Skip & Rollon-Rolloff (Roro) Vehicle Operations: Risk Assessment Doc Ref: IM 101
No
Hazard / Risk
Control Measures
Additional control measures/Site specific
Infection from exposure to hazardous waste, chemicals or vermin Moving parts on the bin
● Use proper lifting techniques (bend knees, keep back straight). ● Be cautious and move slowly, especially in areas with uneven, slippery surfaces. ● Wear appropriate non-slip footwear. ● Be vigilant and aware of surroundings. ● Always use high-visibility clothing when operating out of the vehicle. ● Inspect the bin for protruding objects before moving or sheeting. ● Check the bin for damage before moving. ● Report defective bins. ● If container is blocked, seek assistance from site staff/customer before moving any items. ● Avoid direct contact with the waste. ● Clean hands before eating, drinking smoking. ● Report all safety concerns/Near Misses & Incidents/Accidents ● Secure lids & doors before moving containers – Lifting or tipping. ● Driver training (Skip, RORO) ● Carry spare door pins and sheet loads at all times. ● Ensure pins are in good condition, bent pins are not used and replaced. Do not move without secondary locking pin in place on large containers. ● Do not place hands in door opening without the door secured in the locked position or door prop.
Crush injuries
10
Lids/Doors or containers
Hit by lid/container during lifting/blown by wind.
Hit by container door or lever (Compactors and open containers)
Page 7
Document Issue 01 21/08/2024 Approved by: AB
ISO 9001 / ISO 14001 / ISO 45001/PAS99: 2012
Not Controlled if printed
Made with FlippingBook Digital Publishing Software