, cutting formwork boards, planks, battens, OSB, chipboard, plywood and plastics. Can be used for general carpentry work such as cutting rafters to length, cutting tenons, and trimming roof battens to length.
Code
SS001
SS002
Code
SS003
Description
6” Circular Saw
9” Circular Saw
Description
Electric Jigsaws
Model Makita 4350CT Max Cutting Depth Steel: 10mm | Wood: 150mm Steel: 10mm | Wood: 135mm Sawing metal: 8.0 m/s² Sawing metal: 4.5 m/s² Sound Levels 100 dB(A) 95dB(A) Weight 2.4kg 2.5kg Hilti SJD 6 D-HANDLE ORBITAL
Model Power
Hilti SC 55W
Hilti WSC 85
1100W 55mm
1650W 85mm
Max Cutting Depth Max Blade Diameter
160-165mm
207-230mm
HAV Rating Sawing wood: 2.12 m/s²
Sawing wood: 2.3 m/s²
Sound Levels
101 / 90 dB(A)
105 / 94 dB(A)
Weight
4.7kg
7.8kg
Sawing, Cutting & Grinding / 30
SS007
WC002
Wall Chasers Application: cutting linear slits into masonry Materials: concrete | brick | stone | flint
Reciprocating Saws Application: freehand cutting and demolition
Utilising twin diamond blades, wall chasers can cut deep slots into brick, stone, flint, limestone or concrete. This product doubles productivity compared to a single bladed variant and allows for an easy and perfectly straight cut. Ideal for the installation of cabling, conduits or piping installations. • Easy and precise cutting depth and width adjustment
Materials: wood | steel | aluminium | plastic | fibreglass Heavy-duty demolition saw, allows straight or angled cuts vertically and above shoulder height. An ideal tool for roofing jobs, window frame cutting, woodwork, metal bars, plastic piping and conduit sizing tasks. Code SS007 Description Reciprocating Saw Model Hilti SR 30 Makita JR3070CT Power 1400W 1510W Stroke Length 32mm
Code
WC002
Description
Wall Chaser - Twin Blade
Model Power
Hilti DC-SE 20
1700W 40mm 46mm
Max Cutting Depth Max Cutting Width
Sawing Chipboard: 1.7 m/s²
Cutting Board: 9.5 m/s² Cutting Beams: 10.5 m/s²
HAV Rating
Sawing Beams: 19 m/s²
HAV Rating
Cutting concrete: 5.8 m/s²
Sound Levels
98 dB(A)
100 / 89 dB(A)
Sound Levels
111 / 100 dB(A)
Weight
4.8kg
4.6kg
Weight
6.9kg
33 / Sawing, Cutting & Grinding
SS009
ET030
Electric Saws Application: freehand concrete cutting Materials: concrete | stone | masonry | metal | plastics Electric saws use diamond blades to dry cut concrete and the ability to change blades allows for a varied range of cutting materials. Specially designed tools are made for cutting linear paths vertically in concrete, making them a powerful and safe option for wall cutting and preliminary cuts for controlled demolition.
Angle Grinders Application: cutting metal and grinding stone Materials: steel | stone | concrete
Powerful and universal tool used for all cutting and grinding applications. Can be used for various applications due to a large range of interchangeable discs and blades. Suitable for cutting and grinding steel and mineral base products, removing coatings on cement and screed, cutting and fine grinding of metal, cutting channels for cables. Code ET029 ET030 Description Angle Grinder 4”/5” Angle Grinder 7”/9” Model Hilti AG 125-13S Hilti AG 230-24D Makita GA9020 Disc Diameter 125mm 230mm Max Cutting Depth 35mm 60mm HAV Rating Grinding: 5.3 m/s² Grinding: 5.8 m/s² Grinding: 5.5 m/s² Sound Levels 102 / 91 dB (A) 1 105 / 94 dB (A) 1 100 / 89 dB (A) 1 Weight 2.5kg 6.5kg 8.05kg
Code
SS009
SS044
SS170
Description 12” Electric Saw
14” Electric Saw
Model Power
Hilti DCH 300-X Husqvarna K 4000 Diaquip QHS-400
2300W 120mm 305mm 5.1 m/s²
2700W 125mm 350mm 3.5 m/s²
1700W 150mm 400mm 3.9 m/s²
Max Cutting Depth
Blade Diameter
HAV Rating
Sound Levels 117 / 106 dB(A)
110 / 99 dB(A)
116 / 105 dB(A)
Weight
9.4kg
8.5kg
9.1kg
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56Made with FlippingBook Digital Publishing Software