Skip & Rollon-Rolloff (Roro) Vehicle Operations: Risk Assessment Doc Ref: IM 101
No
Hazard / Risk
Control Measures
Additional control measures/Site specific Driver assessor – See driver assessor form.
Hit a pedestrian /cyclist/other road user/property
Driver to hold licence for the vehicle.
1a
•
•
• Initial driver assessment and vehicle familiarisation with driver assessor • Driver has valid medical assessment. • Drivers to wear seat belts at all times, unless travelling less than 50m between collections or reversing. • Annual driver assessment or following an incident. • Use of all available safety aids e.g. mirrors, reversing cameras, reversing assistant, alarms and beacons • Daily vehicle checks • Keep dashboard clear. • Do not use mobile devices while driving. • Lifting equipment is in the in-travel position when driving. • Use hazard/flashing beacons when reversing and operating on customers sites. • Vehicles fitted with reverse warning devices
●
Hit overhead obstruction
●
Travelling height marker in the cab
Daily vehicle checks include vehicle height indicator
1b
● Driver to adhere to the highway code at all times. ● Check height clearance before lifting/loading containers. ● Driver to complete Dynamic Risk Assessment Prior to off-loading any container. If in doubt STOP! ● Lifting equipment in stowed position when the vehicle is moving at all times. ● Driver to carry out visual checks looking for overhead cables, trees etc.
Page 2
Document Issue 01 21/08/2024 Approved by: AB
ISO 9001 / ISO 14001 / ISO 45001/PAS99: 2012
Not Controlled if printed
Made with FlippingBook Digital Publishing Software