Valencia
Valencia Cremagliera a clip Clip Uprights
Valencia è un sistema a cremagliere e doghe orizzontale che concentra le migliori caratteristiche dei prodotti Metalika, permettendo anche la regolazione della stessa durante e dopo il fissaggio. Mantiene grazie al connettore Plug.in le caratteristiche di elettrificazione, ora disponibile anche per accessori con spessori di 25/10. Valencia is a rack system and horizontal slat that concentrates the best characteristics of Metalika products, also allowing its adjustment during and after fixing. Thanks to the Plug.in connector, it maintains the electrification characteristics, now also available for accessories with thicknesses of 25/10.
Compatibile con Compatible with Plug.in pg. 5
KC50
La cremagliera KC50 ha una feritoia di 5 mm, viene attrezzata con staffe laterali o centrale per creare la disposizione voluta. The KC50 rack has a 5 mm slot and is equipped with side or center brackets to create the desired configuration.
KC50
5
2
– Valencia –
KC51
5
La doga KC51 ha una feritoia di 5 mm, può sostenere ripiani con spessore di 3 mm o pensili sospesi. The KC51 shelf support has a 5 mm slot and can support 3 mm thick shelves or wall-mounted cabinets.
KC52
La cremagliera KC52 ha una feritoia di 8 mm, viene attrezzata con coppie di staffe, ogni ripiano è svincolato dall’altro. The KC52 rack has an 8-mm slotted opening and is equipped with pairs of brackets; each shelf is independent of the others.
KC52
8
3
– Valencia –
KC50, KC52 Cremagliera a clip Clip Uprights
Caratteristiche tecniche cremagliere Valencia Valencia’s racks tecnical features
Esempio di installazione della cremagliera. Le piastre laterali permettono la regolazione nelle due dimensioni(profondità e larghezza). L’altezza è invece determinata dal livellatore che può essere manovrato anche dopo l’installazione dei pannelli e ripiani. L’istallazione prevede l’inserimento dei pannelli da 18 o 19 mm. Nel caso della cremagliera monofilareKC50, le staffe vengono agganciate prima sulla cremagliera e poi inserito il ripiano, Se si tratta di KC52 possiamo installare prima le staffe sul ripiano e poi a cremagliera. Example of rack installation. The side plates allow adjustment in two dimensions (depth and width). The height is determined by the leveler, which can be adjusted even after the panels and shelves have been installed. The installation involves inserting 18 or 19 mm panels. In the case of the KC50 single-rail rack, the brackets are first hooked onto the rail and then the panels are inserted. Installation involves inserting 18 or 19 mm panels. In the case of the KC50 single-rail rack, the brackets are first hooked onto the rack and then the shelf is inserted. In the case of the KC52, we can first install the brackets on the shelf and then on the rack.
Panoramica Overview
Funzionalità Features
KC50/KC52
KF01
Il livellatore permette di regolare in altezza (fino a 22 mm) la cremagliera, con una chiave esagonale 4 mm. The leveling device allows you to adjust the height of the rack (up to 22 mm) using a 4 mm hex wrench.
Ripiano Shelf
KM32
Ingombri Dimensions
±12 mm
+10 mm
18/19 mm
Uscita cavo superiore con connettore per driver Top cable exit with driver direct connector.
4
– Valencia –
KC51 Doga a clip Clip slat
Caratteristiche tecniche doga Valencia Valencia’s slat tecnical features
Esempio di installazione della doga. Le piastre superiori e inferiori permettono la regolazione nelle due dimensioni (profondità e altezza). Può sostenere un ripiano o una staffa per pensili, con spessore 3 mm. Il connettore Plug.in, KCE.25, ne permette l’elettrificazione. L’istallazione prevede l’inserimento dei pannelli da 18 o 19 mm. Example of slat installation. The top and bottom panels can be adjusted in two dimensions (depth and height). They can support a shelf or a wall cabinet bracket with a thickness of 3 mm. The Plug.in connector, KCE.25, allows for electrical wiring. The installation requires the use of 18- or 19-mm panels.
Ingombri Dimensions
Funzionalità Features
±5
18/19
±12
KC51
KM33 KM34
KF01
Plug.in connector Plug.in connector
Plug.in connector è un dispositivo compatibile con le cremagliere elettrificate, permette tramite apposite staffe di prelevare corrente in bassa tensione per elettrificare ripiani barre appenderie o altro. Plug.in connector is a device compatible with electrified racks, it allows using special brackets to take low voltage current to electrify hanging bars shelves hangers or something else.
Esempio di onfigurazione Configuration example
Articoli Items
Connettori PLUG-IN PLUG-IN Connector - KCE.25 (sp./thk. 25/10)
Elettrificato Electrified
Binario elettrificato KCE Electrified track KCE
Senza elettrificazione Without electrification
Elettrificato Electrified
5
– Valencia –
Cremagliera a clip Clip upright Cremagliera unifilare Single slot rack
KC50 - KC50E
Cremagliera regolabile unifilare Single slot adjustable upright
KC50 è uns sistema a clip regolabile nelle 3 dimensioni, l’anima è KC48, cremagliera a foro singolo elettrificabile con minitrak. KC50 is an adjustable clip system in 3 dimensions, the core is KC48, electrifiable single hole rack with minitrak.
18/19
KM_32 - KM32C
KM32 - KME32 Coppia mensole laterali in alluminio h.35 Pair of aluminium side shelves h.35 KM32C - KME32C Mensola centrale in alluminio h.35 Central aluminium shelf h.35 Elettrificato con/ electrified with Plug.in: KCE.25 Mensole laterali per ripiano in legno o ripiano a telaio per vetro/ Side brackets for wooden shelves or glass-framed shelves
Ripiano in vetro/ glass shelf
Ripiano in legno/ wooden shelf
5/6
35
Ripiano in vetro/ glass shelf
Ripiano in legno/ wooden shelf
5/6
35
6
– Valencia –
KME32T
Kit ripiano vetro per staffe KM/KME32 Glass shelf kit for KM/KME32 brackets Ripiano a telaio per vetro compatibile con staffe KM/KME32 Frame-mounted glass shelf compatible with KM/KME32 brackets Spessore vetro/ Glass Thk: 5/6 mm
Elettificazione/ Electrification
Strip LED + opalino
Flex LED 4x8 mm
7
– Valencia –
Doga a clip Clip slat
KC51 - KC51E
Doga orizzontale Horizontal slat
KC51 è un profilo doga che puè essere abbinato alle cremagliere KC50 e KC52. Come la cremagliera unifilare KC50 permette una distanza tra i pannelli di 5 mm. KC51 is a slat profile that can be used with the KC50 and KC52 uprights. Like the KC50 single-track rail, it allows for a 5 mm gap between panels.
Guarnizione/ gasket Art.QU02G.30TR
KC51 Anodizzato nero/ black anodized
KC51
KC51E
Minitrak
KC51 Anodizzato nero/ black anodized
Guarnizione/ gasket Art.QU02G.30TR
KM_33
Mensola in acciaio Steel shelf Ripiano per profilo KC51 realizzabile su misura. Elettrificabile con KCE.25 Shelf for KC51 profile, available in custom sizes. Can be electrified with KCE.25
18/19
8
– Valencia –
KM_34
Staffa per pensili Wall Cabinet Brackets Staffa per profilo KC51, con 4 fori svasati. Elettrificabile con KCE.25 KC51 profile bracket with 4 flared holes. Compatible with KCE.25 for electrical wiring
18/19
4/5
Ripiano con lampada magnetica DLE32 Shelf with magnetic lamp DLE32
9
– Valencia –
Cremagliera a clip Clip upright Cremagliera unifilare Single slot rack
KC52 - KC52E
Cremagliera regolabile a foro largo Wide sloti adjustable upright KC52 è uns sistema a clip regolabile nelle 3 dimensioni, l’anima è KC47, cremagliera a foro largo elettrificabile con minitrak e profilo “W” posteriore. KC52 is a clip system that can be adjusted in three dimensions. Its core is KC47, a wide-hole rack that can be electrified with Minitrak and a rear “W” profile.
18/19
KM35 - KME35
KM35 Coppia reggimensole per legno Pair of wooden shelf brackets KME35 Coppia reggimensole per legno elettrificate Pair of electrified wooden shelf brackets con/with Plug.in: KCE.25 Spessore/ thickness: 25/10 Con fori svasati/ with flared holes: Ø5 mm
Ripiano in legno/ wooden shelf
MAX 35
MIN 25
17.7
130
130
40
35.4
350
17.7
200
200
40
17.7
35.4
17.7
500
10
– Valencia –
KM77 - KME77
KM77 Ripiano a telaio per vetro Frame shelf for glass KME77 Ripiano a telaio elettrificato per vetro Electrified frame shelf for glass Spessore vetro/ glass thickness: 5/6mm Con connettore/ with connector: KCE.25
5/6
35
18
Gommino per vetro/ glass rubber seal
profilo di copertura/ cover profile
MAX 1005 VETRO/GLASS 1000-1/2
11
– Valencia –
Metalika Srl 31048 San Biagio di Callalta (TV) 0422 980174
info@metalika.it www.metalika.it
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12Made with FlippingBook - professional solution for displaying marketing and sales documents online